Massive MEG pdf and Naudin quote

203 views

Skip to first unread message

Paul Lowrance

unread,

May 7, 2007, 3:11:32 PM5/7/07

to Energy Mover

Hi,

I just uploaded a massive MEG pdf file, 6 MB. It's an accumulation of MEG
information, including some great Naudin recommendations.

http://groups.google.com/group/energymover/web/meg.pdf

Also here's an important post by Naudin -->

-------
Dear MEG explorers,

For a successfull replication of the MEG, I recommend you to use a non linear
load ( but a non inductive and a non capacitive load ) :

- a "conditionned" RLoad (100 Kohms, non inductive carbon, 5Watts) (
http://jnaudin.free.fr/htmlnegres.htm )

- or a MOV (Metal Oxide Varistor) (
http://www.chipcenter.com/eexpert/akruger/akruger032.html )

is REQUIRED for getting the output datas that I have measured with my MEG.

You may put this non linear component in serie with a linear component ( a pure
resistive linear load ) for measuring the I/O.

I give you a very important tip about the MEG design :

ALL the B-field lines of the magnet MUST BE fully absorbed by the core, so, if
you use a Teslameter and you try to measure the magnetic field around the core,
you will not be able to detect any magnetic field, this is the key for a
successfull replication. In all other cases, you build a common step up
transformer ( with about 70% of efficiency ).....

You will find all the data with the wires size and components references about
my Meg device at : http://jnaudin.free.fr/html/megv21.htm

I have used stacked ferrite magnets :

Magnets : Ferrite Barium 40 x 25 x 10 mm ( anisotrop )

Energy produced ( BxH ) max : 29.5 kJ/m^3 - 3.7 MGOe
Remanence ( Br) : 400 mT - 4000 G
Coercitivity ( T=20?C ) :
bHc : 160 kA/m - 2000 Oe
jHc : 165 kA/m - 2050 Oe
Permeability : 1.1 mT/(kA/m)
Temp. coef. -0.20%
Max operating temp. : 200 ?C
Density : 4.9 g/cm^3
Curie point : 450 ?C

PLEASE, read carefully the main MEG paper from Tom Bearden :

The Motionless Electromagnetic Generator:Extracting Energy from a Permanent
Magnet with Energy-Replenishingfrom the Active Vacuum, a PDF document (69pages
1,29 MB), explanations and test results by T.E. Bearden

You may download it at : http://www.help4all.de/energy/MEGpaper.pdf
or also at :
http://www.aw-verlag.ch/Others/Bearden%20-%20MotionlessElectromagneticGenerator.pdf

See also : Status report on the Motionless Electromagnetic Generator by Tom
Bearden http://www.cheniere.org/megstatus.htm

Don't forget that the results published in my web site are the result of an
attempt of a private and a fully independent replication of the Bearden's MEG.
The diagrams published in my web site are NOT the original MEG diagrams being
tested by the Bearden's teamwork or by some accredited labs.

On January 2001, I have decided to stop the publishing of the results on my web
site about my MEG because the MEG is in a final patent pending phase by the
Bearden Teamwork and it will be soon granted.

Good experiments and good luck during your replication,

Best Regards
Jean-Louis Naudin
Email: JNaud...@aol.com

MEG:
http://jnaudin.free.fr/meg/megv21.htm
http://jnaudin.free.fr/meg/megv2.htm
http://jnaudin.free.fr/meg/megv1.htm
http://jnaudin.free.fr/html/meg.htm
http://jnaudin.free.fr/meg/megdiag.htm

Method for "conditioning" a carbon resistor by JL Naudin:
http://jnaudin.free.fr/meg/negres.htm
-------