Fibre Channel Configuration
584 views
Skip to first unread message
jayson....@gmail.com
Sep 10, 2020, 1:34:28 PM9/10/20
to esos-users
I have a ESOS system configured for ISCSI. I now wish to setup a Fibre target. I have a QLogic 2100 card installed. I have ESOS installed directly on a hard drive (it does not boot from a thumb drive).
Can somebody point me to step by step instructions of how to configure the FC target?
Thanks.
Marc Smith
Sep 10, 2020, 2:35:21 PM9/10/20
to esos-...@googlegroups.com
I doubt there are any step-by-step instructions... if you boot ESOS
with this new HBA installed, assuming all works, when SCST starts you
should see a target interface under
/sys/kernel/scst_tgt/targets/qla.../...
If so, then when using the TUI, you should see a new target interface
using the WWPN value(s) of the FC HBA. Add a security group for all of
those targets, then map your SCST device as a LUN in each of those
groups. That should be it.
--Marc
> --
> You received this message because you are subscribed to the Google Groups "esos-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to esos-users+...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/esos-users/4be0812b-d59a-4497-a14e-993b5a63901cn%40googlegroups.com.
with this new HBA installed, assuming all works, when SCST starts you
should see a target interface under
/sys/kernel/scst_tgt/targets/qla.../...
If so, then when using the TUI, you should see a new target interface
using the WWPN value(s) of the FC HBA. Add a security group for all of
those targets, then map your SCST device as a LUN in each of those
groups. That should be it.
--Marc
> You received this message because you are subscribed to the Google Groups "esos-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to esos-users+...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/esos-users/4be0812b-d59a-4497-a14e-993b5a63901cn%40googlegroups.com.
jayson....@gmail.com
Oct 14, 2020, 7:19:44 PM10/14/20
to esos-users
Marc,
I know this is a delayed response but...
What do you mean by "...you should see a new target interface using the WWPN value(s) of the FC HBA."?
I see the directory under the targets directory. I do not see any other Target in the GUI, other than the iscsi I setup for testing before I received the fibre card.
Jayson
jayson....@gmail.com
Oct 14, 2020, 7:55:28 PM10/14/20
to esos-users
Marc,
I guess I need to back up and ask a more basic question: I have a piece of hardware that is supposed to store block data over a FC. To test that I had ESOS configured correctly, I created an ISCSI interface and wrote to ESOS over Ethernet.
Do I need to create a new Target for the FC now that I have the card and have it installed in the computer?
On Thursday, September 10, 2020 at 2:35:21 PM UTC-4 Marc Smith wrote:
Marc Smith
Oct 27, 2020, 11:16:30 PM10/27/20
to esos-...@googlegroups.com
Hi Jayson,
Perhaps your new HBA(s) are not suitable for the QLogic target driver
that you are using? The output of 'dmesg' from a fresh boot might shed
some light on what's wrong.
--Marc
> To view this discussion on the web visit https://groups.google.com/d/msgid/esos-users/8b861256-a42b-4b16-8158-43d8f2e42e0fn%40googlegroups.com.
Perhaps your new HBA(s) are not suitable for the QLogic target driver
that you are using? The output of 'dmesg' from a fresh boot might shed
some light on what's wrong.
--Marc
jayson....@gmail.com
Nov 11, 2020, 1:53:42 PM11/11/20
to esos-users
[ 0.000000] Linux version 4.14.91-esos.prod (buil...@chicago.parodyne.com) (gcc version 7.4.0 (GCC)) #1 SMP Sat Mar 16 07:33:11 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=/PRIMARY-bzImage-esos.prod slot=PRIMARY crashkernel=0M-2G:128M,2G-6G:256M,6G-8G:512M,8G-:768M consoleblank=600 console=tty0 raid=noautodetect noiswmd nodmraid
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf58ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf590000-0x00000000cf5dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf5e0000-0x00000000cf5e2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf5e3000-0x00000000cf5effff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cf5f0000-0x00000000cf5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: OEM OEM/Bearlake, BIOS 6.00 PG 02/01/2010
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CAFFF write-protect
[ 0.000000] CB000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 100000000 mask FE0000000 write-back
[ 0.000000] 1 base 120000000 mask FF0000000 write-back
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 080000000 mask FC0000000 write-back
[ 0.000000] 4 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 5 base 0CF600000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xcf600000-0xcf6fffff] usable ==> reserved
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcf590 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f3740-0x000f374f] mapped at [ffffffffff200740]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff888000099000] 99000 size 24576
[ 0.000000] BRK [0x02f2c000, 0x02f2cfff] PGTABLE
[ 0.000000] BRK [0x02f2d000, 0x02f2dfff] PGTABLE
[ 0.000000] BRK [0x02f2e000, 0x02f2efff] PGTABLE
[ 0.000000] BRK [0x02f2f000, 0x02f2ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35241000-0x36917fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7A40 000014 (v00 IntelR)
[ 0.000000] ACPI: RSDT 0x00000000CF5E3000 000034 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x00000000CF5E3080 000074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Address but zero Length: 0x0000000000000450/0x0 (20170728/tbfadt-658)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20170728/tbfadt-708)
[ 0.000000] ACPI: DSDT 0x00000000CF5E3100 0051D0 (v01 INTELR AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x00000000CF5E0000 000040
[ 0.000000] ACPI: MCFG 0x00000000CF5E83C0 00003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 0x00000000CF5E8300 000084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000CF5E8A60 000590 (v01 PmRef CpuPm 00003000 INTL 20050930)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x12fff8000-0x12fffbfff]
[ 0.000000] Reserving 256MB of memory at 592MB for crashkernel (System RAM: 4085MB)
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cf58ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
[ 0.000000] On node 0 totalpages: 1045806
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13207 pages used for memmap
[ 0.000000] DMA32 zone: 845200 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000cf800000-0x00000000cfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf590000-0xcf5dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf5e0000-0xcf5e2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf5e3000-0xcf5effff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf5f0000-0xcf5fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf600000-0xcf7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x7f/0x43f with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 43 pages/cpu @ffff88812fc00000 s138136 r8192 d29800 u524288
[ 0.000000] pcpu-alloc: s138136 r8192 d29800 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1029442
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/PRIMARY-bzImage-esos.prod slot=PRIMARY crashkernel=0M-2G:128M,2G-6G:256M,6G-8G:512M,8G-:768M consoleblank=600 console=tty0 raid=noautodetect noiswmd nodmraid
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3733368K/4183224K available (16396K kernel code, 1530K rwdata, 4200K rodata, 1288K init, 680K bss, 449856K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 8448, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.001000] tsc: Fast TSC calibration using PIT
[ 0.002000] tsc: Detected 2933.330 MHz processor
[ 0.002000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.66 BogoMIPS (lpj=2933330)
[ 0.002000] pid_max: default: 32768 minimum: 301
[ 0.002000] ACPI: Core revision 20170728
[ 0.005293] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.007307] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008532] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008696] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.008847] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.009235] mce: CPU supports 6 MCE banks
[ 0.009357] CPU0: Thermal monitoring enabled (TM2)
[ 0.009474] process: using mwait in idle threads
[ 0.009594] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.009711] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.009831] Spectre V2 : Mitigation: Full generic retpoline
[ 0.009950] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.010003] Speculative Store Bypass: Vulnerable
[ 0.010271] Freeing SMP alternatives memory: 60K
[ 0.013017] smpboot: Max logical packages: 2
[ 0.013572] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.024000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.024000] ... version: 2
[ 0.024000] ... bit width: 40
[ 0.024000] ... generic registers: 2
[ 0.024000] ... value mask: 000000ffffffffff
[ 0.024000] ... max period: 000000007fffffff
[ 0.024000] ... fixed-purpose events: 3
[ 0.024001] ... event mask: 0000000700000003
[ 0.024170] Hierarchical SRCU implementation.
[ 0.024434] smp: Bringing up secondary CPUs ...
