Ajuda Elastix interligando com PABX INTELBRAS via E1

324 views
Skip to first unread message

Alexandre Trevizoli

unread,
Nov 30, 2015, 3:31:23 PM11/30/15
to elasti...@googlegroups.com

Pessoal alguém será que pode me dar uma dica, estamos interligando um elastix com intelbras via E1 (MFCR2) e o elastix com a EMBRATEL via SIP, acontece que algumas ligações caem logo após o ANSWER, percebi que são algumas ligações que demoram mais para dar o sinal de answer na embratel.

Alguém já passou por isso? tem algum padrão de MFCR2 para interligar?

 

Muito Obrigado!

 

 

Rafael Tavares

unread,
Nov 30, 2015, 3:37:42 PM11/30/15
to elasti...@googlegroups.com
Antes de tudo cria um ramal sip no elastix e configura em um softphone e testa se a conexão SIP com a Embratel esta ok, e se não acontecer mais nenhum problema ai você parte para a Interligação com a Intelbras.

--

---
Você recebeu essa mensagem porque está inscrito no grupo "ElastixBrasil" dos Grupos do Google.
Para cancelar inscrição nesse grupo e parar de receber e-mails dele, envie um e-mail para elastixbrasi...@googlegroups.com.
Para postar nesse grupo, envie um e-mail para elasti...@googlegroups.com.
Acesse esse grupo em http://groups.google.com/group/elastixbrasil.
Para mais opções, acesse https://groups.google.com/d/optout.

Alexandre Trevizoli

unread,
Nov 30, 2015, 4:17:59 PM11/30/15
to elasti...@googlegroups.com

Rafael o SIP está normal consigo fazer a ligação....

e a interligação em teoria está OK, apenas alguns números discados da Intelbras que passa pela E1 e vai em direção a embratel passando pelo PABX IP, a ligação cai logo que o SIP manda o ANSWERED;

 

Veja esse caso: o ANI=34565205 é o ramal 5205, que eu não sei porque vem para mim tudo....

Se alguém tiver uma LUZ eu agradeço muito.....e 90% dos números funcionam normal, são apenas alguns que dão isso e você pode discar 100x para esses números que acontece o mesmo problema, para os outros você pode discar 100x que dá sempre certo...isso que é o mais estranho....como não entendo de PABX ANALÓGICO eu não sei se há algum parâmetro lá que causa este problema....

 

system.conf

span=1,0,0,cas,hdb3

echocanceller=oslec,1-15,17-31

cas=1-15:1101

cas=17-31:1101

span=2,0,0,cas,hdb3

echocanceller=oslec,32-46,48-62

cas=32-46:1101

cas=48-62:1101

# Global data

loadzone        = br

defaultzone     = br

 

chan_dahdi.conf

 

group=0

context=from-internal

signalling=mfcr2

mfcr2_variant=br

mfcr2_immediate_accept=no

mfcr2_get_ani_first=no

mfcr2_max_ani=20

mfcr2_max_dnis=20

mfcr2_category=national_subscriber

mfcr2_mfback_timeout=-1

mfcr2_metering_pulse_timeout=-1

mfcr2_forced_release=yes

; choose only yes or no

mfcr2_allow_collect_calls=yes

mfcr2_double_answer=no

;mfcr2_charge_calls=yes

mfcr2_logdir=span1

mfcr2_logging=all

mfcr2_call_files=yes

;loglevel=error,warning,debug,notice,cas,mf

channel => 1-15,17-31

channel => 32-46,48-62

group=63

context=default

 

-----------------------------

log do CLI

 

 

New MFC/R2 call detected on chan 1.

MFC/R2 call offered on chan 1. ANI = 34565205, DNIS = 21024905, Category = National Subscriber

MFC/R2 call has been accepted on backward channel 1

    -- Executing [21024905@from-internal:1] Macro("DAHDI/1-1", "user-callerid,LIMIT,EXTERNAL,") in new stack

    -- Executing [s@macro-user-callerid:1] Set("DAHDI/1-1", "TOUCH_MONITOR=1448917391.4") in new stack

    -- Executing [s@macro-user-callerid:2] Set("DAHDI/1-1", "AMPUSER=34565205") in new stack

    -- Executing [s@macro-user-callerid:3] GotoIf("DAHDI/1-1", "0?report") in new stack

    -- Executing [s@macro-user-callerid:4] ExecIf("DAHDI/1-1", "1?Set(REALCALLERIDNUM=34565205)") in new stack

    -- Executing [s@macro-user-callerid:5] Set("DAHDI/1-1", "AMPUSER=") in new stack

    -- Executing [s@macro-user-callerid:6] GotoIf("DAHDI/1-1", "0?limit") in new stack

