Getting MIDI signal to receive setup from DAW

[Craig Wojo]

Hi everyone,

I am looking at how to have a MIDI signal sent to the pedalboard FCB1010 from my DAW and have it set my footswitch loaded for the song.  When I load another song it will send a different setup for the song. Being a street performer I would like to have the setup at least work as possible.
DAW: Cakewalk

VSTs installed on DAW:  Overloud TH-U, Amplitube, Guitar Rig 7.
Windows 11.

Installed chip on FCB1010: EurekaPROM 3.2

Thank you so much.

Craig

[Dave]

When you say "different set up", do you mean that all of the pedals of the FCB1010 would have new definitions? You might be able to do something like that with the EurekaPROM-enabled FCB1010 in the IO configuration with a BOME box programmed to change everything. But the functionality of the FCB1010 alone doesn't allow for changing pedal definitions on the fly.

[Karl Eaves]

It sounds to me that you have it round the wrong way. Do you want the Pedal Board to send a MIDI message (Program Change or CC) to the DAW to get the DAW setup for a different song?

What DAW are you using, could you give an example of how you intend to map the controller to settings in the VSTs and DAW?