[ 0.024652] x86: Booting SMP configuration:
[ 0.024768] .... node #0, CPUs: #1
[ 0.026032] smp: Brought up 1 node, 2 CPUs
[ 0.026238] smpboot: Total of 2 processors activated (11733.32 BogoMIPS)
[ 0.027212] devtmpfs: initialized
[ 0.027704] PM: Registering ACPI NVS region [mem 0xcf5e0000-0xcf5e2fff] (12288 bytes)
[ 0.028049] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.028241] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.028395] xor: measuring software checksum speed
[ 0.037679] prefetch64-sse: 15588.000 MB/sec
[ 0.047678] generic_sse: 13244.000 MB/sec
[ 0.048002] xor: using function: prefetch64-sse (15588.000 MB/sec)
[ 0.048002] RTC time: 7:33:49, date: 11/11/18
[ 0.048099] NET: Registered protocol family 16
[ 0.048563] cpuidle: using governor ladder
[ 0.049012] cpuidle: using governor menu
[ 0.049108] ACPI: bus type PCI registered
[ 0.049271] dca service started, version 1.12.1
[ 0.049401] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.049589] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.049723] PCI: Using configuration type 1 for base access
[ 0.054046] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.071005] raid6: sse2x1 gen() 4535 MB/s
[ 0.088003] raid6: sse2x1 xor() 4697 MB/s
[ 0.105011] raid6: sse2x2 gen() 4898 MB/s
[ 0.122002] raid6: sse2x2 xor() 5720 MB/s
[ 0.139002] raid6: sse2x4 gen() 8722 MB/s
[ 0.156006] raid6: sse2x4 xor() 6755 MB/s
[ 0.156122] raid6: using algorithm sse2x4 gen() 8722 MB/s
[ 0.156240] raid6: .... xor() 6755 MB/s, rmw enabled
[ 0.156357] raid6: using ssse3x2 recovery algorithm
[ 0.156508] ACPI: Added _OSI(Module Device)
[ 0.156623] ACPI: Added _OSI(Processor Device)
[ 0.156739] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.156855] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.160838] ACPI: Dynamic OEM Table Load:
[ 0.160959] ACPI: SSDT 0xFFFF88812A474800 00026C (v01 PmRef Cpu0Ist 00003000 INTL 20050930)
[ 0.161190] ACPI: Dynamic OEM Table Load:
[ 0.161309] ACPI: SSDT 0xFFFF88812A453400 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20050930)
[ 0.161772] ACPI: Interpreter enabled
[ 0.162017] ACPI: (supports S0 S3 S4 S5)
[ 0.162132] ACPI: Using IOAPIC for interrupt routing
[ 0.162269] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.162644] ACPI: Enabled 12 GPEs in block 00 to 3F
[ 0.167602] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.167726] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.167911] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.168074] PCI host bridge to bus 0000:00
[ 0.168191] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.168312] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.168433] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.168614] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.168796] pci_bus 0000:00: root bus resource [mem 0xcf650000-0xfebfffff window]
[ 0.169003] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.169128] pci 0000:00:00.0: [8086:29b0] type 00 class 0x060000
[ 0.169221] pci 0000:00:02.0: [8086:29b2] type 00 class 0x030000
[ 0.169230] pci 0000:00:02.0: reg 0x10: [mem 0xfde80000-0xfdefffff]
[ 0.169234] pci 0000:00:02.0: reg 0x14: [io 0xff00-0xff07]
[ 0.169238] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.169242] pci 0000:00:02.0: reg 0x1c: [mem 0xfdb00000-0xfdbfffff]
[ 0.169329] pci 0000:00:02.1: [8086:29b3] type 00 class 0x038000
[ 0.169336] pci 0000:00:02.1: reg 0x10: [mem 0xfdf00000-0xfdf7ffff]
[ 0.169456] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.169503] pci 0000:00:1a.0: reg 0x20: [io 0xfe00-0xfe1f]
[ 0.169619] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.169667] pci 0000:00:1a.1: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.169779] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.169826] pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.169944] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.169965] pci 0000:00:1a.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.170057] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.170141] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.170165] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.170249] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.170339] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.170428] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.170520] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.170609] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.170705] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.170753] pci 0000:00:1d.0: reg 0x20: [io 0xfb00-0xfb1f]
[ 0.170865] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.170911] pci 0000:00:1d.1: reg 0x20: [io 0xfa00-0xfa1f]
[ 0.171027] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.171074] pci 0000:00:1d.2: reg 0x20: [io 0xf900-0xf91f]
[ 0.171194] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.171215] pci 0000:00:1d.7: reg 0x10: [mem 0xfdffe000-0xfdffe3ff]
[ 0.171294] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.171373] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.171507] pci 0000:00:1f.0: [8086:2914] type 00 class 0x060100
[ 0.171582] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.171766] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.171888] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[ 0.172003] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.172186] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 04e0 (mask 001f)
[ 0.172368] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e0 (mask 001f)
[ 0.172643] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
[ 0.172663] pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807]
[ 0.172672] pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703]
[ 0.172680] pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607]
[ 0.172689] pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503]
[ 0.172697] pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf40f]
[ 0.172706] pci 0000:00:1f.2: reg 0x24: [io 0xf300-0xf30f]
[ 0.172814] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.172834] pci 0000:00:1f.3: reg 0x10: [mem 0xfdffd000-0xfdffd0ff 64bit]
[ 0.172858] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.173024] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[ 0.173044] pci 0000:00:1f.5: reg 0x10: [io 0xf100-0xf107]
[ 0.173052] pci 0000:00:1f.5: reg 0x14: [io 0xf000-0xf003]
[ 0.173061] pci 0000:00:1f.5: reg 0x18: [io 0xef00-0xef07]
[ 0.173070] pci 0000:00:1f.5: reg 0x1c: [io 0xee00-0xee03]
[ 0.173078] pci 0000:00:1f.5: reg 0x20: [io 0xed00-0xed0f]
[ 0.173088] pci 0000:00:1f.5: reg 0x24: [io 0xec00-0xec0f]
[ 0.173256] pci 0000:01:00.0: [8086:109a] type 00 class 0x020000
[ 0.173301] pci 0000:01:00.0: reg 0x10: [mem 0xfd8e0000-0xfd8fffff]
[ 0.173337] pci 0000:01:00.0: reg 0x18: [io 0xdf00-0xdf1f]
[ 0.173509] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.173580] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.173782] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.173900] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.173904] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.173910] pci 0000:00:1c.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.173977] pci 0000:02:00.0: [8086:109a] type 00 class 0x020000
[ 0.174024] pci 0000:02:00.0: reg 0x10: [mem 0xfdde0000-0xfddfffff]
[ 0.174060] pci 0000:02:00.0: reg 0x18: [io 0xbf00-0xbf1f]
[ 0.174232] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.174304] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.174504] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.174624] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.174628] pci 0000:00:1c.1: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.174634] pci 0000:00:1c.1: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.174675] pci 0000:03:06.0: [1050:0628] type 00 class 0x060100
[ 0.174786] pci 0000:03:0d.0: [1077:2200] type 00 class 0x010000
[ 0.174805] pci 0000:03:0d.0: reg 0x10: [io 0xcc00-0xccff]
[ 0.174814] pci 0000:03:0d.0: reg 0x14: [mem 0xfdaff000-0xfdafffff]
[ 0.174852] pci 0000:03:0d.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.174915] pci 0000:03:0e.0: [8086:107c] type 00 class 0x020000
[ 0.174936] pci 0000:03:0e.0: reg 0x10: [mem 0xfdac0000-0xfdadffff]
[ 0.174944] pci 0000:03:0e.0: reg 0x14: [mem 0xfdaa0000-0xfdabffff]
[ 0.174953] pci 0000:03:0e.0: reg 0x18: [io 0xcf00-0xcf3f]
[ 0.174984] pci 0000:03:0e.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.175019] pci 0000:03:0e.0: PME# supported from D0 D3hot D3cold
[ 0.175067] pci 0000:03:0f.0: [8086:107c] type 00 class 0x020000
[ 0.175088] pci 0000:03:0f.0: reg 0x10: [mem 0xfda80000-0xfda9ffff]
[ 0.175097] pci 0000:03:0f.0: reg 0x14: [mem 0xfda60000-0xfda7ffff]
[ 0.175105] pci 0000:03:0f.0: reg 0x18: [io 0xce00-0xce3f]
[ 0.175136] pci 0000:03:0f.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.175168] pci 0000:03:0f.0: PME# supported from D0 D3hot D3cold
[ 0.175223] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.175346] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.175350] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.175356] pci 0000:00:1e.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.175359] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.175361] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.175362] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.175364] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.175366] pci 0000:00:1e.0: bridge window [mem 0xcf650000-0xfebfffff window] (subtractive decode)
[ 0.175912] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.176050] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.176222] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 0.176394] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.176566] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.176800] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.177016] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.177188] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.177434] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.177434] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.177434] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.177434] vgaarb: loaded
[ 0.178086] SCSI subsystem initialized
[ 0.178208] libata version 3.00 loaded.
[ 0.178208] ACPI: bus type USB registered
[ 0.178208] usbcore: registered new interface driver usbfs
[ 0.178298] usbcore: registered new interface driver hub
[ 0.178424] usbcore: registered new device driver usb
[ 0.178560] pps_core: LinuxPPS API ver. 1 registered
[ 0.178678] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giom...@linux.it>
[ 0.179005] PTP clock support registered
[ 0.179135] EDAC MC: Ver: 3.0.0
[ 0.179213] PCI: Using ACPI for IRQ routing
[ 0.187468] PCI: pci_cache_line_size set to 64 bytes
[ 0.187533] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.187534] e820: reserve RAM buffer [mem 0xcf590000-0xcfffffff]
[ 0.187644] clocksource: Switched to clocksource refined-jiffies
[ 0.200489] VFS: Disk quotas dquot_6.6.0
[ 0.200635] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.200834] pnp: PnP ACPI init
[ 0.201150] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.201270] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.201389] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.201513] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.201547] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.201793] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.201974] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.202241] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.202332] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.202393] system 00:06: [io 0x0400-0x04bf] could not be reserved
[ 0.202518] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.202707] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.202831] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.202918] system 00:08: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.203000] system 00:08: [mem 0xcf600000-0xcf6fffff] could not be reserved
[ 0.203122] system 00:08: [mem 0xcf5e0000-0xcf5fffff] could not be reserved
[ 0.203244] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.203366] system 00:08: [mem 0x00100000-0xcf5dffff] could not be reserved
[ 0.203487] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.203609] system 00:08: [mem 0xfed13000-0xfed1ffff] has been reserved
[ 0.203730] system 00:08: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.203851] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.203999] system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.204121] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.204241] system 00:08: [mem 0x000e0000-0x000effff] has been reserved
[ 0.204365] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.204371] pnp: PnP ACPI: found 9 devices
[ 0.210450] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.210644] clocksource: Switched to clocksource acpi_pm
[ 0.210644] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.210644] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.210644] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.210644] pci 0000:00:1c.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.210743] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.210861] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.210983] pci 0000:00:1c.1: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.211114] pci 0000:00:1c.1: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.211304] pci 0000:03:0d.0: BAR 6: assigned [mem 0xfda00000-0xfda1ffff pref]
[ 0.211485] pci 0000:03:0e.0: BAR 6: assigned [mem 0xfda20000-0xfda3ffff pref]
[ 0.211667] pci 0000:03:0f.0: BAR 6: assigned [mem 0xfda40000-0xfda5ffff pref]
[ 0.211848] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.211966] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.212098] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.212220] pci 0000:00:1e.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.212407] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.212409] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.212411] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.212412] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.212414] pci_bus 0000:00: resource 8 [mem 0xcf650000-0xfebfffff window]
[ 0.212416] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.212418] pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 0.212419] pci_bus 0000:01: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.212421] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.212422] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.212424] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.212426] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.212427] pci_bus 0000:03: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.212429] pci_bus 0000:03: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.212430] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.212432] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.212434] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.212435] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.212437] pci_bus 0000:03: resource 8 [mem 0xcf650000-0xfebfffff window]
[ 0.212500] NET: Registered protocol family 2
[ 0.212776] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.213094] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.213411] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.213581] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.213725] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.213904] NET: Registered protocol family 1
[ 0.214153] RPC: Registered named UNIX socket transport module.
[ 0.214272] RPC: Registered udp transport module.
[ 0.214388] RPC: Registered tcp transport module.
[ 0.214504] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.214634] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.215871] PCI: CLS 64 bytes, default 64
[ 0.215916] Trying to unpack rootfs image as initramfs...
[ 0.485912] Freeing initrd memory: 23388K
[ 0.486070] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.486190] software IO TLB: mapped [mem 0xcb590000-0xcf590000] (64MB)
[ 0.486861] Scanning for low memory corruption every 60 seconds
[ 0.487323] audit: initializing netlink subsys (disabled)
[ 0.487477] audit: type=2000 audit(1541921628.486:1): state=initialized audit_enabled=0 res=1
[ 0.487606] workingset: timestamp_bits=56 max_order=20 bucket_order=0
[ 0.489694] DLM installed
[ 0.490206] NFS: Registering the id_resolver key type
[ 0.490330] Key type id_resolver registered
[ 0.490445] Key type id_legacy registered
[ 0.490563] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.490685] Installing knfsd (copyright (C) 1996 ok...@monad.swb.de).
[ 0.490997] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.491216] fuse init (API version 7.26)
[ 0.491421] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 0.492988] async_tx: api initialized (async)
[ 0.493134] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.493316] io scheduler noop registered
[ 0.493431] io scheduler deadline registered
[ 0.493572] io scheduler cfq registered (default)
[ 0.493689] io scheduler mq-deadline registered
[ 0.493805] io scheduler kyber registered
[ 0.493945] io scheduler bfq registered
[ 0.494604] ipmi message handler version 39.2
[ 0.494722] ipmi device interface
[ 0.494849] IPMI System Interface driver.