    -- Executing [s@macro-user-callerid:7] Set("DAHDI/1-1", "AMPUSERCIDNAME=") in new stack

    -- Executing [s@macro-user-callerid:8] GotoIf("DAHDI/1-1", "1?report") in new stack

    -- Goto (macro-user-callerid,s,15)

    -- Executing [s@macro-user-callerid:15] GotoIf("DAHDI/1-1", "1?continue") in new stack

    -- Goto (macro-user-callerid,s,28)

    -- Executing [s@macro-user-callerid:28] Set("DAHDI/1-1", "CALLERID(number)=34565205") in new stack

    -- Executing [s@macro-user-callerid:29] Set("DAHDI/1-1", "CALLERID(name)=34565205") in new stack

    -- Executing [s@macro-user-callerid:30] Set("DAHDI/1-1", "CDR(cnum)=34565205") in new stack

    -- Executing [s@macro-user-callerid:31] Set("DAHDI/1-1", "CDR(cnam)=34565205") in new stack

    -- Executing [s@macro-user-callerid:32] Set("DAHDI/1-1", "CHANNEL(language)=en") in new stack

    -- Executing [21024905@from-internal:2] Set("DAHDI/1-1", "MOHCLASS=default") in new stack

    -- Executing [21024905@from-internal:3] Set("DAHDI/1-1", "_NODEST=") in new stack

    -- Executing [21024905@from-internal:4] Gosub("DAHDI/1-1", "sub-record-check,s,1(out,21024905,)") in new stack

    -- Executing [s@sub-record-check:1] Set("DAHDI/1-1", "REC_POLICY_MODE_SAVE=") in new stack

    -- Executing [s@sub-record-check:2] GotoIf("DAHDI/1-1", "1?check") in new stack

    -- Goto (sub-record-check,s,7)

    -- Executing [s@sub-record-check:7] Set("DAHDI/1-1", "__MON_FMT=wav") in new stack

    -- Executing [s@sub-record-check:8] GotoIf("DAHDI/1-1", "1?next") in new stack

    -- Goto (sub-record-check,s,11)

    -- Executing [s@sub-record-check:11] ExecIf("DAHDI/1-1", "0?Return()") in new stack

    -- Executing [s@sub-record-check:12] ExecIf("DAHDI/1-1", "0?Set(__REC_POLICY_MODE=)") in new stack

    -- Executing [s@sub-record-check:13] GotoIf("DAHDI/1-1", "0?out,1") in new stack

    -- Executing [s@sub-record-check:14] Set("DAHDI/1-1", "__REC_STATUS=INITIALIZED") in new stack

    -- Executing [s@sub-record-check:15] Set("DAHDI/1-1", "NOW=1448917391") in new stack

    -- Executing [s@sub-record-check:16] Set("DAHDI/1-1", "__DAY=30") in new stack

    -- Executing [s@sub-record-check:17] Set("DAHDI/1-1", "__MONTH=11") in new stack

    -- Executing [s@sub-record-check:18] Set("DAHDI/1-1", "__YEAR=2015") in new stack

    -- Executing [s@sub-record-check:19] Set("DAHDI/1-1", "__TIMESTR=20151130-190311") in new stack

    -- Executing [s@sub-record-check:20] Set("DAHDI/1-1", "__FROMEXTEN=34565205") in new stack

    -- Executing [s@sub-record-check:21] Set("DAHDI/1-1", "__CALLFILENAME=out-21024905-34565205-20151130-190311-1448917391.4") in new stack

    -- Executing [s@sub-record-check:22] Goto("DAHDI/1-1", "out,1") in new stack

    -- Goto (sub-record-check,out,1)

    -- Executing [out@sub-record-check:1] ExecIf("DAHDI/1-1", "1?Set(__REC_POLICY_MODE=)") in new stack

    -- Executing [out@sub-record-check:2] GosubIf("DAHDI/1-1", "0?record,1(exten,21024905,34565205)") in new stack

    -- Executing [out@sub-record-check:3] Return("DAHDI/1-1", "") in new stack

    -- Executing [21024905@from-internal:5] Macro("DAHDI/1-1", "dialout-trunk,2,21024905,,off") in new stack

    -- Executing [s@macro-dialout-trunk:1] Set("DAHDI/1-1", "DIAL_TRUNK=2") in new stack

    -- Executing [s@macro-dialout-trunk:2] GosubIf("DAHDI/1-1", "0?sub-pincheck,s,1()") in new stack

    -- Executing [s@macro-dialout-trunk:3] GotoIf("DAHDI/1-1", "0?disabletrunk,1") in new stack

    -- Executing [s@macro-dialout-trunk:4] Set("DAHDI/1-1", "DIAL_NUMBER=21024905") in new stack

