enigmo pri loadlin, X Window

4 views

Skip to first unread message

Cindy McKee

unread,

Jan 23, 2009, 5:29:33 PM1/23/09

to eLiberaProgramaro

Evidente, mi parolas tro multe. Mi kopias kaj sendas suban helpopeton al la veraj spertuloj. Eble vi povas solvi la enigmon! Kaj nun mi iras ensaluti en ipernity por doni al li ĉiu tiun ligilon. Jes, la ligilon al la hejmo de la spertuloj!

Saluton Cindy,

Pardonu ke mi ĝenas vin sed ĉar vi estas spertulino pri Libera Programado kaj Linukso eble vi povos helpi min pri la sekva problemo.

Rilatas al la metodo uzi Loadlin por lanĉi Linukson sur FAT32 komputilo http://thisal1.freehostia.com/dsl/index.html#loadlin

(parto de la retejo en Esperanto http://dsl.inf.hu/)

Eble vi tuj vidos la problemon. Mi jam mizerumas pri tio dum tagoj...

Jen la priskribo de la problemo en la angla ĉar mi unue petis helpon al anglalingvanoj sed ili ne respondas/trovas.

On my old laptop when I use DSL from the liveCD the X gui works fine,

but when I use the loadlin method (www.damnsmalllinŭ.org/wiki/index.php/Loadlin_Install)

X gives only an empty screen with the error:

"XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0""

" after 0 requests (0 known processed) with 0 events remaining."

On my other desktop computer Pentium 130 Win95 the loadlin method works fine.

Had somebody got a similar problem?

Any Ideas?

Is there a log file for the default XVesa (like the /var/log/XFree86.0.log for XFree86)

? Where is it?

Thank you for your help.

The laptop is a Compaq Armada 7770DMT Pentium 233 Win98

SPECIFICATIONS:

Pentium/233 MMX, 512Kb of pipeline-burst cache, 32Mb of EDO RAM, 3.2Gb EIDE removable hard disk, Compaq 20-speed CD-ROM drive, 2Mb S3 Aurora 64V+ graphics card, 12.1in SVGA TFT screen, 16-bit ESS 1878 audio, integrated stereo speakers and microphone, internal 33.6K modem,one Type III or two Type II PC Card slots, 4Mbits/sec infrared port, lithium ion battery. Windows 95. Dimensions: 320 x 240 x 58mm (W x D x H). Weight: 3.58kg.

I tried different versions of DSL 4.2.5, 4.4.10

I tried with different boot arguments

I also tried to use XFree86.

when booting from the liveCD the cmdline is:

ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt24.gz nomce noapic quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linŭ24

with this option.txt file for loadlin (in config.sys I have : shell=c:\loadlin.exe @c:\options.txt)

linŭ24

ramdisk_size=100000

init=/etc/init

lang=us

apm=power-off

vga=791

initrd=minirt24.gz

nomce

noapic

nodhcp

quiet

root=/dev/hda1

frugal

BOOT_IMAGE=knoppix

it is:

root=/dev/hda1 rw apm=power-off minimal ramdisk_size=100000 init=/etc/init lang=us nousb noapic nomce nodhcp quiet frugal BOOT_IMAGE=knoppix BOOT_IMAGE=linŭ24

to put the missing "vga=791" I tried c:\ loadlin @c:\options.txt vga=791

but even with that it does not appear in the cmdline...

with "c:\ loadlin @c:\options.txt vga=791 2" DSL starts in runlevel 2, so it seems to take these arguments after the options.txt file...

.xserverrc is:

exec /usr/bin/X11/Xvesa -2button -mouse /dev/psaŭ -screen 640x480x4 -shadow -nolisten tcp -I &>/dev/null

dmesg gives:

<4>Linŭ version 2.4.31 (root@box) (gcc version 2.95.4 20011002 (Debian prerelease)) #6 SMP Fri Oct 21 15:15:54 EDT 2005

<6>BIOS-provided physical RAM map:

<4> BIOS-e801: 0000000000000000 - 000000000009f000 (usable)

<4> BIOS-e801: 0000000000100000 - 0000000005000000 (usable)

<5>0MB HIGHMEM available.

<5>80MB LOWMEM available.

<4>On node 0 totalpages: 20480

<4>zone(0): 4096 pages.

<4>zone(1): 16384 pages.

<4>zone(2): 0 pages.

<6>DMI not present.

<3>ACPI: Unable to locate RSDP

<4>Kernel command line: ramdisk_size=100000 init=/etc/init lang=us apm=power-off nomce noapic nodhcp quiet root=/dev/hda1 rw frugal BOOT_IMAGE=knoppix BOOT_IMAGE=linŭ24

<4>No local APIC present or hardware disabled

<6>Initializing CPU#0

<4>Detected 233.226 MHz processor.

<4>Console: colour VGA+ 80x25

<4>Calibrating delay loop... 465.30 BogoMIPS

<6>Memory: 77700k/81920k available (1386k kernel code, 3832k reserved, 567k data, 144k init, 0k highmem)

<6>Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)

<6>Inode cache hash table entries: 8192 (order: 4, 65536 bytes)

<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)

<6>Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)

<4>Page-cache hash table entries: 32768 (order: 5, 131072 bytes)

<5>Intel Pentium with F0 0F bug - workaround enabled.