[ 0.494987] ipmi_si: Unable to find any System Interface(s)
[ 0.495129] IPMI Watchdog: driver initialized
[ 0.495245] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 0.495523] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.495717] ACPI: Power Button [PWRB]
[ 0.495881] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.496101] ACPI: Power Button [PWRF]
[ 0.496646] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.496925] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.497074] ACPI: Thermal Zone [THRM] (40 C)
[ 0.497215] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 0.497430] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.518215] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.539072] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.541367] Non-volatile memory driver v1.3
[ 0.541513] Linux agpgart interface v0.103
[ 0.541731] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 0.543840] brd: module loaded
[ 0.545585] loop: module loaded
[ 0.548218] drbd: initialized. Version: 8.4.10 (api:1/proto:86-101)
[ 0.548341] drbd: built-in
[ 0.548454] drbd: registered as block device major 147
[ 0.548696] rbd: loaded
[ 0.548809] mtip32xx Version 1.3.1
[ 0.549419] null: module loaded
[ 0.549557] Loading iSCSI transport class v2.0-870.
[ 0.549782] alua: device handler registered
[ 0.549987] fnic: Cisco FCoE HBA Driver, ver 1.6.0.34
[ 0.550164] fnic: Successfully Initialized Trace Buffer
[ 0.550374] fnic: Successfully Initialized FC_CTLR Trace Buffer
[ 0.550626] bnx2fc: QLogic FCoE Driver bnx2fc v2.11.8 (October 15, 2015)
[ 0.550871] iscsi: registered transport (tcp)
[ 0.551015] Adaptec aacraid driver 1.2.1[50834]-custom
[ 0.551203] Microsemi PQI Driver (v1.1.2-125)
[ 0.551336] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 0.551548] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 0.551682] megasas: 07.702.06.00-rc1
[ 0.551816] mpt3sas version 15.100.00.00 loaded
[ 0.552025] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 0.552217] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 0.552410] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015)
[ 0.552595] Chelsio T3 iSCSI Driver cxgb3i v2.0.1-ko (Apr. 2015)
[ 0.552724] iscsi: registered transport (cxgb3i)
[ 0.552840] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014)
[ 0.552970] iscsi: registered transport (bnx2i)
[ 0.553204] esas2r: driver will not be loaded because no ATTO esas2r devices were found
[ 0.553404] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.553534] hv_vmbus: registering driver hv_storvsc
[ 0.553652] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[ 0.553991] ata_piix 0000:00:1f.2: version 2.13
[ 0.554129] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.554928] scsi host0: ata_piix
[ 0.555178] scsi host1: ata_piix
[ 0.555342] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[ 0.555467] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[ 0.555664] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.556299] scsi host2: ata_piix
[ 0.556529] scsi host3: ata_piix
[ 0.556691] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
[ 0.556814] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
[ 0.557090] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[ 0.557284] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10)
[ 0.557615] enic: Cisco VIC Ethernet NIC Driver, ver 2.3.0.42
[ 0.557825] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.557945] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.558088] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.558210] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.872231] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.883285] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.987124] e1000 0000:03:0e.0 eth0: (PCI:33MHz:32-bit) 68:05:ca:b4:0c:8f
[ 0.987248] e1000 0000:03:0e.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.328090] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.328233] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.328501] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.328636] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.328765] ata2.01: link offline, clearing class 3 to NONE
[ 1.330810] ata1.00: supports DRM functions and may not be fully accessible
[ 1.330946] ata1.00: ATA-11: Samsung SSD 860 EVO 2TB, RVT03B6Q, max UDMA/133
[ 1.331086] ata1.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.335628] ata1.00: supports DRM functions and may not be fully accessible
[ 1.337554] ata1.00: configured for UDMA/133
[ 1.348181] ata2.00: ATAPI: Slimtype DVD A DS8ACSH, LP5M, max UDMA/133
[ 1.386177] ata2.00: configured for UDMA/133
[ 1.408098] e1000 0000:03:0f.0 eth1: (PCI:33MHz:32-bit) 68:05:ca:a1:01:f9
[ 1.408221] e1000 0000:03:0f.0 eth1: Intel(R) PRO/1000 Network Connection
[ 1.408357] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.408475] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.408738] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.504030] tsc: Refined TSC clocksource calibration: 2933.333 MHz
[ 1.504174] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a4843aceae, max_idle_ns: 440795305103 ns
[ 1.514498] e1000e 0000:01:00.0 eth2: (PCI Express:2.5GT/s:Width x1) 00:03:1d:10:3a:1b
[ 1.514681] e1000e 0000:01:00.0 eth2: Intel(R) PRO/1000 Network Connection
[ 1.514873] e1000e 0000:01:00.0 eth2: MAC: 2, PHY: 2, PBA No: FFFFFF-0FF
[ 1.515139] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.620496] e1000e 0000:02:00.0 eth3: (PCI Express:2.5GT/s:Width x1) 00:03:1d:10:3a:1c
[ 1.620680] e1000e 0000:02:00.0 eth3: Intel(R) PRO/1000 Network Connection
[ 1.620873] e1000e 0000:02:00.0 eth3: MAC: 2, PHY: 2, PBA No: FFFFFF-0FF
[ 1.621022] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 1.621143] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.621277] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 1.621458] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.621589] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
[ 1.621769] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 1.621946] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 4.1.0-k
[ 1.622139] ixgbevf: Copyright (c) 2009 - 2015 Intel Corporation.
[ 1.622312] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 2.1.14-k
[ 1.622495] i40e: Copyright (c) 2013 - 2014 Intel Corporation.
[ 1.622670] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 1.622791] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 1.622921] i40evf: Intel(R) 40-10 Gigabit Virtual Function Network Driver - version 3.0.0-k
[ 1.623113] Copyright (c) 2013 - 2015 Intel Corporation.
[ 1.623288] sky2: driver version 1.30
[ 1.623477] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.66
[ 1.623626] QLogic/NetXen Network Driver v4.0.82
[ 1.623792] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[ 1.623924] hv_vmbus: registering driver hv_netvsc
[ 1.624049] Fusion MPT base driver 3.04.20
[ 1.624164] Copyright (c) 1999-2008 LSI Corporation
[ 1.624284] Fusion MPT SPI Host driver 3.04.20
[ 1.624414] Fusion MPT FC Host driver 3.04.20
[ 1.624547] Fusion MPT SAS Host driver 3.04.20
[ 1.624678] Fusion MPT misc device (ioctl) driver 3.04.20
[ 1.624836] mptctl: Registered with Fusion MPT base driver
[ 1.624954] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 1.625080] Fusion MPT LAN driver 3.04.20
[ 1.625449] aoe: AoE v85 initialised.
[ 1.625610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.625729] ehci-pci: EHCI PCI platform driver
[ 1.625941] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.626108] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.626298] ehci-pci 0000:00:1a.7: debug port 1
[ 1.630325] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.630338] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 1.637018] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.637250] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.637372] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.637554] usb usb1: Product: EHCI Host Controller
[ 1.637671] usb usb1: Manufacturer: Linux 4.14.91-esos.prod ehci_hcd
[ 1.637790] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.638027] hub 1-0:1.0: USB hub found
[ 1.638153] hub 1-0:1.0: 6 ports detected
[ 1.638543] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.638698] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.638888] ehci-pci 0000:00:1d.7: debug port 1
[ 1.642929] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.642939] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 1.650023] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.650255] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.650376] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.650557] usb usb2: Product: EHCI Host Controller
[ 1.650675] usb usb2: Manufacturer: Linux 4.14.91-esos.prod ehci_hcd
[ 1.650795] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.651023] hub 2-0:1.0: USB hub found
[ 1.651149] hub 2-0:1.0: 6 ports detected
[ 1.651451] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.651573] ohci-pci: OHCI PCI platform driver
[ 1.651699] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.651888] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.652067] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.652277] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
[ 1.652478] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.652599] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.652779] usb usb3: Product: UHCI Host Controller
[ 1.652896] usb usb3: Manufacturer: Linux 4.14.91-esos.prod uhci_hcd
[ 1.653026] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.653240] hub 3-0:1.0: USB hub found
[ 1.653366] hub 3-0:1.0: 2 ports detected
[ 1.653660] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.653813] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.654031] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
[ 1.654235] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.654356] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.654536] usb usb4: Product: UHCI Host Controller
[ 1.656396] usb usb4: Manufacturer: Linux 4.14.91-esos.prod uhci_hcd
[ 1.656516] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.656726] hub 4-0:1.0: USB hub found
[ 1.656852] hub 4-0:1.0: 2 ports detected
[ 1.657148] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.657301] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.657503] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
[ 1.657701] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.657822] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.658014] usb usb5: Product: UHCI Host Controller
[ 1.658134] usb usb5: Manufacturer: Linux 4.14.91-esos.prod uhci_hcd
[ 1.658255] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.658464] hub 5-0:1.0: USB hub found
[ 1.658589] hub 5-0:1.0: 2 ports detected
[ 1.658873] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.659043] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.659245] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
[ 1.659439] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.659560] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.659741] usb usb6: Product: UHCI Host Controller
[ 1.659859] usb usb6: Manufacturer: Linux 4.14.91-esos.prod uhci_hcd
[ 1.659979] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.660207] hub 6-0:1.0: USB hub found
[ 1.660332] hub 6-0:1.0: 2 ports detected
[ 1.660614] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.660768] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.660969] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
[ 1.661187] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.661308] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.661489] usb usb7: Product: UHCI Host Controller
[ 1.661607] usb usb7: Manufacturer: Linux 4.14.91-esos.prod uhci_hcd
[ 1.661727] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.661945] hub 7-0:1.0: USB hub found
[ 1.662083] hub 7-0:1.0: 2 ports detected
[ 1.662363] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.662524] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.662724] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
[ 1.662916] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.663055] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.663237] usb usb8: Product: UHCI Host Controller
[ 1.663354] usb usb8: Manufacturer: Linux 4.14.91-esos.prod uhci_hcd
[ 1.663475] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.663687] hub 8-0:1.0: USB hub found
[ 1.663813] hub 8-0:1.0: 2 ports detected
[ 1.664107] usbcore: registered new interface driver usb-storage
[ 1.664262] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.664382] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.665295] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.665422] hv_vmbus: registering driver hyperv_keyboard
[ 1.665589] mousedev: PS/2 mouse device common for all mice
[ 1.665816] rtc_cmos 00:01: RTC can wake from S4
[ 1.666077] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.666218] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram
[ 1.666445] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.667172] IR NEC protocol handler initialized
[ 1.667289] IR RC5(x/sz) protocol handler initialized
[ 1.667406] IR RC6 protocol handler initialized
[ 1.667522] IR JVC protocol handler initialized
[ 1.667638] IR Sony protocol handler initialized
[ 1.667754] IR SANYO protocol handler initialized
[ 1.667870] IR Sharp protocol handler initialized
[ 1.667986] IR MCE Keyboard/mouse protocol handler initialized
[ 1.668121] IR XMP protocol handler initialized
[ 1.668311] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[ 1.668555] md-cluster: EXPERIMENTAL. Use with caution
[ 1.668673] Registering Cluster MD functions
[ 1.668866] device-mapper: uevent: version 1.0.3
[ 1.669059] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-d...@redhat.com
[ 1.669333] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 1.669454] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 1.669574] device-mapper: multipath service-time: version 0.3.0 loaded
[ 1.669704] device-mapper: raid: Loading target version 1.13.0
[ 1.669918] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 1.670132] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.670352] usbcore: registered new interface driver usbhid
[ 1.670469] usbhid: USB HID core driver
[ 1.670591] hv_utils: Registering HyperV Utility Driver
[ 1.670710] hv_vmbus: registering driver hv_util
[ 1.670826] hv_vmbus: registering driver hv_balloon
[ 1.670950] AMD(R) PCI-E Non-Transparent Bridge Driver 1.0
[ 1.671100] IDT PCI-E Non-Transparent Bridge Driver 2.0
[ 1.671232] Intel(R) PCI-E Non-Transparent Bridge Driver 2.0
[ 1.671364] Software Queue-Pair Transport over NTB, version 4
[ 1.671513] u32 classifier
[ 1.671625] Actions configured
[ 1.671743] Netfilter messages via NETLINK v0.30.