    -- Executing [s@macro-dialout-trunk:5] Set("DAHDI/1-1", "DIAL_TRUNK_OPTIONS=tr") in new stack

    -- Executing [s@macro-dialout-trunk:6] Set("DAHDI/1-1", "OUTBOUND_GROUP=OUT_2") in new stack

    -- Executing [s@macro-dialout-trunk:7] GotoIf("DAHDI/1-1", "1?nomax") in new stack

    -- Goto (macro-dialout-trunk,s,9)

    -- Executing [s@macro-dialout-trunk:9] GotoIf("DAHDI/1-1", "0?skipoutcid") in new stack

    -- Executing [s@macro-dialout-trunk:10] Set("DAHDI/1-1", "DIAL_TRUNK_OPTIONS=") in new stack

    -- Executing [s@macro-dialout-trunk:11] Macro("DAHDI/1-1", "outbound-callerid,2") in new stack

    -- Executing [s@macro-outbound-callerid:1] ExecIf("DAHDI/1-1", "0?Set(CALLERPRES()=)") in new stack

    -- Executing [s@macro-outbound-callerid:2] ExecIf("DAHDI/1-1", "0?Set(REALCALLERIDNUM=34565205)") in new stack

    -- Executing [s@macro-outbound-callerid:3] GotoIf("DAHDI/1-1", "1?normcid") in new stack

    -- Goto (macro-outbound-callerid,s,6)

    -- Executing [s@macro-outbound-callerid:6] Set("DAHDI/1-1", "USEROUTCID=") in new stack

    -- Executing [s@macro-outbound-callerid:7] Set("DAHDI/1-1", "EMERGENCYCID=") in new stack

    -- Executing [s@macro-outbound-callerid:8] Set("DAHDI/1-1", "TRUNKOUTCID=1634568800") in new stack

    -- Executing [s@macro-outbound-callerid:9] GotoIf("DAHDI/1-1", "1?trunkcid") in new stack

    -- Goto (macro-outbound-callerid,s,14)

    -- Executing [s@macro-outbound-callerid:14] ExecIf("DAHDI/1-1", "1?Set(CALLERID(all)=1634568800)") in new stack

    -- Executing [s@macro-outbound-callerid:15] ExecIf("DAHDI/1-1", "0?Set(CALLERID(all)=)") in new stack

    -- Executing [s@macro-outbound-callerid:16] ExecIf("DAHDI/1-1", "0?Set(CALLERID(all)=)") in new stack

    -- Executing [s@macro-outbound-callerid:17] ExecIf("DAHDI/1-1", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack

    -- Executing [s@macro-outbound-callerid:18] Set("DAHDI/1-1", "CDR(outbound_cnum)=1634568800") in new stack

    -- Executing [s@macro-outbound-callerid:19] Set("DAHDI/1-1", "CDR(outbound_cnam)=") in new stack

    -- Executing [s@macro-dialout-trunk:12] GosubIf("DAHDI/1-1", "1?sub-flp-2,s,1()") in new stack

    -- Executing [s@sub-flp-2:1] ExecIf("DAHDI/1-1", "0?Set(TARGET_FLP_2=02121024905)") in new stack

    -- Executing [s@sub-flp-2:2] GotoIf("DAHDI/1-1", "0?match") in new stack

    -- Executing [s@sub-flp-2:3] ExecIf("DAHDI/1-1", "0?Return()") in new stack

    -- Executing [s@sub-flp-2:4] Return("DAHDI/1-1", "") in new stack

    -- Executing [s@macro-dialout-trunk:13] Set("DAHDI/1-1", "OUTNUM=21024905") in new stack

    -- Executing [s@macro-dialout-trunk:14] Set("DAHDI/1-1", "custom=SIP/embratel") in new stack

    -- Executing [s@macro-dialout-trunk:15] ExecIf("DAHDI/1-1", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default))") in new stack

    -- Executing [s@macro-dialout-trunk:16] ExecIf("DAHDI/1-1", "0?Set(DIAL_TRUNK_OPTIONS=M(confirm))") in new stack

    -- Executing [s@macro-dialout-trunk:17] Macro("DAHDI/1-1", "dialout-trunk-predial-hook,") in new stack

    -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("DAHDI/1-1", "") in new stack

    -- Executing [s@macro-dialout-trunk:18] GotoIf("DAHDI/1-1", "0?bypass,1") in new stack

    -- Executing [s@macro-dialout-trunk:19] ExecIf("DAHDI/1-1", "0?Set(CONNECTEDLINE(num,i)=21024905)") in new stack

    -- Executing [s@macro-dialout-trunk:20] ExecIf("DAHDI/1-1", "0?Set(CONNECTEDLINE(name,i)=CID:1634568800)") in new stack

