Re: Digest for euroscug@googlegroups.com - 3 updates in 1 topic

6 views
Skip to first unread message

Roger Sides

unread,
Feb 3, 2018, 1:17:00 AM2/3/18
to euro...@googlegroups.com
Maybe the air breathers are blocked, seems the same as if the tape has not come off theair holes  cleanly.  Try blowing into the top of the ink cartridge with it over the sink or newspaper and ink should flow freely.  Roger

R and L Sides KIANGA 0478 620 128

On 2 Feb 2018, at 12:20 pm, euro...@googlegroups.com wrote:

Broulee Mike <womba...@gmail.com>: Jan 31 05:15PM -0800

Hi All
We have an inquiry buy a non-member, but I think it is worth a mention and
see what we can come up with.
 
I have a Cannon Pixma G3600 printer that I have just refilled the black ink
in for the first time. However, now it only prints in black intermittently.
I can't find anything on the cannon website to assist with this issue. Any
suggestions please? Thanks
Leslie Willmouth <will...@gmail.com>: Feb 01 12:28PM +1100

Deep clean ;- then print check.
The refilled cassette may be faulty.
 
 
--
Leslie Willmouth
249 Hector McWilliam Drive
TUROSS HEAD. N.S.W. 2537
will...@gmail.com
EuroSCUG Seniors <euro...@gmail.com>: Jan 31 10:08PM -0800

If LeslieMay's suggestions don't correct it, I would suggest:
(1) Changing it for a genuine Canon Cartridge, or
(2) Taking the printer to Cartridge World or equivalent expert to fill or
exchange the cartridge with a non-genuine one
 
On Thursday, 1 February 2018 12:15:29 UTC+11, Broulee Mike wrote:
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to euroscug+u...@googlegroups.com.

Roger Sides

unread,
Feb 3, 2018, 1:27:27 AM2/3/18
to euro...@googlegroups.com
I have some 520 and 521 generic for this printer surplus to requirements as no longer have this printer.  Free can bring next Wednesday.
Refiling only does not work as the chip has to be replaced as well.
Depends on what was done.  Roger
Reply all
Reply to author
Forward
0 new messages