[ 1.671937] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.672098] ctnetlink v0.93: registering with nfnetlink.
[ 1.672338] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.672555] Initializing XFRM netlink socket
[ 1.672793] NET: Registered protocol family 10
[ 1.673271] Segment Routing with IPv6
[ 1.673405] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.673627] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.673883] NET: Registered protocol family 17
[ 1.674101] RPC: Registered rdma transport module.
[ 1.674218] RPC: Registered rdma backchannel transport module.
[ 1.674337] 8021q: 802.1Q VLAN Support v1.8
[ 1.674464] sctp: Hash tables configured (bind 256/256)
[ 1.674665] Key type dns_resolver registered
[ 1.674783] Key type ceph registered
[ 1.674954] libceph: loaded (mon/osd proto 15/24)
[ 1.675409] microcode: sig=0x1067a, pf=0x1, revision=0xa04
[ 1.675573] microcode: Microcode Update Driver: v2.2.
[ 1.675584] sched_clock: Marking stable (1675568804, 0)->(1781945393, -106376589)
[ 1.675973] registered taskstats version 1
[ 1.676269] Btrfs loaded, crc32c=crc32c-generic
[ 1.676691] Magic number: 10:626:571
[ 1.676909] console [netcon0] enabled
[ 1.677036] netconsole: network logging started
[ 2.364018] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[ 2.512077] clocksource: Switched to clocksource tsc
[ 2.973043] usb 6-1: New USB device found, idVendor=413c, idProduct=2101
[ 2.973174] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.973305] usb 6-1: Product: Dell Smart Card Reader Keyboard
[ 2.973425] usb 6-1: Manufacturer: Dell
[ 2.980414] input: Dell Dell Smart Card Reader Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/0003:413C:2101.0001/input/input3
[ 3.032187] hid-generic 0003:413C:2101.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on usb-0000:00:1d.0-1/input0
[ 3.616031] floppy0: no floppy controllers found
[ 3.616171] work still pending
[ 3.616429] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 3B6Q PQ: 0 ANSI: 5
[ 3.616714] ata1.00: Enabling discard_zeroes_data
[ 3.616751] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.616856] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.617148] sd 0:0:0:0: [sda] Write Protect is off
[ 3.617266] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.617274] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.617627] ata1.00: Enabling discard_zeroes_data
[ 3.620373] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 3.620791] ata1.00: Enabling discard_zeroes_data
[ 3.620947] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.623802] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8ACSH LP5M PQ: 0 ANSI: 5
[ 3.668010] usb 6-2: new low-speed USB device number 3 using uhci_hcd
[ 3.675654] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 3.675852] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.676096] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.676187] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.677281] Freeing unused kernel memory: 1288K
[ 3.682015] Write protecting the kernel read-only data: 24576k
[ 3.683023] Freeing unused kernel memory: 2004K
[ 3.687759] Freeing unused kernel memory: 1944K
[ 3.687885] rodata_test: all tests were successful
[ 4.467045] usb 6-2: New USB device found, idVendor=03f0, idProduct=134a
[ 4.467048] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.467051] usb 6-2: Product: HP USB Optical Mouse
[ 4.467054] usb 6-2: Manufacturer: PixArt
[ 4.482358] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:03F0:134A.0002/input/input4
[ 4.482433] hid-generic 0003:03F0:134A.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 8.790734] random: fast init done
[ 8.824627] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 58.065056] random: perl: uninitialized urandom read (4 bytes read)
[ 58.287295] random: perl: uninitialized urandom read (4 bytes read)
[ 58.464925] udevd[703]: starting version 3.2.5
[ 58.464993] random: udevd: uninitialized urandom read (16 bytes read)
[ 58.465811] udevd[703]: specified group 'render' unknown
[ 58.465973] udevd[703]: specified group 'kvm' unknown
[ 58.467720] udevd[704]: starting eudev-3.2.5
[ 58.520485] e1000e 0000:01:00.0 enp1s0: renamed from eth2
[ 58.524776] e1000e 0000:02:00.0 enp2s0: renamed from eth3
[ 58.526328] e1000 0000:03:0f.0 enp3s15: renamed from eth1
[ 58.530179] e1000 0000:03:0e.0 enp3s14: renamed from eth0
[ 71.876510] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1
[ 71.900566] cls: loading out-of-tree module taints kernel.
[ 71.900957] Athena Host Driver Version 0.1.4
[ 71.901027] cls: loaded.
[ 71.927830] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 72.112438] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 72.112439] 8021q: adding VLAN 0 to HW filter on device enp1s0
[ 72.296430] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 72.296431] 8021q: adding VLAN 0 to HW filter on device enp2s0
[ 72.298001] IPv6: ADDRCONF(NETDEV_UP): enp3s14: link is not ready
[ 72.298007] 8021q: adding VLAN 0 to HW filter on device enp3s14
[ 72.299358] IPv6: ADDRCONF(NETDEV_UP): enp3s15: link is not ready
[ 72.299360] 8021q: adding VLAN 0 to HW filter on device enp3s15
[ 72.321222] e1000: enp3s14 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 72.343186] e1000: enp3s15 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 72.343321] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s14: link becomes ready
[ 72.343375] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s15: link becomes ready
[ 74.433993] e1000e: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 74.434140] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 74.655991] e1000e: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 74.656131] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 82.535242] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.01-k.
[ 82.535410] qla2xxx [0000:03:0d.0]-001d: : Found an ISP2200 irq 19 iobase 0xffffc90000689000.
[ 90.636124] scsi host4: qla2xxx
[ 90.644045] qla2xxx [0000:03:0d.0]-00fb:4: QLogic QLA22xx - .
[ 90.644050] qla2xxx [0000:03:0d.0]-00fc:4: ISP2200: PCI (33 MHz) @ 0000:03:0d.0 hdma+ host#=4 fw=2.02.08 TP.
[ 90.644052] qla2xxx [0000:03:0d.0]-e070:4: This adapter does not support target mode.
[ 95.659199] SPL: Loaded module v0.7.4-1
[ 95.666289] icp: module license 'CDDL' taints kernel.
[ 95.666291] Disabling lock debugging due to kernel taint
[ 97.329843] ZFS: Loaded module v0.7.4-1, ZFS pool version 5000, ZFS filesystem version 5
[ 97.859583] XFS (dm-0): Mounting V5 Filesystem
[ 97.891858] XFS (dm-0): Ending clean mount
[ 97.919727] scst: Attached to scsi0, channel 0, id 0, lun 0, type 0
[ 97.919746] scst: Attached to scsi1, channel 0, id 0, lun 0, type 5
[ 97.919768] scst: User interface thread started
[ 97.920358] scst: Init thread started
[ 97.920375] scst: Task management thread started
[ 97.920390] scst: Management thread started
[ 97.920396] scst: Target template copy_manager registered successfully
[ 97.920416] scst: Target copy_manager_tgt for template copy_manager registered successfully
[ 97.920419] scst: Using security group "copy_manager_tgt" for initiator "copy_manager_sess" (target copy_manager_tgt)
[ 97.920457] scst: SCST version 3.3.0 loaded successfully (global max mem for commands ignored, per device 367MB)
[ 97.926422] iscsi-scst: iSCSI SCST Target - version 3.3.0
[ 97.926424] iscsi-scst: Registered iSCSI transport: iSCSI-TCP
[ 97.926604] scst: Target template iscsi registered successfully
[ 97.926671] iscsi-scst: Read thread for pool ffff888124a4c600 started
[ 97.926690] iscsi-scst: Read thread for pool ffff888124a4c600 started
[ 97.926707] iscsi-scst: Write thread for pool ffff888124a4c600 started
[ 97.926866] iscsi-scst: Write thread for pool ffff888124a4c600 started
[ 97.931295] iscsi-scst: Registered iSCSI transport: iSER
[ 97.940609] scst: Target template ib_srpt registered successfully
[ 97.942703] scst: Device handler "dev_disk" for type 0 registered successfully
[ 97.942707] scst: Device handler "dev_disk_perf" for type 0 registered successfully
[ 97.945871] scst: Virtual device handler vdisk_fileio for type 0 registered successfully
[ 97.945875] scst: Virtual device handler vdisk_blockio for type 0 registered successfully
[ 97.945878] scst: Virtual device handler vdisk_nullio for type 0 registered successfully
[ 97.945880] scst: Virtual device handler vcdrom for type 5 registered successfully
[ 97.947659] scst: Device handler "dev_tape" for type 1 registered successfully
[ 97.947663] scst: Device handler "dev_tape_perf" for type 1 registered successfully
[ 97.949518] scst: Device handler "dev_changer" for type 8 registered successfully
[ 97.952621] scst: Target template fcst registered successfully
[ 97.954722] sqatgt: Initializing SCST Cavium adapter target driver interface - driver version=10.00.00.01-k, SCST version=3.3.0, Cavium version=10.00.00.01-k
[ 97.954729] scst: Target template qla2x00t registered successfully
[ 97.957155] iscsi-scst: Created iser portal cm_id:ffff88812f63d000
[ 97.957161] iscsi-scst: iser portal cm_id:ffff88812f63d000 listens on: 0.0.0.0:3260
[ 97.957164] iscsi-scst: Created iser portal cm_id:ffff88812f63e800
[ 97.957166] iscsi-scst: iser portal cm_id:ffff88812f63e800 listens on: 0000:0000:0000:0000:0000:0000:0000:0000 3260
[ 98.065450] dev_vdisk: Registering virtual vdisk_fileio device ssr_scsi1 (ROTATIONAL)
[ 98.065516] dev_vdisk: Attached SCSI target virtual disk ssr_scsi1 (file="/mnt/vdisks/gh_ssr/ssr_disk", fs=30720MB, bs=512, nblocks=62914560, cyln=30720)
[ 98.066257] scst: Added device ssr_scsi1 to group copy_manager_tgt (LUN 0, flags 0x4) to target copy_manager_tgt
[ 98.066274] scst: Attached to virtual device ssr_scsi1 (id 1)
[ 98.068331] scst: Target iqn.2020-07.esos.ssr:0a068 for template iscsi registered successfully
[ 98.075711] scst: Added device ssr_scsi1 to group ssr_group1 (LUN 0, flags 0x2) to target iqn.2020-07.esos.ssr:0a068
[ 98.076402] scst: Added name iqn.1991-05.com.microsoft:esos to group ssr_group1 (target iqn.2020-07.esos.ssr:0a068)
[ 125.536059] random: crng init done
[ 125.536064] random: 7 urandom warning(s) missed due to ratelimiting
[root@ssr ~]#
[ 0.000000] Command line: BOOT_IMAGE=/PRIMARY-bzImage-esos.prod slot=PRIMARY crashkernel=0M-2G:128M,2G-6G:256M,6G-8G:512M,8G-:768M consoleblank=600 console=tty0 raid=noautodetect noiswmd nodmraid
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf58ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf590000-0x00000000cf5dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf5e0000-0x00000000cf5e2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf5e3000-0x00000000cf5effff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cf5f0000-0x00000000cf5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: OEM OEM/Bearlake, BIOS 6.00 PG 02/01/2010
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CAFFF write-protect
[ 0.000000] CB000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 100000000 mask FE0000000 write-back
[ 0.000000] 1 base 120000000 mask FF0000000 write-back
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 080000000 mask FC0000000 write-back
[ 0.000000] 4 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 5 base 0CF600000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xcf600000-0xcf6fffff] usable ==> reserved
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcf590 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f3740-0x000f374f] mapped at [ffffffffff200740]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff888000099000] 99000 size 24576
