Version 1.0.5 online
Sven Schlender
die Version 1.0.5 für eWicht ist online.
Es gibt einige neue Features und jede Menge Bugfixes.
Hier die News-Liste:
Webinterface:
- Added a restart button to the index.htm on the web interface.
- The protocol addresses (min and max) can be the same now.
- Added the "Delay" value to the GA page.
- Changed the GA maximum allowed port to 7.
- Added a change common settings page and added LCD backlight settings to
the
page.
- Changed the CSS stylesheet a bit to the look and feel of the project web
pages.
Firmware:
- Switching off all the F-LEDs when changing from GL to GA.
- Restructured the manual for a better readability.
- Added a timeout (2 seconds) when sending a command to the server and
getting
no answer.
- Fixed a bug in the turbo encoder algorithm - I think the available speed
steps are ok now.
- Added quick switch over between GLs and GAs:
GA active -> Single push on GL button -> Shows last active GL
GL active -> Single push on GA button -> Shows last active GA (resp.
port)
- Added support for delaying GAs (Delay is always 0 when disabling a port).
- Workarround for GA-Bug works well at srcpd now!
- Fixed the "a"-Bug at the name dialog. Implemented F1-F4 support for all,
IP and SRCP dialogs. F1 goes back to the previous menu item, F4 to the next
item, F2 has the Escape function (changed from the power button), F3 has the
backspace function (changed from the accessory button).
- Fastened the switch over time between IP digits in the IP dialogs.
- Make the LCD backlight switchable (without new display commands) and
configurable from the web interface.
Gruß, Sven.