    -- Executing [s@macro-dialout-trunk:21] GotoIf("DAHDI/1-1", "0?customtrunk") in new stack

    -- Executing [s@macro-dialout-trunk:22] Dial("DAHDI/1-1", "SIP/embratel/21024905,300,") in new stack

  == Using SIP RTP TOS bits 184

  == Using SIP RTP CoS mark 5

    -- Called SIP/embratel/21024905

    -- SIP/embratel-00000003 is ringing

    -- SIP/embratel-00000003 is making progress passing it to DAHDI/1-1

    -- SIP/embratel-00000003 answered DAHDI/1-1

Chan 1 - Far end disconnected. Reason: Normal Clearing

MFC/R2 call disconnected on channel 1

 

 

Log da CALL

---------------------------------

[19:02:32:734] [Thread: 139838313761088] [Chan 1] - Call started at Mon Nov 30 19:02:32 2015 on chan 1 [openr2 version 1.3.3, revision (release)]

[19:02:32:734] [Thread: 139838313761088] [Chan 1] - Initialized R2 MF detector

[19:02:32:734] [Thread: 139838313761088] [Chan 1] - CAS Tx >> [SEIZE ACK] 0x0C

[19:02:32:734] [Thread: 139838313761088] [Chan 1] - CAS Raw Tx >> 0x0D

[19:02:32:887] [Thread: 139838313761088] [Chan 1] - MF Rx << 2 [ON]

[19:02:32:887] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 0

[19:02:32:887] [Thread: 139838313761088] [Chan 1] - Cannot cancel timer 0

[19:02:32:887] [Thread: 139838313761088] [Chan 1] - Getting DNIS digit 2

[19:02:32:887] [Thread: 139838313761088] [Chan 1] - DNIS so far: 2, expected length: 15

[19:02:32:887] [Thread: 139838313761088] [Chan 1] - Requesting next DNIS with signal 0x31.

[19:02:32:887] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [ON]

[19:02:32:887] [Thread: 139838313761088] [Chan 1] - scheduled timer id 2 (mf_back_cycle)

[19:02:32:987] [Thread: 139838313761088] [Chan 1] - MF Rx << 2 [OFF]

[19:02:32:987] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [OFF]

[19:02:33:127] [Thread: 139838313761088] [Chan 1] - MF Rx << 1 [ON]

[19:02:33:127] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 2

[19:02:33:127] [Thread: 139838313761088] [Chan 1] - timer id 2 found, cancelling it now

[19:02:33:127] [Thread: 139838313761088] [Chan 1] - Getting DNIS digit 1

[19:02:33:127] [Thread: 139838313761088] [Chan 1] - DNIS so far: 21, expected length: 15

[19:02:33:127] [Thread: 139838313761088] [Chan 1] - Requesting next DNIS with signal 0x31.

[19:02:33:127] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [ON]

[19:02:33:127] [Thread: 139838313761088] [Chan 1] - scheduled timer id 3 (mf_back_cycle)

[19:02:33:227] [Thread: 139838313761088] [Chan 1] - MF Rx << 1 [OFF]

[19:02:33:227] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [OFF]

[19:02:33:487] [Thread: 139838313761088] [Chan 1] - MF Rx << 0 [ON]

[19:02:33:487] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 3

[19:02:33:487] [Thread: 139838313761088] [Chan 1] - timer id 3 found, cancelling it now

[19:02:33:487] [Thread: 139838313761088] [Chan 1] - Getting DNIS digit 0

[19:02:33:487] [Thread: 139838313761088] [Chan 1] - DNIS so far: 210, expected length: 15

[19:02:33:487] [Thread: 139838313761088] [Chan 1] - Requesting next DNIS with signal 0x31.

[19:02:33:487] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [ON]

[19:02:33:487] [Thread: 139838313761088] [Chan 1] - scheduled timer id 4 (mf_back_cycle)

[19:02:33:587] [Thread: 139838313761088] [Chan 1] - MF Rx << 0 [OFF]

[19:02:33:587] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [OFF]

[19:02:33:907] [Thread: 139838313761088] [Chan 1] - MF Rx << 2 [ON]

[19:02:33:907] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 4

[19:02:33:907] [Thread: 139838313761088] [Chan 1] - timer id 4 found, cancelling it now

[19:02:33:907] [Thread: 139838313761088] [Chan 1] - Getting DNIS digit 2

[19:02:33:907] [Thread: 139838313761088] [Chan 1] - DNIS so far: 2102, expected length: 15

[19:02:33:907] [Thread: 139838313761088] [Chan 1] - Requesting next DNIS with signal 0x31.