[ 0.000000] BRK [0x02f2c000, 0x02f2cfff] PGTABLE
[ 0.000000] BRK [0x02f2d000, 0x02f2dfff] PGTABLE
[ 0.000000] BRK [0x02f2e000, 0x02f2efff] PGTABLE
[ 0.000000] BRK [0x02f2f000, 0x02f2ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35241000-0x36917fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7A40 000014 (v00 IntelR)
[ 0.000000] ACPI: RSDT 0x00000000CF5E3000 000034 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x00000000CF5E3080 000074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Address but zero Length: 0x0000000000000450/0x0 (20170728/tbfadt-658)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20170728/tbfadt-708)
[ 0.000000] ACPI: DSDT 0x00000000CF5E3100 0051D0 (v01 INTELR AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x00000000CF5E0000 000040
[ 0.000000] ACPI: MCFG 0x00000000CF5E83C0 00003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 0x00000000CF5E8300 000084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000CF5E8A60 000590 (v01 PmRef CpuPm 00003000 INTL 20050930)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x12fff8000-0x12fffbfff]
[ 0.000000] Reserving 256MB of memory at 592MB for crashkernel (System RAM: 4085MB)
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cf58ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
[ 0.000000] On node 0 totalpages: 1045806
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13207 pages used for memmap
[ 0.000000] DMA32 zone: 845200 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000cf800000-0x00000000cfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf590000-0xcf5dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf5e0000-0xcf5e2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf5e3000-0xcf5effff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf5f0000-0xcf5fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf600000-0xcf7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x7f/0x43f with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 43 pages/cpu @ffff88812fc00000 s138136 r8192 d29800 u524288
[ 0.000000] pcpu-alloc: s138136 r8192 d29800 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1029442
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/PRIMARY-bzImage-esos.prod slot=PRIMARY crashkernel=0M-2G:128M,2G-6G:256M,6G-8G:512M,8G-:768M consoleblank=600 console=tty0 raid=noautodetect noiswmd nodmraid
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3733368K/4183224K available (16396K kernel code, 1530K rwdata, 4200K rodata, 1288K init, 680K bss, 449856K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 8448, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.001000] tsc: Fast TSC calibration using PIT
[ 0.002000] tsc: Detected 2933.330 MHz processor
[ 0.002000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.66 BogoMIPS (lpj=2933330)
[ 0.002000] pid_max: default: 32768 minimum: 301
[ 0.002000] ACPI: Core revision 20170728
[ 0.005293] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.007307] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008532] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008696] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.008847] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.009235] mce: CPU supports 6 MCE banks
[ 0.009357] CPU0: Thermal monitoring enabled (TM2)
[ 0.009474] process: using mwait in idle threads
[ 0.009594] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.009711] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.009831] Spectre V2 : Mitigation: Full generic retpoline
[ 0.009950] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.010003] Speculative Store Bypass: Vulnerable
[ 0.010271] Freeing SMP alternatives memory: 60K
[ 0.013017] smpboot: Max logical packages: 2
[ 0.013572] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.024000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.024000] ... version: 2
[ 0.024000] ... bit width: 40
[ 0.024000] ... generic registers: 2
[ 0.024000] ... value mask: 000000ffffffffff
[ 0.024000] ... max period: 000000007fffffff
[ 0.024000] ... fixed-purpose events: 3
[ 0.024001] ... event mask: 0000000700000003
[ 0.024170] Hierarchical SRCU implementation.
[ 0.024434] smp: Bringing up secondary CPUs ...
[ 0.024652] x86: Booting SMP configuration:
[ 0.024768] .... node #0, CPUs: #1
[ 0.026032] smp: Brought up 1 node, 2 CPUs
[ 0.026238] smpboot: Total of 2 processors activated (11733.32 BogoMIPS)
[ 0.027212] devtmpfs: initialized
[ 0.027704] PM: Registering ACPI NVS region [mem 0xcf5e0000-0xcf5e2fff] (12288 bytes)
[ 0.028049] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.028241] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.028395] xor: measuring software checksum speed
[ 0.037679] prefetch64-sse: 15588.000 MB/sec
[ 0.047678] generic_sse: 13244.000 MB/sec
[ 0.048002] xor: using function: prefetch64-sse (15588.000 MB/sec)
[ 0.048002] RTC time: 7:33:49, date: 11/11/18
[ 0.048099] NET: Registered protocol family 16
[ 0.048563] cpuidle: using governor ladder
[ 0.049012] cpuidle: using governor menu
[ 0.049108] ACPI: bus type PCI registered
[ 0.049271] dca service started, version 1.12.1
[ 0.049401] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.049589] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.049723] PCI: Using configuration type 1 for base access
[ 0.054046] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.071005] raid6: sse2x1 gen() 4535 MB/s
[ 0.088003] raid6: sse2x1 xor() 4697 MB/s
[ 0.105011] raid6: sse2x2 gen() 4898 MB/s
[ 0.122002] raid6: sse2x2 xor() 5720 MB/s
[ 0.139002] raid6: sse2x4 gen() 8722 MB/s
[ 0.156006] raid6: sse2x4 xor() 6755 MB/s
[ 0.156122] raid6: using algorithm sse2x4 gen() 8722 MB/s
[ 0.156240] raid6: .... xor() 6755 MB/s, rmw enabled
[ 0.156357] raid6: using ssse3x2 recovery algorithm
[ 0.156508] ACPI: Added _OSI(Module Device)
[ 0.156623] ACPI: Added _OSI(Processor Device)
[ 0.156739] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.156855] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.160838] ACPI: Dynamic OEM Table Load:
[ 0.160959] ACPI: SSDT 0xFFFF88812A474800 00026C (v01 PmRef Cpu0Ist 00003000 INTL 20050930)
[ 0.161190] ACPI: Dynamic OEM Table Load:
[ 0.161309] ACPI: SSDT 0xFFFF88812A453400 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20050930)
[ 0.161772] ACPI: Interpreter enabled
[ 0.162017] ACPI: (supports S0 S3 S4 S5)
[ 0.162132] ACPI: Using IOAPIC for interrupt routing
[ 0.162269] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.162644] ACPI: Enabled 12 GPEs in block 00 to 3F
[ 0.167602] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.167726] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.167911] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.168074] PCI host bridge to bus 0000:00
[ 0.168191] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.168312] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.168433] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.168614] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.168796] pci_bus 0000:00: root bus resource [mem 0xcf650000-0xfebfffff window]
[ 0.169003] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.169128] pci 0000:00:00.0: [8086:29b0] type 00 class 0x060000
[ 0.169221] pci 0000:00:02.0: [8086:29b2] type 00 class 0x030000
[ 0.169230] pci 0000:00:02.0: reg 0x10: [mem 0xfde80000-0xfdefffff]
[ 0.169234] pci 0000:00:02.0: reg 0x14: [io 0xff00-0xff07]
[ 0.169238] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.169242] pci 0000:00:02.0: reg 0x1c: [mem 0xfdb00000-0xfdbfffff]
[ 0.169329] pci 0000:00:02.1: [8086:29b3] type 00 class 0x038000
[ 0.169336] pci 0000:00:02.1: reg 0x10: [mem 0xfdf00000-0xfdf7ffff]
[ 0.169456] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.169503] pci 0000:00:1a.0: reg 0x20: [io 0xfe00-0xfe1f]
[ 0.169619] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.169667] pci 0000:00:1a.1: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.169779] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.169826] pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.169944] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.169965] pci 0000:00:1a.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.170057] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.170141] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.170165] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.170249] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.170339] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.170428] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.170520] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.170609] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.170705] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.170753] pci 0000:00:1d.0: reg 0x20: [io 0xfb00-0xfb1f]
[ 0.170865] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.170911] pci 0000:00:1d.1: reg 0x20: [io 0xfa00-0xfa1f]
[ 0.171027] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.171074] pci 0000:00:1d.2: reg 0x20: [io 0xf900-0xf91f]
[ 0.171194] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.171215] pci 0000:00:1d.7: reg 0x10: [mem 0xfdffe000-0xfdffe3ff]
[ 0.171294] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.171373] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.171507] pci 0000:00:1f.0: [8086:2914] type 00 class 0x060100
[ 0.171582] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.171766] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.171888] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[ 0.172003] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.172186] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 04e0 (mask 001f)
[ 0.172368] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e0 (mask 001f)
[ 0.172643] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
[ 0.172663] pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807]
[ 0.172672] pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703]
[ 0.172680] pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607]
[ 0.172689] pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503]
[ 0.172697] pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf40f]
[ 0.172706] pci 0000:00:1f.2: reg 0x24: [io 0xf300-0xf30f]
[ 0.172814] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.172834] pci 0000:00:1f.3: reg 0x10: [mem 0xfdffd000-0xfdffd0ff 64bit]
[ 0.172858] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.173024] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[ 0.173044] pci 0000:00:1f.5: reg 0x10: [io 0xf100-0xf107]
[ 0.173052] pci 0000:00:1f.5: reg 0x14: [io 0xf000-0xf003]
[ 0.173061] pci 0000:00:1f.5: reg 0x18: [io 0xef00-0xef07]
[ 0.173070] pci 0000:00:1f.5: reg 0x1c: [io 0xee00-0xee03]
[ 0.173078] pci 0000:00:1f.5: reg 0x20: [io 0xed00-0xed0f]
[ 0.173088] pci 0000:00:1f.5: reg 0x24: [io 0xec00-0xec0f]
[ 0.173256] pci 0000:01:00.0: [8086:109a] type 00 class 0x020000
[ 0.173301] pci 0000:01:00.0: reg 0x10: [mem 0xfd8e0000-0xfd8fffff]
[ 0.173337] pci 0000:01:00.0: reg 0x18: [io 0xdf00-0xdf1f]
[ 0.173509] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.173580] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.173782] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.173900] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.173904] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.173910] pci 0000:00:1c.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.173977] pci 0000:02:00.0: [8086:109a] type 00 class 0x020000
