Boss GT1000 Core plus Blug Amp 1

21 views
Skip to first unread message

Old Guy

unread,
Sep 15, 2025, 8:10:10 AMSep 15
to EurekaSound! Forum
My 1st post from a complete (old) novice & I am looking at an FCB pedal to  control the above equipment as a System. 
The Amp1 can only accept midi on Ch1 & requires PC commands for channel switch(4 ch) & cc commands for Boost/Power Soak etc.
I think the GT1K core can be set to receive on Ch 2 etc.is there a Eureka Eprom that can be purchased to do this.
I am a real novice but have managed to control the Amp1 midi with the core, so i've sort of made a start .
Thanks.

Dave

unread,
Sep 16, 2025, 8:31:54 PMSep 16
to EurekaSound! Forum
You could control both by connecting both devices in a MIDI chain (FCB1010 MIDI Out -> Device #1 MIDI In, Device #1 MIDI Out -> Device #2 MIDI in).
Use the Amp1 as MIDI channel 1, set the GT1K as MIDI channel 2. Then use the PP configuration to access the channels separately.

Cheers,
Dave

Old Guy

unread,
Sep 17, 2025, 11:42:51 AMSep 17
to EurekaSound! Forum
Sorry i thought i had replied earlier but it seems to have disappeared, thanks for replying, i've read the PP config link, can a send PC codes from the PP config & which version of the Eureka chip do i need, thanks.
Reply all
Reply to author
Forward
0 new messages