SNMP
14 views
Skip to first unread message
Mauricio Tavares
Apr 6, 2020, 11:14:29 AM4/6/20
to emulab...@googlegroups.com
For the SNMP setup mentioned in https://gitlab.flux.utah.edu/emulab/emulab-devel/-/wikis/install/Initial%20Switch%20Setup#login-pane, which versions of SNMP are supported? I could not find an option to specify it.
Mike Hibler
Apr 6, 2020, 11:39:02 AM4/6/20
to emulab...@googlegroups.com
We pretty much assume SNMPv2c.
We have always used a private subnet (VLAN) for our management network, so
the community-based authentication is fine. I am pretty sure we use a couple
of features from version 2 (e.g., 64-bit counters) so version 1 would not work.
Note that for many of the newer switch types we manage, we don't even use SNMP.
> --
> You received this message because you are subscribed to the Google Groups
> "emulab-admins" group.
> To unsubscribe from this group and stop receiving emails from it, send an email
> to emulab-admin...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/
> emulab-admins/
> CAHEKYV561h3_xWi1Ez6XEt1rFD8dG%3D2sdX9%3DuYKjgtfr-pkS6g%40mail.gmail.com.
We have always used a private subnet (VLAN) for our management network, so
the community-based authentication is fine. I am pretty sure we use a couple
of features from version 2 (e.g., 64-bit counters) so version 1 would not work.
Note that for many of the newer switch types we manage, we don't even use SNMP.
> You received this message because you are subscribed to the Google Groups
> "emulab-admins" group.
> To unsubscribe from this group and stop receiving emails from it, send an email
> to emulab-admin...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/
> emulab-admins/
> CAHEKYV561h3_xWi1Ez6XEt1rFD8dG%3D2sdX9%3DuYKjgtfr-pkS6g%40mail.gmail.com.
Mauricio Tavares
Apr 6, 2020, 11:47:06 AM4/6/20
to emulab...@googlegroups.com
On Mon, Apr 6, 2020 at 11:39 AM Mike Hibler <mi...@flux.utah.edu> wrote:
>
> We pretty much assume SNMPv2c.
>
> We have always used a private subnet (VLAN) for our management network, so
> the community-based authentication is fine. I am pretty sure we use a couple
> of features from version 2 (e.g., 64-bit counters) so version 1 would not work.
>
Understood. I was thinking on v3 but it is all good; I now know
>
> We pretty much assume SNMPv2c.
>
> We have always used a private subnet (VLAN) for our management network, so
> the community-based authentication is fine. I am pretty sure we use a couple
> of features from version 2 (e.g., 64-bit counters) so version 1 would not work.
>
what I am dealing with.
> Note that for many of the newer switch types we manage, we don't even use SNMP.
>
not seem to specify the protocol.
> On Mon, Apr 06, 2020 at 11:14:16AM -0400, Mauricio Tavares wrote:
> > For the SNMP setup mentioned in https://gitlab.flux.utah.edu/emulab/
> > emulab-devel/-/wikis/install/Initial%20Switch%20Setup#login-pane, which
> > versions of SNMP are supported? I could not find an option to specify it.
> >
> > --
> > You received this message because you are subscribed to the Google Groups
> > "emulab-admins" group.
> > To unsubscribe from this group and stop receiving emails from it, send an email
> > to emulab-admin...@googlegroups.com.
> > To view this discussion on the web visit https://groups.google.com/d/msgid/
> > emulab-admins/
> > CAHEKYV561h3_xWi1Ez6XEt1rFD8dG%3D2sdX9%3DuYKjgtfr-pkS6g%40mail.gmail.com.
>
> --
> You received this message because you are subscribed to the Google Groups "emulab-admins" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to emulab-admin...@googlegroups.com.
Reply all
Reply to author
Forward
0 new messages