[ 0.174024] pci 0000:02:00.0: reg 0x10: [mem 0xfdde0000-0xfddfffff]
[ 0.174060] pci 0000:02:00.0: reg 0x18: [io 0xbf00-0xbf1f]
[ 0.174232] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.174304] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.174504] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.174624] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.174628] pci 0000:00:1c.1: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.174634] pci 0000:00:1c.1: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.174675] pci 0000:03:06.0: [1050:0628] type 00 class 0x060100
[ 0.174786] pci 0000:03:0d.0: [1077:2200] type 00 class 0x010000
[ 0.174805] pci 0000:03:0d.0: reg 0x10: [io 0xcc00-0xccff]
[ 0.174814] pci 0000:03:0d.0: reg 0x14: [mem 0xfdaff000-0xfdafffff]
[ 0.174852] pci 0000:03:0d.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.174915] pci 0000:03:0e.0: [8086:107c] type 00 class 0x020000
[ 0.174936] pci 0000:03:0e.0: reg 0x10: [mem 0xfdac0000-0xfdadffff]
[ 0.174944] pci 0000:03:0e.0: reg 0x14: [mem 0xfdaa0000-0xfdabffff]
[ 0.174953] pci 0000:03:0e.0: reg 0x18: [io 0xcf00-0xcf3f]
[ 0.174984] pci 0000:03:0e.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.175019] pci 0000:03:0e.0: PME# supported from D0 D3hot D3cold
[ 0.175067] pci 0000:03:0f.0: [8086:107c] type 00 class 0x020000
[ 0.175088] pci 0000:03:0f.0: reg 0x10: [mem 0xfda80000-0xfda9ffff]
[ 0.175097] pci 0000:03:0f.0: reg 0x14: [mem 0xfda60000-0xfda7ffff]
[ 0.175105] pci 0000:03:0f.0: reg 0x18: [io 0xce00-0xce3f]
[ 0.175136] pci 0000:03:0f.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.175168] pci 0000:03:0f.0: PME# supported from D0 D3hot D3cold
[ 0.175223] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.175346] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.175350] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.175356] pci 0000:00:1e.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.175359] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.175361] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.175362] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.175364] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.175366] pci 0000:00:1e.0: bridge window [mem 0xcf650000-0xfebfffff window] (subtractive decode)
[ 0.175912] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.176050] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.176222] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 0.176394] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.176566] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.176800] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.177016] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.177188] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.177434] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.177434] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.177434] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.177434] vgaarb: loaded
[ 0.178086] SCSI subsystem initialized
[ 0.178208] libata version 3.00 loaded.
[ 0.178208] ACPI: bus type USB registered
[ 0.178208] usbcore: registered new interface driver usbfs
[ 0.178298] usbcore: registered new interface driver hub
[ 0.178424] usbcore: registered new device driver usb
[ 0.178560] pps_core: LinuxPPS API ver. 1 registered
[ 0.178678] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giom...@linux.it>
[ 0.179005] PTP clock support registered
[ 0.179135] EDAC MC: Ver: 3.0.0
[ 0.179213] PCI: Using ACPI for IRQ routing
[ 0.187468] PCI: pci_cache_line_size set to 64 bytes
[ 0.187533] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.187534] e820: reserve RAM buffer [mem 0xcf590000-0xcfffffff]
[ 0.187644] clocksource: Switched to clocksource refined-jiffies
[ 0.200489] VFS: Disk quotas dquot_6.6.0
[ 0.200635] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.200834] pnp: PnP ACPI init
[ 0.201150] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.201270] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.201389] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.201513] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.201547] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.201793] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.201974] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.202241] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.202332] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.202393] system 00:06: [io 0x0400-0x04bf] could not be reserved
[ 0.202518] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.202707] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.202831] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.202918] system 00:08: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.203000] system 00:08: [mem 0xcf600000-0xcf6fffff] could not be reserved
[ 0.203122] system 00:08: [mem 0xcf5e0000-0xcf5fffff] could not be reserved
[ 0.203244] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.203366] system 00:08: [mem 0x00100000-0xcf5dffff] could not be reserved
[ 0.203487] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.203609] system 00:08: [mem 0xfed13000-0xfed1ffff] has been reserved
[ 0.203730] system 00:08: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.203851] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.203999] system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.204121] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.204241] system 00:08: [mem 0x000e0000-0x000effff] has been reserved
[ 0.204365] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.204371] pnp: PnP ACPI: found 9 devices
[ 0.210450] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.210644] clocksource: Switched to clocksource acpi_pm
[ 0.210644] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.210644] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.210644] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.210644] pci 0000:00:1c.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.210743] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.210861] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.210983] pci 0000:00:1c.1: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.211114] pci 0000:00:1c.1: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.211304] pci 0000:03:0d.0: BAR 6: assigned [mem 0xfda00000-0xfda1ffff pref]
[ 0.211485] pci 0000:03:0e.0: BAR 6: assigned [mem 0xfda20000-0xfda3ffff pref]
[ 0.211667] pci 0000:03:0f.0: BAR 6: assigned [mem 0xfda40000-0xfda5ffff pref]
[ 0.211848] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.211966] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.212098] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.212220] pci 0000:00:1e.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.212407] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.212409] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.212411] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.212412] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.212414] pci_bus 0000:00: resource 8 [mem 0xcf650000-0xfebfffff window]
[ 0.212416] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.212418] pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 0.212419] pci_bus 0000:01: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.212421] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.212422] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.212424] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.212426] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.212427] pci_bus 0000:03: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.212429] pci_bus 0000:03: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.212430] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.212432] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.212434] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.212435] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.212437] pci_bus 0000:03: resource 8 [mem 0xcf650000-0xfebfffff window]
[ 0.212500] NET: Registered protocol family 2
[ 0.212776] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.213094] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.213411] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.213581] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.213725] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.213904] NET: Registered protocol family 1
[ 0.214153] RPC: Registered named UNIX socket transport module.
[ 0.214272] RPC: Registered udp transport module.
[ 0.214388] RPC: Registered tcp transport module.
[ 0.214504] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.214634] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.215871] PCI: CLS 64 bytes, default 64
[ 0.215916] Trying to unpack rootfs image as initramfs...
[ 0.485912] Freeing initrd memory: 23388K
[ 0.486070] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.486190] software IO TLB: mapped [mem 0xcb590000-0xcf590000] (64MB)
[ 0.486861] Scanning for low memory corruption every 60 seconds
[ 0.487323] audit: initializing netlink subsys (disabled)
[ 0.487477] audit: type=2000 audit(1541921628.486:1): state=initialized audit_enabled=0 res=1
[ 0.487606] workingset: timestamp_bits=56 max_order=20 bucket_order=0
[ 0.489694] DLM installed
[ 0.490206] NFS: Registering the id_resolver key type
[ 0.490330] Key type id_resolver registered
[ 0.490445] Key type id_legacy registered
[ 0.490563] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.490685] Installing knfsd (copyright (C) 1996 ok...@monad.swb.de).
[ 0.490997] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.491216] fuse init (API version 7.26)
[ 0.491421] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 0.492988] async_tx: api initialized (async)
[ 0.493134] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.493316] io scheduler noop registered
[ 0.493431] io scheduler deadline registered
[ 0.493572] io scheduler cfq registered (default)
[ 0.493689] io scheduler mq-deadline registered
[ 0.493805] io scheduler kyber registered
[ 0.493945] io scheduler bfq registered
[ 0.494604] ipmi message handler version 39.2
[ 0.494722] ipmi device interface
[ 0.494849] IPMI System Interface driver.
[ 0.494987] ipmi_si: Unable to find any System Interface(s)
[ 0.495129] IPMI Watchdog: driver initialized
[ 0.495245] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 0.495523] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.495717] ACPI: Power Button [PWRB]
[ 0.495881] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.496101] ACPI: Power Button [PWRF]
[ 0.496646] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.496925] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.497074] ACPI: Thermal Zone [THRM] (40 C)
[ 0.497215] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 0.497430] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.518215] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.539072] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.541367] Non-volatile memory driver v1.3
[ 0.541513] Linux agpgart interface v0.103
[ 0.541731] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 0.543840] brd: module loaded
[ 0.545585] loop: module loaded
[ 0.548218] drbd: initialized. Version: 8.4.10 (api:1/proto:86-101)
[ 0.548341] drbd: built-in
[ 0.548454] drbd: registered as block device major 147
[ 0.548696] rbd: loaded
[ 0.548809] mtip32xx Version 1.3.1
[ 0.549419] null: module loaded
[ 0.549557] Loading iSCSI transport class v2.0-870.
