Driveshaft measurements

[Roy Cameron Sarver]

Does anyone know, offhand, how much you have to shorten the driveshaft
when going from the 7 1/4 inch rear end to the 8 3/4? Any other tips
and/or suggestions will be greatly appreciated. Thanks in advance.

Roy Sarver

[A kaert]

Buy a used drive shaft. That fits

Get Outlook for iOS

---

From: evbc...@googlegroups.com <evbc...@googlegroups.com> on behalf of Roy Cameron Sarver <rcsa...@usjet.net>
Sent: Monday, June 29, 2020 10:48:46 AM
To: evbc...@googlegroups.com <evbc...@googlegroups.com>
Subject: [EVBC] Driveshaft measurements

 

--
You received this message because you are subscribed to the Google Groups "The Early Valiant & Barracuda Club" group.
To unsubscribe from this group and stop receiving emails from it, send an email to evbc-list+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/evbc-list/b89475bb-dc09-d83e-67e4-cb90400e6d81%40usjet.net.

[A kaert]

I have a contact with drive shafts.  Is us. And Canada.   Run an add on. Kijji. That should work.   Need to know.  Model  year and. Auto or standard. To. Pick proper fit

Get Outlook for iOS

---

From: evbc...@googlegroups.com <evbc...@googlegroups.com> on behalf of A kaert <ihavea...@hotmail.com>
Sent: Monday, June 29, 2020 10:50:27 AM
To: evbc...@googlegroups.com <evbc...@googlegroups.com>
Subject: Re: [EVBC] Driveshaft measurements

 

To view this discussion on the web visit https://groups.google.com/d/msgid/evbc-list/DM6PR12MB28110CD7F83D72996CD22D15DF6E0%40DM6PR12MB2811.namprd12.prod.outlook.com.

[Steve Wander]

IIRC its -2.25, 10.09 to 12.35 from axle centerline

To view this discussion on the web visit https://groups.google.com/d/msgid/evbc-list/DM6PR12MB28116402EDFE3EEEF3ADB165DF6E0%40DM6PR12MB2811.namprd12.prod.outlook.com.

--

Steve W.
'65 "S"

[howl...@verizon.net]

https://www.forabodiesonly.com/mopar/threads/shorten-driveshaft-7-25-to-8-75-swap.426214/

-----Original Message-----
From: evbc...@googlegroups.com [mailto:evbc...@googlegroups.com] On Behalf Of Roy Cameron Sarver
Sent: Monday, June 29, 2020 7:49 AM
To: evbc...@googlegroups.com
Subject: [EVBC] Driveshaft measurements

[A kaert]

Bad news you will have to have  a shally cut to fit.  Cause of the original tranny.  I’ll check. The spec on. How. Much to cut

Get Outlook for iOS

---

From: howlands via The Early Valiant & Barracuda Club <evbc...@googlegroups.com>
Sent: Tuesday, June 30, 2020 10:46:21 AM
To: evbc...@googlegroups.com <evbc...@googlegroups.com>
Subject: RE: [EVBC] Driveshaft measurements

 

To view this discussion on the web visit https://groups.google.com/d/msgid/evbc-list/022601d64eed%24396c8fc0%24ac45af40%24%40net.

[Roy Cameron Sarver]

Thank you all for your advice. I appreciate it greatly. Now off to the
shop for a little surgery on my drive shaft.

Roy

[A kaert]

I. Have. A 64 valiant fastback 273 auto.  30 years ago.  Now have. A. 66. 273. Commando. Auto.    I still have. A spate. 65. 273 commando.  If interested

Get Outlook for iOS

---

From: evbc...@googlegroups.com <evbc...@googlegroups.com> on behalf of Roy Cameron Sarver <rcsa...@usjet.net>

Sent: Tuesday, June 30, 2020 11:44:24 AM
To: evbc...@googlegroups.com <evbc...@googlegroups.com>
Subject: [EVBC] Driveshaft measurements

 

Thank you all for your advice. I appreciate it greatly. Now off to the
shop for a little surgery on my drive shaft.

Roy

--
You received this message because you are subscribed to the Google Groups "The Early Valiant & Barracuda Club" group.
To unsubscribe from this group and stop receiving emails from it, send an email to evbc-list+...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/evbc-list/879576f3-860c-b2e4-c4c0-a467be3e6326%40usjet.net.

[A kaert]

I have a friend. In. Quebec who was looking for. A. Commando engine. What’s. The.  Price. Condition. And. Location. Of. Motor

Get Outlook for iOS

---

From: evbc...@googlegroups.com <evbc...@googlegroups.com> on behalf of A kaert <ihavea...@hotmail.com>
Sent: Tuesday, June 30, 2020 11:52:28 AM
To: evbc...@googlegroups.com <evbc...@googlegroups.com>
Subject: Re: [EVBC] Driveshaft measurements

 

To view this discussion on the web visit https://groups.google.com/d/msgid/evbc-list/DM6PR12MB2811F24E809C875C29527FAFDF6F0%40DM6PR12MB2811.namprd12.prod.outlook.com.