[19:02:33:907] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [ON]

[19:02:33:907] [Thread: 139838313761088] [Chan 1] - scheduled timer id 5 (mf_back_cycle)

[19:02:34:027] [Thread: 139838313761088] [Chan 1] - MF Rx << 2 [OFF]

[19:02:34:027] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [OFF]

[19:02:34:687] [Thread: 139838313761088] [Chan 1] - MF Rx << 4 [ON]

[19:02:34:687] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 5

[19:02:34:687] [Thread: 139838313761088] [Chan 1] - timer id 5 found, cancelling it now

[19:02:34:687] [Thread: 139838313761088] [Chan 1] - Getting DNIS digit 4

[19:02:34:687] [Thread: 139838313761088] [Chan 1] - DNIS so far: 21024, expected length: 15

[19:02:34:687] [Thread: 139838313761088] [Chan 1] - Requesting next DNIS with signal 0x31.

[19:02:34:687] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [ON]

[19:02:34:687] [Thread: 139838313761088] [Chan 1] - scheduled timer id 6 (mf_back_cycle)

[19:02:34:787] [Thread: 139838313761088] [Chan 1] - MF Rx << 4 [OFF]

[19:02:34:787] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [OFF]

[19:02:35:027] [Thread: 139838313761088] [Chan 1] - MF Rx << 9 [ON]

[19:02:35:027] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 6

[19:02:35:027] [Thread: 139838313761088] [Chan 1] - timer id 6 found, cancelling it now

[19:02:35:027] [Thread: 139838313761088] [Chan 1] - Getting DNIS digit 9

[19:02:35:027] [Thread: 139838313761088] [Chan 1] - DNIS so far: 210249, expected length: 15

[19:02:35:027] [Thread: 139838313761088] [Chan 1] - Requesting next DNIS with signal 0x31.

[19:02:35:027] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [ON]

[19:02:35:027] [Thread: 139838313761088] [Chan 1] - scheduled timer id 7 (mf_back_cycle)

[19:02:35:107] [Thread: 139838313761088] [Chan 1] - MF Rx << 9 [OFF]

[19:02:35:107] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [OFF]

[19:02:35:367] [Thread: 139838313761088] [Chan 1] - MF Rx << 0 [ON]

[19:02:35:367] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 7

[19:02:35:367] [Thread: 139838313761088] [Chan 1] - timer id 7 found, cancelling it now

[19:02:35:367] [Thread: 139838313761088] [Chan 1] - Getting DNIS digit 0

[19:02:35:367] [Thread: 139838313761088] [Chan 1] - DNIS so far: 2102490, expected length: 15

[19:02:35:367] [Thread: 139838313761088] [Chan 1] - Requesting next DNIS with signal 0x31.

[19:02:35:367] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [ON]

[19:02:35:367] [Thread: 139838313761088] [Chan 1] - scheduled timer id 8 (mf_back_cycle)

[19:02:35:487] [Thread: 139838313761088] [Chan 1] - MF Rx << 0 [OFF]

[19:02:35:487] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [OFF]

[19:02:35:687] [Thread: 139838313761088] [Chan 1] - MF Rx << 5 [ON]

[19:02:35:687] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 8

[19:02:35:687] [Thread: 139838313761088] [Chan 1] - timer id 8 found, cancelling it now

[19:02:35:687] [Thread: 139838313761088] [Chan 1] - Getting DNIS digit 5

[19:02:35:687] [Thread: 139838313761088] [Chan 1] - DNIS so far: 21024905, expected length: 15

[19:02:35:687] [Thread: 139838313761088] [Chan 1] - Requesting next DNIS with signal 0x31.

[19:02:35:687] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [ON]

[19:02:35:687] [Thread: 139838313761088] [Chan 1] - scheduled timer id 9 (mf_back_cycle)

[19:02:35:787] [Thread: 139838313761088] [Chan 1] - MF Rx << 5 [OFF]

[19:02:35:787] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [OFF]

[19:02:40:687] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 9

[19:02:40:687] [Thread: 139838313761088] [Chan 1] - timer id 9 found, cancelling it now

[19:02:40:687] [Thread: 139838313761088] [Chan 1] - calling timer 9 (mf_back_cycle) callback

[19:02:40:687] [Thread: 139838313761088] [Chan 1] - MF cycle timed out, no more DNIS

[19:02:40:687] [Thread: 139838313761088] [Chan 1] - scheduled timer id 10 (mf_back_resume_cycle)

[19:02:40:687] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [ON]

[19:02:40:687] [Thread: 139838313761088] [Chan 1] - scheduled timer id 11 (mf_back_cycle)

[19:02:40:847] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 10

[19:02:40:847] [Thread: 139838313761088] [Chan 1] - timer id 10 found, cancelling it now

[19:02:40:847] [Thread: 139838313761088] [Chan 1] - calling timer 10 (mf_back_resume_cycle) callback

