Smart Iron Set

1 view
Skip to first unread message

vincent wong

unread,
Jun 3, 2013, 1:37:33 PM6/3/13
to etp-...@googlegroups.com
Hi ppl, 
We are going to do Smart Iron Set

Proposed Ideas
1. Portable Iron board
 Specifications
 Foldable, Folded = 30cm x 15cm
Unfold = 60cm x 15cm
Height 1.5 feet - 2 feet

2. Anti Slipping Mechanism

3. Auto stand with LDR sensor

4. Anti bacterial solutions

Ideas that wont be in proposal and only be done if we have extra time
1. Cordless , Battery

2. Travelling bag / case..
--
Thanks and best regards

Wong Yoong Xiang (Vincent)
BEng (Hons) Electrical and Electronic Engineering.

Universiti Teknologi PETRONAS,
Bandar Seri Iskandar,
31750 Tronoh,
Perak Darul Ridzuan,
Malaysia.

Norhanisah Zubir

unread,
Jun 4, 2013, 1:40:03 PM6/4/13
to etp-...@googlegroups.com
vincent : cuba check dulu, apa patut saya add in.
yg part AC DC tu boleh tlg tak ?


--
You received this message because you are subscribed to the Google Groups "ETP May13" group.
To unsubscribe from this group and stop receiving emails from it, send an email to etp-may13+...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 



--





Best Regards ,



Norhanisah Zubir

..............................

Chemical Engineering Department ,

Third Year First Semester,

UniversitI Teknologi PETRONAS.



abstract & probstatement.docx

muhammad hairi mursalim

unread,
Jun 4, 2013, 2:46:21 PM6/4/13
to Norhanisah Zubir, etp-...@googlegroups.com
ok x mcm ni? klu ada apa2 yg nak kena modify, bgtau ja aku. nnt aku edit 
Regards,
Hairi


"Verily, with every difficulty, there is a relief" (94:6)
330.gif
Hardware,Tools and Software.docx

Norhanisah Zubir

unread,
Jun 5, 2013, 8:39:46 AM6/5/13
to muhammad hairi mursalim, etp-...@googlegroups.com
the updated one. thankyouu
330.gif
abstractUPDATED.docx

Faisal Roslee

unread,
Jun 5, 2013, 9:42:08 AM6/5/13
to Norhanisah Zubir, muhammad hairi mursalim, etp-...@googlegroups.com
Hairi, yang bahagian software tu, boleh tambah solidwork
MUHAMMAD FAISAL REDZWAN MD ROSLEE

330.gif

Faisal Roslee

unread,
Jun 5, 2013, 9:44:25 AM6/5/13
to Norhanisah Zubir, muhammad hairi mursalim, etp-...@googlegroups.com
or paint

330.gif

muhammad hairi mursalim

unread,
Jun 5, 2013, 10:31:19 AM6/5/13
to Faisal Roslee, Norhanisah Zubir, etp-...@googlegroups.com
Hardware/tools, software updated !
330.gif
Hardware,Tools and Software(UPDATED).docx

vincent wong

unread,
Jun 5, 2013, 10:41:18 AM6/5/13
to muhammad hairi mursalim, Faisal Roslee, Norhanisah Zubir, etp-...@googlegroups.com
good job hanisah and hairi, both your part, i've compiled.. 

btw, faisal.. do u use CATIA?

others, please hand in before 12am pls.. for compilation
330.gif

vincent wong

unread,
Jun 5, 2013, 11:30:25 AM6/5/13
to muhammad hairi mursalim, Faisal Roslee, Norhanisah Zubir, etp-...@googlegroups.com
this is the compiled version so far, can take as reference....

pls notify me if there's any errors

the title with yellow highlight means haven received yet..
330.gif
ETP42 Proposal [First draft].docx