[ 0.549782] alua: device handler registered
[ 0.549987] fnic: Cisco FCoE HBA Driver, ver 1.6.0.34
[ 0.550164] fnic: Successfully Initialized Trace Buffer
[ 0.550374] fnic: Successfully Initialized FC_CTLR Trace Buffer
[ 0.550626] bnx2fc: QLogic FCoE Driver bnx2fc v2.11.8 (October 15, 2015)
[ 0.550871] iscsi: registered transport (tcp)
[ 0.551015] Adaptec aacraid driver 1.2.1[50834]-custom
[ 0.551203] Microsemi PQI Driver (v1.1.2-125)
[ 0.551336] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 0.551548] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 0.551682] megasas: 07.702.06.00-rc1
[ 0.551816] mpt3sas version 15.100.00.00 loaded
[ 0.552025] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 0.552217] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 0.552410] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015)
[ 0.552595] Chelsio T3 iSCSI Driver cxgb3i v2.0.1-ko (Apr. 2015)
[ 0.552724] iscsi: registered transport (cxgb3i)
[ 0.552840] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014)
[ 0.552970] iscsi: registered transport (bnx2i)
[ 0.553204] esas2r: driver will not be loaded because no ATTO esas2r devices were found
[ 0.553404] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.553534] hv_vmbus: registering driver hv_storvsc
[ 0.553652] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[ 0.553991] ata_piix 0000:00:1f.2: version 2.13
[ 0.554129] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.554928] scsi host0: ata_piix
[ 0.555178] scsi host1: ata_piix
[ 0.555342] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[ 0.555467] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[ 0.555664] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.556299] scsi host2: ata_piix
[ 0.556529] scsi host3: ata_piix
[ 0.556691] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
[ 0.556814] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
[ 0.557090] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[ 0.557284] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10)
[ 0.557615] enic: Cisco VIC Ethernet NIC Driver, ver 2.3.0.42
[ 0.557825] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.557945] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.558088] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.558210] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.872231] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.883285] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.987124] e1000 0000:03:0e.0 eth0: (PCI:33MHz:32-bit) 68:05:ca:b4:0c:8f
[ 0.987248] e1000 0000:03:0e.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.328090] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.328233] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.328501] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.328636] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.328765] ata2.01: link offline, clearing class 3 to NONE
[ 1.330810] ata1.00: supports DRM functions and may not be fully accessible
[ 1.330946] ata1.00: ATA-11: Samsung SSD 860 EVO 2TB, RVT03B6Q, max UDMA/133
[ 1.331086] ata1.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.335628] ata1.00: supports DRM functions and may not be fully accessible
[ 1.337554] ata1.00: configured for UDMA/133
[ 1.348181] ata2.00: ATAPI: Slimtype DVD A DS8ACSH, LP5M, max UDMA/133
[ 1.386177] ata2.00: configured for UDMA/133
[ 1.408098] e1000 0000:03:0f.0 eth1: (PCI:33MHz:32-bit) 68:05:ca:a1:01:f9
[ 1.408221] e1000 0000:03:0f.0 eth1: Intel(R) PRO/1000 Network Connection
[ 1.408357] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.408475] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.408738] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.504030] tsc: Refined TSC clocksource calibration: 2933.333 MHz
[ 1.504174] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a4843aceae, max_idle_ns: 440795305103 ns
[ 1.514498] e1000e 0000:01:00.0 eth2: (PCI Express:2.5GT/s:Width x1) 00:03:1d:10:3a:1b
[ 1.514681] e1000e 0000:01:00.0 eth2: Intel(R) PRO/1000 Network Connection
[ 1.514873] e1000e 0000:01:00.0 eth2: MAC: 2, PHY: 2, PBA No: FFFFFF-0FF
[ 1.515139] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.620496] e1000e 0000:02:00.0 eth3: (PCI Express:2.5GT/s:Width x1) 00:03:1d:10:3a:1c
[ 1.620680] e1000e 0000:02:00.0 eth3: Intel(R) PRO/1000 Network Connection
[ 1.620873] e1000e 0000:02:00.0 eth3: MAC: 2, PHY: 2, PBA No: FFFFFF-0FF
[ 1.621022] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 1.621143] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.621277] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 1.621458] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.621589] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
[ 1.621769] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 1.621946] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 4.1.0-k
[ 1.622139] ixgbevf: Copyright (c) 2009 - 2015 Intel Corporation.
[ 1.622312] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 2.1.14-k
[ 1.622495] i40e: Copyright (c) 2013 - 2014 Intel Corporation.
[ 1.622670] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 1.622791] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 1.622921] i40evf: Intel(R) 40-10 Gigabit Virtual Function Network Driver - version 3.0.0-k
[ 1.623113] Copyright (c) 2013 - 2015 Intel Corporation.
[ 1.623288] sky2: driver version 1.30
[ 1.623477] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.66
[ 1.623626] QLogic/NetXen Network Driver v4.0.82
[ 1.623792] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[ 1.623924] hv_vmbus: registering driver hv_netvsc
[ 1.624049] Fusion MPT base driver 3.04.20
[ 1.624164] Copyright (c) 1999-2008 LSI Corporation
[ 1.624284] Fusion MPT SPI Host driver 3.04.20
[ 1.624414] Fusion MPT FC Host driver 3.04.20
[ 1.624547] Fusion MPT SAS Host driver 3.04.20
[ 1.624678] Fusion MPT misc device (ioctl) driver 3.04.20
[ 1.624836] mptctl: Registered with Fusion MPT base driver
[ 1.624954] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 1.625080] Fusion MPT LAN driver 3.04.20
[ 1.625449] aoe: AoE v85 initialised.
[ 1.625610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.625729] ehci-pci: EHCI PCI platform driver
[ 1.625941] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.626108] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.626298] ehci-pci 0000:00:1a.7: debug port 1
[ 1.630325] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.630338] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 1.637018] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.637250] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.637372] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.637554] usb usb1: Product: EHCI Host Controller
[ 1.637671] usb usb1: Manufacturer: Linux 4.14.91-esos.prod ehci_hcd
[ 1.637790] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.638027] hub 1-0:1.0: USB hub found
[ 1.638153] hub 1-0:1.0: 6 ports detected
[ 1.638543] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.638698] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.638888] ehci-pci 0000:00:1d.7: debug port 1
[ 1.642929] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.642939] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 1.650023] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.650255] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.650376] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.650557] usb usb2: Product: EHCI Host Controller
[ 1.650675] usb usb2: Manufacturer: Linux 4.14.91-esos.prod ehci_hcd
[ 1.650795] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.651023] hub 2-0:1.0: USB hub found
[ 1.651149] hub 2-0:1.0: 6 ports detected
[ 1.651451] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.651573] ohci-pci: OHCI PCI platform driver
[ 1.651699] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.651888] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.652067] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.652277] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
[ 1.652478] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.652599] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.652779] usb usb3: Product: UHCI Host Controller
[ 1.652896] usb usb3: Manufacturer: Linux 4.14.91-esos.prod uhci_hcd
[ 1.653026] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.653240] hub 3-0:1.0: USB hub found
[ 1.653366] hub 3-0:1.0: 2 ports detected
[ 1.653660] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.653813] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.654031] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
[ 1.654235] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.654356] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.654536] usb usb4: Product: UHCI Host Controller
[ 1.656396] usb usb4: Manufacturer: Linux 4.14.91-esos.prod uhci_hcd
[ 1.656516] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.656726] hub 4-0:1.0: USB hub found
[ 1.656852] hub 4-0:1.0: 2 ports detected
[ 1.657148] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.657301] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.657503] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
[ 1.657701] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.657822] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.658014] usb usb5: Product: UHCI Host Controller
[ 1.658134] usb usb5: Manufacturer: Linux 4.14.91-esos.prod uhci_hcd
[ 1.658255] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.658464] hub 5-0:1.0: USB hub found
[ 1.658589] hub 5-0:1.0: 2 ports detected
[ 1.658873] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.659043] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.659245] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
[ 1.659439] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.659560] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.659741] usb usb6: Product: UHCI Host Controller
[ 1.659859] usb usb6: Manufacturer: Linux 4.14.91-esos.prod uhci_hcd
[ 1.659979] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.660207] hub 6-0:1.0: USB hub found
[ 1.660332] hub 6-0:1.0: 2 ports detected
[ 1.660614] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.660768] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.660969] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
[ 1.661187] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.661308] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.661489] usb usb7: Product: UHCI Host Controller
[ 1.661607] usb usb7: Manufacturer: Linux 4.14.91-esos.prod uhci_hcd
[ 1.661727] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.661945] hub 7-0:1.0: USB hub found
[ 1.662083] hub 7-0:1.0: 2 ports detected
[ 1.662363] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.662524] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.662724] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
[ 1.662916] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.663055] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.663237] usb usb8: Product: UHCI Host Controller
[ 1.663354] usb usb8: Manufacturer: Linux 4.14.91-esos.prod uhci_hcd
[ 1.663475] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.663687] hub 8-0:1.0: USB hub found
[ 1.663813] hub 8-0:1.0: 2 ports detected
[ 1.664107] usbcore: registered new interface driver usb-storage
[ 1.664262] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.664382] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.665295] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.665422] hv_vmbus: registering driver hyperv_keyboard
[ 1.665589] mousedev: PS/2 mouse device common for all mice
[ 1.665816] rtc_cmos 00:01: RTC can wake from S4
[ 1.666077] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.666218] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram
[ 1.666445] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.667172] IR NEC protocol handler initialized
[ 1.667289] IR RC5(x/sz) protocol handler initialized
[ 1.667406] IR RC6 protocol handler initialized
[ 1.667522] IR JVC protocol handler initialized
[ 1.667638] IR Sony protocol handler initialized
[ 1.667754] IR SANYO protocol handler initialized
[ 1.667870] IR Sharp protocol handler initialized
[ 1.667986] IR MCE Keyboard/mouse protocol handler initialized
[ 1.668121] IR XMP protocol handler initialized
[ 1.668311] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[ 1.668555] md-cluster: EXPERIMENTAL. Use with caution
[ 1.668673] Registering Cluster MD functions
[ 1.668866] device-mapper: uevent: version 1.0.3
[ 1.669059] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-d...@redhat.com
[ 1.669333] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 1.669454] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 1.669574] device-mapper: multipath service-time: version 0.3.0 loaded
[ 1.669704] device-mapper: raid: Loading target version 1.13.0
[ 1.669918] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 1.670132] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.670352] usbcore: registered new interface driver usbhid
[ 1.670469] usbhid: USB HID core driver
[ 1.670591] hv_utils: Registering HyperV Utility Driver
[ 1.670710] hv_vmbus: registering driver hv_util
[ 1.670826] hv_vmbus: registering driver hv_balloon
[ 1.670950] AMD(R) PCI-E Non-Transparent Bridge Driver 1.0
[ 1.671100] IDT PCI-E Non-Transparent Bridge Driver 2.0
[ 1.671232] Intel(R) PCI-E Non-Transparent Bridge Driver 2.0
[ 1.671364] Software Queue-Pair Transport over NTB, version 4
[ 1.671513] u32 classifier
[ 1.671625] Actions configured
[ 1.671743] Netfilter messages via NETLINK v0.30.
[ 1.671937] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.672098] ctnetlink v0.93: registering with nfnetlink.
[ 1.672338] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.672555] Initializing XFRM netlink socket
[ 1.672793] NET: Registered protocol family 10
[ 1.673271] Segment Routing with IPv6
[ 1.673405] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.673627] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.673883] NET: Registered protocol family 17
[ 1.674101] RPC: Registered rdma transport module.
[ 1.674218] RPC: Registered rdma backchannel transport module.
[ 1.674337] 8021q: 802.1Q VLAN Support v1.8
[ 1.674464] sctp: Hash tables configured (bind 256/256)
[ 1.674665] Key type dns_resolver registered
[ 1.674783] Key type ceph registered
[ 1.674954] libceph: loaded (mon/osd proto 15/24)
[ 1.675409] microcode: sig=0x1067a, pf=0x1, revision=0xa04
[ 1.675573] microcode: Microcode Update Driver: v2.2.