[19:02:40:847] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [OFF]

[19:02:40:967] [Thread: 139838313761088] [Chan 1] - MF Rx << 1 [ON]

[19:02:40:967] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 11

[19:02:40:967] [Thread: 139838313761088] [Chan 1] - timer id 11 found, cancelling it now

[19:02:40:967] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [ON]

[19:02:40:967] [Thread: 139838313761088] [Chan 1] - scheduled timer id 12 (mf_back_cycle)

[19:02:41:087] [Thread: 139838313761088] [Chan 1] - MF Rx << 1 [OFF]

[19:02:41:087] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [OFF]

[19:02:41:207] [Thread: 139838313761088] [Chan 1] - MF Rx << 3 [ON]

[19:02:41:207] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 12

[19:02:41:207] [Thread: 139838313761088] [Chan 1] - timer id 12 found, cancelling it now

[19:02:41:207] [Thread: 139838313761088] [Chan 1] - Getting ANI digit 3

[19:02:41:207] [Thread: 139838313761088] [Chan 1] - ANI so far: 3, expected length: 15

[19:02:41:207] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [ON]

[19:02:41:207] [Thread: 139838313761088] [Chan 1] - scheduled timer id 13 (mf_back_cycle)

[19:02:41:307] [Thread: 139838313761088] [Chan 1] - MF Rx << 3 [OFF]

[19:02:41:307] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [OFF]

[19:02:41:427] [Thread: 139838313761088] [Chan 1] - MF Rx << 4 [ON]

[19:02:41:427] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 13

[19:02:41:427] [Thread: 139838313761088] [Chan 1] - timer id 13 found, cancelling it now

[19:02:41:427] [Thread: 139838313761088] [Chan 1] - Getting ANI digit 4

[19:02:41:427] [Thread: 139838313761088] [Chan 1] - ANI so far: 34, expected length: 15

[19:02:41:427] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [ON]

[19:02:41:427] [Thread: 139838313761088] [Chan 1] - scheduled timer id 14 (mf_back_cycle)

[19:02:41:527] [Thread: 139838313761088] [Chan 1] - MF Rx << 4 [OFF]

[19:02:41:527] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [OFF]

[19:02:41:667] [Thread: 139838313761088] [Chan 1] - MF Rx << 5 [ON]

[19:02:41:667] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 14

[19:02:41:667] [Thread: 139838313761088] [Chan 1] - timer id 14 found, cancelling it now

[19:02:41:667] [Thread: 139838313761088] [Chan 1] - Getting ANI digit 5

[19:02:41:667] [Thread: 139838313761088] [Chan 1] - ANI so far: 345, expected length: 15

[19:02:41:667] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [ON]

[19:02:41:667] [Thread: 139838313761088] [Chan 1] - scheduled timer id 15 (mf_back_cycle)

[19:02:41:767] [Thread: 139838313761088] [Chan 1] - MF Rx << 5 [OFF]

[19:02:41:767] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [OFF]

[19:02:41:907] [Thread: 139838313761088] [Chan 1] - MF Rx << 6 [ON]

[19:02:41:907] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 15

[19:02:41:907] [Thread: 139838313761088] [Chan 1] - timer id 15 found, cancelling it now

[19:02:41:907] [Thread: 139838313761088] [Chan 1] - Getting ANI digit 6

[19:02:41:907] [Thread: 139838313761088] [Chan 1] - ANI so far: 3456, expected length: 15

[19:02:41:907] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [ON]

[19:02:41:907] [Thread: 139838313761088] [Chan 1] - scheduled timer id 16 (mf_back_cycle)

[19:02:42:007] [Thread: 139838313761088] [Chan 1] - MF Rx << 6 [OFF]

[19:02:42:007] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [OFF]

[19:02:42:127] [Thread: 139838313761088] [Chan 1] - MF Rx << 5 [ON]

[19:02:42:127] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 16

[19:02:42:127] [Thread: 139838313761088] [Chan 1] - timer id 16 found, cancelling it now

[19:02:42:127] [Thread: 139838313761088] [Chan 1] - Getting ANI digit 5

[19:02:42:127] [Thread: 139838313761088] [Chan 1] - ANI so far: 34565, expected length: 15

[19:02:42:127] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [ON]

[19:02:42:127] [Thread: 139838313761088] [Chan 1] - scheduled timer id 17 (mf_back_cycle)

[19:02:42:227] [Thread: 139838313761088] [Chan 1] - MF Rx << 5 [OFF]

[19:02:42:227] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [OFF]

[19:02:42:367] [Thread: 139838313761088] [Chan 1] - MF Rx << 2 [ON]

[19:02:42:367] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 17

[19:02:42:367] [Thread: 139838313761088] [Chan 1] - timer id 17 found, cancelling it now

