Polymax Pc Review
Astryd Boschee
j'ai install le synth Polymax aprs avoir up^grad de cubase pro11 13. Bien que le plugin soit enregistr dans mon ilock physique, ds que j'ouvre une piste instru avec Polymax, cubase plante instantanment. je me passerai de ce synth. Dommage .
I use Cubase 13 Pro, I recently installed a full version of PolyMAX Synth and I've had issues with my iLok account ever since. I don't like having my DAW constantly connected to the internet, it seems the only way to get PolyMAX to load and run ok is if I keep my DAW online. Not having the option to work offline really sucks.
When you like to use this synth offline (with a live performance or in an offline studio) this expensive synth is not a choice to make. The synth makes terrible noises when it is not connected to the internet. Although the synth is great, it will because of this never be extensively used like all other software that depends on an internet connection. No good for musicians on the road!
What you need when you start in synthesis music ? A reliable, straightforward, easy to use synth with accurate modelled oscillators, creamy filters & snappy envelopes all implemented in a user friendly interface & PolyMax is genius for this. You have everything needed to understand the fundamental of synthesis. Both LED amp & filter envelope help you understand the goal of an envelope. You don't need to dive & get lost in sub menus. All is there ready to use. Last but not least, the sound of the analog-modeled oscillators are a faithful recreation of an era that you should all start with when you want to start in sound synthesis.
The presets that come with it are good starting points. Spending a few minutes to to make them your own really transforms it into something special. By dialing back the effects and tweaking the envelopes slightly I now have a great collection of playable patches. If you want long-evolving, one-note weirdo sounds that require 90 modulation sources, this one is not the best option.
I've downloaded quite a few of these kinds of synths. This one really is exceptional. Some really nice ARPS, very clean, smooth and tastefully done. Just started delving into it without even using any modifications on sounds. This has creative potential as the sounds will mix in very well with various projects. Hardly ever leave a review but this deserves one. Nice work!
De superbe sonorit et une interface facile explorer. Malheureusement, du fait de la licence ilok cloud PolyMax ne fonctionne pas sur mon mac quand je suis sur scne loin d'une connexion internet. Le transfert de licence ( du cloud Ilok vers l'ordi ) est peut-tre possible mais particulirement mal document. Par consquent je ne l'utilise plus et j'ai donn ma prfrence au GX-80 de Cherry audio dont les modalits de licences sont nettement moins alambiques. C'est dommage de devoir renoncer de belles ralisations du fait d'une stratgie de licence tiers qui manque de souplesse.
I'm not a guy that writes reviews, and don't get me wrong I love my other UAD plug-ins... Wasnt really expecting much from this plugin which came bundled with others I wanted. But to my surprise it is amazing, the clear vintage sound, the simplicity and great presets, make this a must! Thanks, UAD!!!!
Being a long-time Roland fan (I used to own a Juno 60) I had considered getting the Roland subscription so I could access any of the Roland Synths. But when I listened to this synth, I realized this synth was all I needed. I was rewarded even more once I started using it and going through the presets. I've already added it to my primary template for Cubase. As a a writer and producer I feel I found the pot of gold at the end of the rainbow.
Built after the original HEGNER prototype, it has solid, all-cast construction (including the saw table), a 4-speed belt drive and 2 stroke settings (allowing for eight sawing speeds), 20" throat, 1 7/8" thickness capacity, and it was called "the ultimate tool" in its WORKBENCH review. Our Model includes the Hold Down Arm with Finger Guard (not shown in the video) and a specially designed heavy-duty welded steel stand.
With your Polymax-3, you get the Scroll Saw fully assembled with a hold-down arm, dual-tilt worktable, and sawdust management system. It also includes an assortment of 76 saw blades and miscellaneous operating hardware.
Your Hegner Polymax-3 can be used with or without the stand but we strongly encourage it. Nearly every customer who purchases the saw without the stand ends up coming back to us eventually to buy the stand. It helps optimize the performance of the saw and ensures smooth operation by absorbing the vibration inherent in scroll saws. That's why we are deciding to include the stand with your purchase so you can see for yourself! This particular stand only works with the Polymax-3. There is a separate stand for the M14-E, M18-V, and M22-V.
