Re: [Everything F&J] 12 NC

[COR...@aol.com]

Does your engine have a flywheel governor?  If so, it may be sticking as the engine warms up.  Remember, if you have a flywheel gov. you must move the weight towards the outside of the flywheel to slow the engine down.  I don't know what the HP of your engine is, but it would be called a (X) NC ie: 3 NC. 

 

Stan Johnson

 

In a message dated 4/15/2010 8:53:22 P.M. Eastern Standard Time, gnsw...@netins.net writes:

I have a Fuller and Johnson NC open flywheel with the spark plug in a
pipe that sticks out from the head about 3". New EK mag, It starts
right up in a turn or so and runs great for about five or ten min.
once it gets good and warmed up it starts to race out of control.
Whats up? Has anybody experienced this before? And how do you time one
of these. And what is the proper name of this engine.Thanks Glenn

--
You received this message because you are subscribed to the Google Groups "Everything Fuller and Johnson" group.
To post to this group, send email to everything-ful...@googlegroups.com.
To unsubscribe from this group, send email to everything-fuller-an...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/everything-fuller-and-johnson?hl=en.

--
You received this message because you are subscribed to the Google Groups "Everything Fuller and Johnson" group.
To post to this group, send email to everything-ful...@googlegroups.com.
To unsubscribe from this group, send email to everything-fuller-an...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/everything-fuller-and-johnson?hl=en.

[wormmaker]

Thanks I will try that. It seems to miss fire on a couple hits then by
the time it fires it really hammers, with all the extra fuel and over
speeds then it does it again, now its starting to jump around so I
need to shut it down. When its cold it runs perfect. It is a 1 1/2hp

On Apr 17, 9:40 am, CORP...@aol.com wrote:
> Does your engine have a flywheel governor?  If so, it may be sticking  as
> the engine warms up.  Remember, if you have a flywheel gov. you must  move
> the weight towards the outside of the flywheel to slow the engine  down.  I
> don't know what the HP of your engine is, but it would be called a  (X) NC ie:
> 3 NC.  
>
> Stan Johnson
>
> In a message dated 4/15/2010 8:53:22 P.M. Eastern Standard Time,  
>

> gnswo...@netins.net writes:
>
> I have a  Fuller and Johnson NC open flywheel with the spark plug in a
> pipe that  sticks out from the head about 3". New EK mag, It starts
> right up in a turn  or so and runs great for about five or ten min.
> once it gets good and  warmed up it starts to race out of control.
> Whats up? Has anybody  experienced this before? And how do you time one
> of these. And what is the  proper name of this engine.Thanks Glenn
>
> --
> You received this  message because you are subscribed to the Google Groups
> "Everything Fuller and  Johnson" group.
> To post to this group, send email to  
> everything-ful...@googlegroups.com.
> To unsubscribe from this  group, send email to  
> everything-fuller-an...@googlegroups.com.
> For more  options, visit this group at  http://groups.google.com/group/everything-fuller-and-johnson?hl=en.
>
> --
> You received this message because you are subscribed to the Google Groups "Everything Fuller and Johnson" group.
> To post to this group, send email to everything-ful...@googlegroups.com.
> To unsubscribe from this group, send email to everything-fuller-an...@googlegroups.com.

> For more options, visit this group athttp://groups.google.com/group/everything-fuller-and-johnson?hl=en.