[19:02:42:367] [Thread: 139838313761088] [Chan 1] - Getting ANI digit 2

[19:02:42:367] [Thread: 139838313761088] [Chan 1] - ANI so far: 345652, expected length: 15

[19:02:42:367] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [ON]

[19:02:42:367] [Thread: 139838313761088] [Chan 1] - scheduled timer id 18 (mf_back_cycle)

[19:02:42:467] [Thread: 139838313761088] [Chan 1] - MF Rx << 2 [OFF]

[19:02:42:467] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [OFF]

[19:02:42:587] [Thread: 139838313761088] [Chan 1] - MF Rx << 0 [ON]

[19:02:42:587] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 18

[19:02:42:587] [Thread: 139838313761088] [Chan 1] - timer id 18 found, cancelling it now

[19:02:42:587] [Thread: 139838313761088] [Chan 1] - Getting ANI digit 0

[19:02:42:587] [Thread: 139838313761088] [Chan 1] - ANI so far: 3456520, expected length: 15

[19:02:42:587] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [ON]

[19:02:42:587] [Thread: 139838313761088] [Chan 1] - scheduled timer id 19 (mf_back_cycle)

[19:02:42:687] [Thread: 139838313761088] [Chan 1] - MF Rx << 0 [OFF]

[19:02:42:687] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [OFF]

[19:02:42:807] [Thread: 139838313761088] [Chan 1] - MF Rx << 5 [ON]

[19:02:42:807] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 19

[19:02:42:807] [Thread: 139838313761088] [Chan 1] - timer id 19 found, cancelling it now

[19:02:42:807] [Thread: 139838313761088] [Chan 1] - Getting ANI digit 5

[19:02:42:807] [Thread: 139838313761088] [Chan 1] - ANI so far: 34565205, expected length: 15

[19:02:42:807] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [ON]

[19:02:42:807] [Thread: 139838313761088] [Chan 1] - scheduled timer id 20 (mf_back_cycle)

[19:02:42:887] [Thread: 139838313761088] [Chan 1] - MF Rx << 5 [OFF]

[19:02:42:887] [Thread: 139838313761088] [Chan 1] - MF Tx >> 5 [OFF]

[19:02:42:987] [Thread: 139838313761088] [Chan 1] - MF Rx << F [ON]

[19:02:42:987] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 20

[19:02:42:987] [Thread: 139838313761088] [Chan 1] - timer id 20 found, cancelling it now

[19:02:42:987] [Thread: 139838313761088] [Chan 1] - Got end of ANI

[19:02:42:987] [Thread: 139838313761088] [Chan 1] - Requesting change to Group II with signal 0x33

[19:02:42:987] [Thread: 139838313761088] [Chan 1] - MF Tx >> 3 [ON]

[19:02:42:987] [Thread: 139838313761088] [Chan 1] - scheduled timer id 21 (mf_back_cycle)

[19:02:43:107] [Thread: 139838313761088] [Chan 1] - MF Rx << F [OFF]

[19:02:43:107] [Thread: 139838313761088] [Chan 1] - MF Tx >> 3 [OFF]

[19:02:43:227] [Thread: 139838313761088] [Chan 1] - MF Rx << 1 [ON]

[19:02:43:227] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 21

[19:02:43:227] [Thread: 139838313761088] [Chan 1] - timer id 21 found, cancelling it now

[19:02:43:228] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [ON]

[19:02:43:228] [Thread: 139838313761088] [Chan 1] - scheduled timer id 22 (mf_back_cycle)

[19:02:43:327] [Thread: 139838313761088] [Chan 1] - MF Rx << 1 [OFF]

[19:02:43:327] [Thread: 139838313761088] [Chan 1] - MF Tx >> 1 [OFF]

[19:02:43:327] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 22

[19:02:43:327] [Thread: 139838313761088] [Chan 1] - timer id 22 found, cancelling it now

[19:02:43:327] [Thread: 139838313761088] [Chan 1] - scheduled timer id 23 (r2_answer_delay)

[19:02:43:487] [Thread: 139838313761088] [Chan 1] - Attempting to cancel timer timer 23

[19:02:43:487] [Thread: 139838313761088] [Chan 1] - timer id 23 found, cancelling it now

[19:02:43:487] [Thread: 139838313761088] [Chan 1] - calling timer 23 (r2_answer_delay) callback

[19:02:43:731] [Thread: 139838205192512] [Chan 1] - CAS Tx >> [ANSWER] 0x04

[19:02:43:731] [Thread: 139838205192512] [Chan 1] - CAS Raw Tx >> 0x05

[19:02:48:372] [Thread: 139838205192512] [Chan 1] - Bits changed from 0x00 to 0x08