Faisal Roslee

unread,
Jun 5, 2013, 11:53:40 AM6/5/13
to vincent wong, muhammad hairi mursalim, Norhanisah Zubir, etp-...@googlegroups.com
I'm trying to use Solidwork....I'm trying hard for this since I've used it 3 to 4 years back.
I will be late.
330.gif

vincent wong

unread,
Jun 5, 2013, 11:58:20 AM6/5/13
to Faisal Roslee, muhammad hairi mursalim, Norhanisah Zubir, etp-...@googlegroups.com
faisal, just a simple sketch should be ok.. no need too nice at the moment.. 
330.gif

muhammad hairi mursalim

unread,
Jun 5, 2013, 11:59:17 AM6/5/13
to vincent wong, Faisal Roslee, Norhanisah Zubir, etp-...@googlegroups.com
yaa. agree with vincent. 
330.gif

VINOTH RAJ KUNASEGARAN

unread,
Jun 5, 2013, 12:21:58 PM6/5/13
to muhammad hairi mursalim, vincent wong, Faisal Roslee, Norhanisah Zubir, etp-...@googlegroups.com
i tried my best to come wit this things......if ter is anyting means do let me know guys......tq
330.gif
my part proposal objectives and literature view.docx

vincent wong

unread,
Jun 5, 2013, 12:45:19 PM6/5/13
to VINOTH RAJ KUNASEGARAN, muhammad hairi mursalim, Faisal Roslee, Norhanisah Zubir, etp-...@googlegroups.com
vinoth, can u paraphrase and summarize your  literature review to ard 1 page?
330.gif

VINOTH RAJ KUNASEGARAN

unread,
Jun 5, 2013, 1:13:14 PM6/5/13
to vincent wong, muhammad hairi mursalim, Faisal Roslee, Norhanisah Zubir, etp-...@googlegroups.com
here you are vincent.....this is modified 1.........

330.gif
my part proposal objectives and literature view.docx

Faisal Roslee

unread,
Jun 5, 2013, 1:52:54 PM6/5/13
to VINOTH RAJ KUNASEGARAN, vincent wong, muhammad hairi mursalim, Norhanisah Zubir, etp-...@googlegroups.com
Guys, ni sama macam projek kita lah....
ETP yang lepas...
Macam mana ni?
330.gif
proposal group #52(iron).docx

vincent wong

unread,
Jun 5, 2013, 2:17:34 PM6/5/13
to Faisal Roslee, VINOTH RAJ KUNASEGARAN, muhammad hairi mursalim, Norhanisah Zubir, etp-...@googlegroups.com
they used touch sensors, but we are using light sensors..
anyway, we are doing set, which include iron board and the anti bacterial chemical also...

i guess it's too late if we change title, cause the proposal is already half way done..
byk project pon repeat past year, lagi pon co Sv kita x bagi title pon..
dia yg suruh kita finalize sendiri..
330.gif

Faisal Roslee

unread,
Jun 5, 2013, 2:34:25 PM6/5/13
to vincent wong, VINOTH RAJ KUNASEGARAN, muhammad hairi mursalim, Norhanisah Zubir, etp-...@googlegroups.com
okok
330.gif

vincent wong

unread,
Jun 5, 2013, 3:38:24 PM6/5/13
to Faisal Roslee, VINOTH RAJ KUNASEGARAN, muhammad hairi mursalim, Norhanisah Zubir, etp-...@googlegroups.com
this is the proposal, pls check...
330.gif
ETP42 Proposal.docx

Faisal Roslee

unread,
Jun 5, 2013, 3:45:53 PM6/5/13
to vincent wong, VINOTH RAJ KUNASEGARAN, muhammad hairi mursalim, Norhanisah Zubir, etp-...@googlegroups.com
wong, u buat bahagian i ker?

330.gif

Faisal Roslee

unread,
Jun 5, 2013, 5:50:11 PM6/5/13
to vincent wong, VINOTH RAJ KUNASEGARAN, muhammad hairi mursalim, Norhanisah Zubir, etp-...@googlegroups.com
This is the schematic diagram.hope u still can attached together with our proposal.  :)

Thank you.
330.gif
Schematic Diagram.docx

vincent wong

unread,
Jun 5, 2013, 9:36:07 PM6/5/13
to Faisal Roslee, VINOTH RAJ KUNASEGARAN, muhammad hairi mursalim, Norhanisah Zubir, etp-...@googlegroups.com
330.gif
[latest] ETP42 Proposal.docx
Reply all
Reply to author
Forward
0 new messages