Control Eleven Rack + Line 6 M13 scenes

[jesusb...@gmail.com]

Hi! I got recently the Eleven Rack + FCB1010 w/EurekaProm. I've been reading the different configurations and wonder... would it be possible to control both my 11R and M13 (in Latch Scene mode) in the 11 configuration, or will I have to use the PP configuration? The connection woul be something like this:

FCB1010 MIDI out -> 11R MIDI in

11R MIDI out/thru -> M13 MIDI in

So that when I change a preset in the 11R I change at the same time the scene in the M13... as if I'm creating a "patch" with both devices.

Thanks !!

[Dave]

You could certainly connect it that way and control both of them individually via the PP configuration, each on a separate MIDI channel.

You could try putting them both on the same channel, and aligning the presets, so that one preset command would set both boxes to the same preset #. Kinda complicated though...

[J Bucks]

HI Guys,

I have a Line6 M13 stompbox, my MIDI interface MOTU Expression 128 and my FCB1010 pedal board.

I would like to connect the FCB1010 via the MOTU interface to control in the M13 the looper only.

Could you please tell me how can I do the cable connection and the Midi setup please?

Thanks

[Dave]

If you'd like to be able to send MIDI to the M13 from your computer and your FCB1010, then I connect it like this:

MOTU MIDI Out -> FCB1010 MIDI In, FCB1010 MIDI Out -> M13 MIDI in.

Then use a configuration on the EurekaPROM-enabled FCB1010 that permits pass-thru https://www.eurekasound.com/eurekaprom/misc#h.p_ID_411