Looking for some assistance please installing ESOS to an internal RAID volume, which is 4TB in size.
*** Enterprise Storage OS master_50546e9_dgvszq Install Script ***
### Checking for required tools...
### Verifying checksums...
esos-master_50546e9_dgvszq.img.tar.bz2: OK
esos-master_50546e9_dgvszq.img.tar.bz2: OK
### Here is a list of disk devices on this machine:
NAME VENDOR MODEL REV SIZE TRAN SUBSYSTEMS
/dev/loop0 1.8G block
/dev/sda DELL PERC_6_i 1.22 3.7T block:scsi:pci
/dev/sdb JetFlash Transcend_8GB 8.07 7.3G usb block:scsi:usb:pci
/dev/sdc ADATA USB_Flash_Drive 0.00 7.2G usb block:scsi:usb:pci
### Please type the full path of your destination device node (eg, /dev/sdz):
/dev/sda
### Proceeding will completely wipe the '/dev/sda' device. Are you sure (yes/no)?
yes
### Writing 'esos-master_50546e9_dgvszq.img.tar.bz2' to '/dev/sda'; this may take a while...
0+163384 records in
0+163384 records out
8589934592 bytes (8.6 GB, 8.0 GiB) copied, 166.351 s, 51.6 MB/s
### It appears the image was successfully written to disk (no errors reported)!
### Large installation target detected; adding the 'esos_data' file system...
/dev/sda4: 2 bytes were erased at offset 0x00000438 (ext4): 53 ef
Error: partition length of
7797209088 sectors exceeds the msdos-partition-table-imposed maximum of 4294967295
Any assistance on how to complete this installation would be greatly appreciated.