<7>CPU: After generic, caps: 008001bf 00000000 00000000 00000000

<7>CPU: Common caps: 008001bf 00000000 00000000 00000000

<6>Checking 'hlt' instruction... OK.

<6>Checking for popad bug... OK.

<4>POSIX conformance testing by UNIFIX

<4>mtrr: v1.40 (20010327) Richard Gooch (rgo...@atnf.csiro.au)

<4>mtrr: detected mtrr type: none

<7>CPU: After generic, caps: 008001bf 00000000 00000000 00000000

<7>CPU: Common caps: 008001bf 00000000 00000000 00000000

<4>CPU0: Intel Mobile Pentium MMX stepping 01

<4>per-CPU timeslice cutoff: 159.61 usecs.

<5>SMP motherboard not detected.

<5>Local APIC not detected. Using dummy APIC emulation.

<4>Waiting on wait_init_idle (map = 0x0)

<4>All processors have done init_idle

<6>ACPI: Subsystem revision 20040326

<6>ACPI: Interpreter disabled.

<6>PCI: PCI BIOS revision 2.10 entry at 0xf740d, last bus=0

<6>PCI: Using configuration type 1

<6>PCI: Probing PCI hardware

<4>PCI: Probing PCI hardware (bus 00)

<6>PCI: Ignoring BAR0-3 of IDE controller 00:0e.1

<6>PCI: Ignoring BAR0-3 of IDE controller 00:0f.1

<6>isapnp: Scanning for PnP cards...

<6>isapnp: No Plug & Play device found

<6>Linŭ NET4.0 for Linŭ 2.4

<6>Based upon Swansea University Computer Society NET3.039

<4>Initializing RT netlink socket

<4>Starting kswapd

<5>VFS: Disk quotas vdquot_6.5.1

<4>pty: 256 Unix98 ptys configured

<6>Floppy drive(s): fd0 is 1.44M

<6>FDC 0 is a post-1991 82077

<4>RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize

<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4

<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=x

<6>TRIFLEX: IDE controller at PCI slot 00:0e.1

<6>TRIFLEX: chipset revision 3

<6>TRIFLEX: not 100% native mode: will probe irqs later

<6> ide0: BM-DMA at 0xb140-0xb147, BIOS settings: hda:DMA, hdb:DMA

<6>TRIFLEX: IDE controller at PCI slot 00:0f.1

<6>TRIFLEX: chipset revision 3

<6>TRIFLEX: not 100% native mode: will probe irqs later

<7>PCI: Setting latency timer of device 00:0f.1 to 64

<6> ide1: BM-DMA at 0xb158-0xb15f, BIOS settings: hdc:pio, hdd:pio

<4>hda: IBM-DTCA-23240, ATA DISK drive

<4>hdb: COMPAQ CRD-S311, ATAPI CD/DVD-ROM drive

<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

<4>hda: attached ide-disk driver.

<6>hda: 6354432 sectors (3253 MB) w/468KiB Cache, CHS=788/128/63

<6>Partition check:

<6> hda: hda1 hda3

<4>ide: late registration of driver.

<6>SCSI subsystem driver Revision: 1.00

<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

<6>Initializing Cryptographic API

<6>NET4: Linŭ TCP/IP 1.0 for NET4.0

<6>IP Protocols: ICMP, UDP, TCP, IGMP

<6>IP: routing cache hash table of 512 buckets, 4Kbytes

<6>TCP: Hash tables configured (established 8192 bind 8192)

<6>NET4: Unix domain sockets 1.0/SMP for Linŭ NET4.0.

<5>RAMDISK: Compressed image found at block 0

<6>Freeing initrd memory: 292k freed

<4>VFS: Mounted root (ext2 filesystem).

<4>hdb: attached ide-scsi driver.

<6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices

<4> Vendor: COMPAQ Model: CRD-S311 Rev: 2.18

<4> Type: CD-ROM ANSI SCSI revision: 02

<4>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0

<4>sr0: scsi3-mmc drive: 8x/20x xa/form2 tray

<6>Uniform CD-ROM driver Revision: 3.12

<6>usb.c: registered new driver usbdevfs

<6>usb.c: registered new driver hub

<6>ehci_hcd 00:08.2: NEC Corporation USB 2.0

<6>ehci_hcd 00:08.2: irq 11, pci mem c5829000

<6>usb.c: new USB bus registered, assigned bus number 1

<6>ehci_hcd 00:08.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Dec-29/2.4

<6>hub.c: USB hub found

<6>hub.c: 5 ports detected

<6>usb-uhci.c: $Revision: 1.275 $ time 14:05:13 Aug 18 2005

<6>usb-uhci.c: High bandwidth mode enabled

<6>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver

<6>usb-ohci.c: USB OHCI at me

--
Cindy McKee
Cindio

Reply all

Reply to author

Forward

0 new messages