While the Standard Blade Clamps get the job done, the QuickClamp makes for a better experience with your Hegner Scroll Saw. The QuickClamp allows you to instantly align your blade in the same position every time. Since it doesn't require a wrench, it's super fast to release and re-tighten for speedy blade changes - especially useful for those frequent inside cuts! The easy-grip knurled aluminum knob places pressure directly on the blade for slip-free tightening. The QuickClamp is designed to be locked into place in the upper arm and accepts all blade sizes.
If you have any questions at all, we'd be happy to help. We are the Exclusive Hegner Dealer in the U.S.A. and are experts on the Hegner Machine. With our current limited-time Hegner Promotion, we've never seen lower prices on this Legendary Machine.
I'm fairly new to scroll sawing. Someone offered to sell me a Hegner Polymax, which is suppose to be the best out there, but from 1989. They're asking for US$600 and say that it's been in the garage for 20 years, laying unused. We oiled it and I spent a few hours reading the instructions and sawing stuff with it, changing blades etc and it seems to work well. I checked the blade tightening knob, the clamps and knobs to change blades, the tilting table and the air pump and everything seems in working order. There's some rust in the metal part where the pulley/belt is, but other than that the machine looks in good cosmetic condition. Should I go for it?
It is a good saw that you can still buy parts for. However it is only worth $200 to $250 at the most. I bought one a couple of years ago for $150 then had to put new bellows on it and purchased the quick change blade holder for the top and a couple extra blade holders for the bottom. It was a good saw and I made quite a few projects with it including fret work and intarsia before I traded it off.
Hi, I have a polymax, I also have a EX 30, in my opinion the EX 30 is much more enjoyable to use, so much more accurate, I spent hundreds of pounds on bearings, belts, condenser, bellows, clamps , rear tension-er lever ( only knob on original, pain doing lots of holes with) Hegner charges are daylight robbery old technology will go forever like a farm tractor, lovely bit of enginering, but give me a smooth modern quite car every time . I stack cut and do very fine detail cuts close together with the EX 30.
Both are good saws and I have both and would say each is worth what you are paying for them - the Excalibur being the better saw but the DeWalt still a very good saw. I would take either new over a 26 year old Hegner.
Thanks a lot for the answers. The question I'd like to know is how is the Hegner Polymax being sold today for 3 grand different from a 1986 Polymax. The main components, as far as I can observe, all look almost exactly the same.
"A great machine. I had tried the Dewalt 788 (two of them, as a matter of fact!), and this one is far superior in every respect. It is important to have a good solid base in order to reduce vibration. Also, if one intends to do fret work, the QuickClamp is highly recommended. The parallel arms reduces the forward and backward movement of the saw blade to a minimum, a solid base reduces vibration and noise to a non-factor, and changing blades is every bit as easy as was it was with the Dewalt. What I really like about this machine is the simplicity of the engineering. Machines with less complicated designs are always better. This is truly a five-star machine."
I have a 2008 Hegner polymax that is my ,go to, saw. I also have a 1986 Hegner multimax 25: that still runs great. I paid $600 for it three years ago; I say buy that Polymax. IT is a bargain. The main advantage of this saw is that it is very durable and you can still get all the parts for it. If you plan on cutting 3/4" or thicker material you will need a saw like this. IF you will only do fretwork I would not recommend it. Cheaper, expendable saw would be a better choice then. A new Polymax costs about $3000.
In my experience, cutting thick wood, even pine, on a DeWalt will kill it over time. It is great for fretwork with thinner stock though. You can fit 1 3/4" stock with a Polymax. Cutting thick aluminum will depend on getting the right blade for it and a very slow feed rate. If you call Mike's workshop he will advise you on which blade is best for aluminum. Congratulations on your purchase. I have my Polymax on a Polymax stand and have it bolted to the floor to dampen any vibration.
Thank you very much for your feedback. I have just ordered a roll from Prusa and will test the material extensively. I had little luck with the polymax PC. Unfortunately the printing parts (MK3 extruder) broke apart after a few months.
c80f0f1006