[ 1.675584] sched_clock: Marking stable (1675568804, 0)->(1781945393, -106376589)
[ 1.675973] registered taskstats version 1
[ 1.676269] Btrfs loaded, crc32c=crc32c-generic
[ 1.676691] Magic number: 10:626:571
[ 1.676909] console [netcon0] enabled
[ 1.677036] netconsole: network logging started
[ 2.364018] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[ 2.512077] clocksource: Switched to clocksource tsc
[ 2.973043] usb 6-1: New USB device found, idVendor=413c, idProduct=2101
[ 2.973174] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.973305] usb 6-1: Product: Dell Smart Card Reader Keyboard
[ 2.973425] usb 6-1: Manufacturer: Dell
[ 2.980414] input: Dell Dell Smart Card Reader Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/0003:413C:2101.0001/input/input3
[ 3.032187] hid-generic 0003:413C:2101.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on usb-0000:00:1d.0-1/input0
[ 3.616031] floppy0: no floppy controllers found
[ 3.616171] work still pending
[ 3.616429] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 3B6Q PQ: 0 ANSI: 5
[ 3.616714] ata1.00: Enabling discard_zeroes_data
[ 3.616751] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.616856] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.617148] sd 0:0:0:0: [sda] Write Protect is off
[ 3.617266] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.617274] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.617627] ata1.00: Enabling discard_zeroes_data
[ 3.620373] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 3.620791] ata1.00: Enabling discard_zeroes_data
[ 3.620947] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.623802] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8ACSH LP5M PQ: 0 ANSI: 5
[ 3.668010] usb 6-2: new low-speed USB device number 3 using uhci_hcd
[ 3.675654] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 3.675852] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.676096] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.676187] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.677281] Freeing unused kernel memory: 1288K
[ 3.682015] Write protecting the kernel read-only data: 24576k
[ 3.683023] Freeing unused kernel memory: 2004K
[ 3.687759] Freeing unused kernel memory: 1944K
[ 3.687885] rodata_test: all tests were successful
[ 4.467045] usb 6-2: New USB device found, idVendor=03f0, idProduct=134a
[ 4.467048] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.467051] usb 6-2: Product: HP USB Optical Mouse
[ 4.467054] usb 6-2: Manufacturer: PixArt
[ 4.482358] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:03F0:134A.0002/input/input4
[ 4.482433] hid-generic 0003:03F0:134A.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 8.790734] random: fast init done
[ 8.824627] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 58.065056] random: perl: uninitialized urandom read (4 bytes read)
[ 58.287295] random: perl: uninitialized urandom read (4 bytes read)
[ 58.464925] udevd[703]: starting version 3.2.5
[ 58.464993] random: udevd: uninitialized urandom read (16 bytes read)
[ 58.465811] udevd[703]: specified group 'render' unknown
[ 58.465973] udevd[703]: specified group 'kvm' unknown
[ 58.467720] udevd[704]: starting eudev-3.2.5
[ 58.520485] e1000e 0000:01:00.0 enp1s0: renamed from eth2
[ 58.524776] e1000e 0000:02:00.0 enp2s0: renamed from eth3
[ 58.526328] e1000 0000:03:0f.0 enp3s15: renamed from eth1
[ 58.530179] e1000 0000:03:0e.0 enp3s14: renamed from eth0
[ 71.876510] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1
[ 71.900566] cls: loading out-of-tree module taints kernel.
[ 71.900957] Athena Host Driver Version 0.1.4
[ 71.901027] cls: loaded.
[ 71.927830] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 72.112438] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 72.112439] 8021q: adding VLAN 0 to HW filter on device enp1s0
[ 72.296430] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 72.296431] 8021q: adding VLAN 0 to HW filter on device enp2s0
[ 72.298001] IPv6: ADDRCONF(NETDEV_UP): enp3s14: link is not ready
[ 72.298007] 8021q: adding VLAN 0 to HW filter on device enp3s14
[ 72.299358] IPv6: ADDRCONF(NETDEV_UP): enp3s15: link is not ready
[ 72.299360] 8021q: adding VLAN 0 to HW filter on device enp3s15
[ 72.321222] e1000: enp3s14 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 72.343186] e1000: enp3s15 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 72.343321] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s14: link becomes ready
[ 72.343375] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s15: link becomes ready
[ 74.433993] e1000e: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 74.434140] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 74.655991] e1000e: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 74.656131] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 82.535242] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.01-k.
[ 82.535410] qla2xxx [0000:03:0d.0]-001d: : Found an ISP2200 irq 19 iobase 0xffffc90000689000.
[ 90.636124] scsi host4: qla2xxx
[ 90.644045] qla2xxx [0000:03:0d.0]-00fb:4: QLogic QLA22xx - .
[ 90.644050] qla2xxx [0000:03:0d.0]-00fc:4: ISP2200: PCI (33 MHz) @ 0000:03:0d.0 hdma+ host#=4 fw=2.02.08 TP.
[ 90.644052] qla2xxx [0000:03:0d.0]-e070:4: This adapter does not support target mode.
[ 95.659199] SPL: Loaded module v0.7.4-1
[ 95.666289] icp: module license 'CDDL' taints kernel.
[ 95.666291] Disabling lock debugging due to kernel taint
[ 97.329843] ZFS: Loaded module v0.7.4-1, ZFS pool version 5000, ZFS filesystem version 5
[ 97.859583] XFS (dm-0): Mounting V5 Filesystem
[ 97.891858] XFS (dm-0): Ending clean mount
[ 97.919727] scst: Attached to scsi0, channel 0, id 0, lun 0, type 0
[ 97.919746] scst: Attached to scsi1, channel 0, id 0, lun 0, type 5
[ 97.919768] scst: User interface thread started
[ 97.920358] scst: Init thread started
[ 97.920375] scst: Task management thread started
[ 97.920390] scst: Management thread started
[ 97.920396] scst: Target template copy_manager registered successfully
[ 97.920416] scst: Target copy_manager_tgt for template copy_manager registered successfully
[ 97.920419] scst: Using security group "copy_manager_tgt" for initiator "copy_manager_sess" (target copy_manager_tgt)
[ 97.920457] scst: SCST version 3.3.0 loaded successfully (global max mem for commands ignored, per device 367MB)
[ 97.926422] iscsi-scst: iSCSI SCST Target - version 3.3.0
[ 97.926424] iscsi-scst: Registered iSCSI transport: iSCSI-TCP
[ 97.926604] scst: Target template iscsi registered successfully
[ 97.926671] iscsi-scst: Read thread for pool ffff888124a4c600 started
[ 97.926690] iscsi-scst: Read thread for pool ffff888124a4c600 started
[ 97.926707] iscsi-scst: Write thread for pool ffff888124a4c600 started
[ 97.926866] iscsi-scst: Write thread for pool ffff888124a4c600 started
[ 97.931295] iscsi-scst: Registered iSCSI transport: iSER
[ 97.940609] scst: Target template ib_srpt registered successfully
[ 97.942703] scst: Device handler "dev_disk" for type 0 registered successfully
[ 97.942707] scst: Device handler "dev_disk_perf" for type 0 registered successfully
[ 97.945871] scst: Virtual device handler vdisk_fileio for type 0 registered successfully
[ 97.945875] scst: Virtual device handler vdisk_blockio for type 0 registered successfully
[ 97.945878] scst: Virtual device handler vdisk_nullio for type 0 registered successfully
[ 97.945880] scst: Virtual device handler vcdrom for type 5 registered successfully
[ 97.947659] scst: Device handler "dev_tape" for type 1 registered successfully
[ 97.947663] scst: Device handler "dev_tape_perf" for type 1 registered successfully
[ 97.949518] scst: Device handler "dev_changer" for type 8 registered successfully
[ 97.952621] scst: Target template fcst registered successfully
[ 97.954722] sqatgt: Initializing SCST Cavium adapter target driver interface - driver version=10.00.00.01-k, SCST version=3.3.0, Cavium version=10.00.00.01-k
[ 97.954729] scst: Target template qla2x00t registered successfully
[ 97.957155] iscsi-scst: Created iser portal cm_id:ffff88812f63d000
[ 97.957161] iscsi-scst: iser portal cm_id:ffff88812f63d000 listens on: 0.0.0.0:3260
[ 97.957164] iscsi-scst: Created iser portal cm_id:ffff88812f63e800
[ 97.957166] iscsi-scst: iser portal cm_id:ffff88812f63e800 listens on: 0000:0000:0000:0000:0000:0000:0000:0000 3260
[ 98.065450] dev_vdisk: Registering virtual vdisk_fileio device ssr_scsi1 (ROTATIONAL)
[ 98.065516] dev_vdisk: Attached SCSI target virtual disk ssr_scsi1 (file="/mnt/vdisks/gh_ssr/ssr_disk", fs=30720MB, bs=512, nblocks=62914560, cyln=30720)
[ 98.066257] scst: Added device ssr_scsi1 to group copy_manager_tgt (LUN 0, flags 0x4) to target copy_manager_tgt
[ 98.066274] scst: Attached to virtual device ssr_scsi1 (id 1)
[ 98.068331] scst: Target iqn.2020-07.esos.ssr:0a068 for template iscsi registered successfully
[ 98.075711] scst: Added device ssr_scsi1 to group ssr_group1 (LUN 0, flags 0x2) to target iqn.2020-07.esos.ssr:0a068
[ 98.076402] scst: Added name iqn.1991-05.com.microsoft:esos to group ssr_group1 (target iqn.2020-07.esos.ssr:0a068)
[ 125.536059] random: crng init done
[ 125.536064] random: 7 urandom warning(s) missed due to ratelimiting
[root@ssr ~]#
Marc Smith
Nov 15, 2020, 12:31:53 AM11/15/20
to esos-...@googlegroups.com
On Wed, Nov 11, 2020 at 1:53 PM jayson....@gmail.com
<jayson....@gmail.com> wrote:
>
> [ 0.000000] Linux version 4.14.91-esos.prod (buil...@chicago.parodyne.com) (gcc version 7.4.0 (GCC)) #1 SMP Sat Mar 16 07:33:11 UTC 2019
I guess that's pretty clear cut eh! =) Says your adapter is not
supported, so yeah, you'll need a different QLogic FC adapter to use
this driver.
--Marc
> [ 95.659199] SPL: Loaded module v0.7.4-1
> To view this discussion on the web visit https://groups.google.com/d/msgid/esos-users/90b53876-67aa-489f-bf42-c4a00ec9f2aen%40googlegroups.com.
<jayson....@gmail.com> wrote:
>
> [ 0.000000] Linux version 4.14.91-esos.prod (buil...@chicago.parodyne.com) (gcc version 7.4.0 (GCC)) #1 SMP Sat Mar 16 07:33:11 UTC 2019
supported, so yeah, you'll need a different QLogic FC adapter to use
this driver.
--Marc
> [ 95.659199] SPL: Loaded module v0.7.4-1
Reply all
Reply to author
Forward
0 new messages