Re: Digest for electricvlsi@googlegroups.com - 3 updates in 1 topic

[Alexandre Rusev]

May be some university may be interested in supporting this project?

I know a few guys ehusiasts of this idea!


English forum:
https://3.14.by/forum/viewforum.php?f=11

URL-s  (in Russian)

https://3.14.by/ru/read/making-microchips-at-home
https://geektimes.ru/post/258062/

Their title "Делаем микросхемы дома" means  "Making chips at home"

I am looking onto FreePDK45 and NanGate cells for FreePDK support in Electric, still no big success

Anyone in this forum can contact NanGate for research lisence and request cell library download.

(I did that a week ago and now I have their sample cell library)

I notified them on our potential interest to add support for FreePDK in Electric along, possibly with their cell library.

On Tue, May 16, 2017 at 9:31 AM, <electr...@googlegroups.com> wrote:

electr...@googlegroups.com

Google Groups

Topic digest
View all topics

• Fully open source SoC - 3 Updates

Fully open source SoC

Justin Spencer <justinm...@gmail.com>: May 15 06:31AM -0700 Dear Mr. Carvalho,   Good day. I would also like to help with this endeavor in any way possible. Please contact me if you're interested in collaborating.   Thank you.   Regards, Justin   On Friday, 24 March 2017 00:33:22 UTC+8, Maurício Carvalho wrote:

Travis Ayres <tra...@gmail.com>: May 15 10:25AM -0700 The NDAs for the foundaries will stop you cold as soon as you go below about 180nm.   An option would be to use laser direct writing and expose and dope the wafers yourself. You could theoretically do this in a clean room you setup in a garage, but you'd still probably need 40k of equipment and material, at the very low end. Disposal of toxic chemicals in an appropriate way is another hurdle. All of this, and you might be able to get an ancient process out the door. But it would be fun...

Patryk S <vido...@gmail.com>: May 15 11:39PM +0200 https://opencores.org https://en.wikipedia.org/wiki/OpenCores

Back to top

You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page. To unsubscribe from this group and stop receiving emails from it send an email to electricvlsi+unsubscribe@googlegroups.com.

[Travis Ayres]

It looks like that forum is dead - no activity for many years. 

--
You received this message because you are subscribed to the Google Groups "Electric VLSI Editor" group.
To unsubscribe from this group and stop receiving emails from it, send an email to electricvlsi+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.