[19:02:48:372] [Thread: 139838205192512] [Chan 1] - CAS Rx << [CLEAR FORWARD] 0x08

[19:02:48:372] [Thread: 139838205192512] [Chan 1] - Far end disconnected. Reason: Normal Clearing

[19:02:48:449] [Thread: 139838205192512] [Chan 1] - Call ended

[19:02:48:449] [Thread: 139838205192512] [Chan 1] - Attempting to cancel timer timer 0

[19:02:48:449] [Thread: 139838205192512] [Chan 1] - Cannot cancel timer 0

image003.jpg

NTECH TELECOM

unread,
Nov 30, 2015, 4:22:35 PM11/30/15
to elasti...@googlegroups.com

Olá Alexandre,

Qual é o modelo da central da Intelbras? Se for da linha impacta. Teria de verificar se tem alguma coisa programada na conversão de saida da central que pode estar ocasionando este problema.

Att,
Neimar Rafael Bueno

Alexandre Trevizoli

unread,
Nov 30, 2015, 5:01:48 PM11/30/15
to elasti...@googlegroups.com

A central é uma IMPACTA 300R....

com placa R2 de 2 E1.

NTECH TELECOM

unread,
Nov 30, 2015, 5:24:44 PM11/30/15
to elasti...@googlegroups.com

Ok. Você tem acesso ao software de programação dela? Se tiver da uma olhada no campo roteamento, conversão de saida. Como funciona para alguns números e outros não pode ter alguma coisa configurada.

Caso não tenha nenhum conversão criada, a central não analisará o que VC teclar, ou seja ela vai mandar direto para a rota criada no seu caso o e1.

Outra coisa que VC poderia verificar seria dentro da opção roteamento o campo acesso a prefixo, pois é aí que a central é "ensinada" a como reconhecer uma discagem, local, ddd, cel e etc.

Att,
Neimar Rafael Bueno

Alexandre Trevizoli

unread,
Nov 30, 2015, 6:15:46 PM11/30/15
to elasti...@googlegroups.com

Neimar eu não tenho acesso, mas o antigo mantenedor da central tem, infelizmente vamos ter que acioná-lo, mas não acho que ele vá fazer força para nos ajudar, já que infelizmente ele nos vê como concorrentes.

 

Pelo que analisei nos logs, a chamada vem perfeita da intelbras pro pabx, o pabx roteia pelo SIP e devolve a chamada para a intelbras que após alguns segundos derruba a ligação, existe algo na Intelbras que possa estar fazendo isso...pois o problema está depois que o SIP retorna ANSWERED para o DAHDI, ou seja a chamada vai toda correta, só no final que a chamada é derrubada pela intelbras sem motivo aparente. Como não conheço os parâmetros que podem ser colocados nela eu não consigo enxergar o que pode estar derrubando a chamada no final, sempre para aquele mesmo número.

 

De qualquer forma vou pedir para o mantenedor da Intelbras olhar esta conversão de saída.

Se tiver mais algo que eu possa olhar me avise....Vou tentar dar uma olhada no manual, se é que tem isso no site...

Rafael Tavares

unread,
Nov 30, 2015, 6:19:47 PM11/30/15
to elasti...@googlegroups.com
Amigo da uma procurada no google sobre o parâmetro span da sua placa na porta que vai para o intelbras, e coloca ela como clock, pra central entender como se ela fosse um modem e1 e faz um teste, não lembro agora qual o parâmetro que tem que colocar mas tenho certeza que você deve achar rapidinho no google.

Boa sorte!

NTECH TELECOM

unread,
Nov 30, 2015, 6:48:56 PM11/30/15
to elasti...@googlegroups.com

Isto que o Rafael comentou tem lógica, pois nas duas interfaces de e1 da central estão como escravo, ou seja precisam que gere clock.

Alexandre Trevizoli

unread,
Dec 1, 2015, 7:47:17 AM12/1/15
to elasti...@googlegroups.com

Sim elas estão simulando o MODEM da Embratel, as duas do Pabx IP estão gerando o clock.

o primeiro digito é número do SPAN o segundo é 0 gera clock.

span=1,0,0,cas,hdb3
echocanceller=oslec,1-15,17-31
cas=1-15:1101
cas=17-31:1101
span=2,0,0,cas,hdb3
echocanceller=oslec,32-46,48-62
cas=32-46:1101
cas=48-62:1101

# Global data
loadzone        = br
defaultzone     = br

 

Outro teste que fizemos hoje foi, sair por outro SIP que não o da EMBRATEL, de um provedor VOIP que tenho conta, e para minha surpresa funcionou a ligação normalmente.

Significa que o problema está na EMBRATEL?

Mas como explicar que se a chamada vem da Intelbras e vai para o SIP da EMBRATEL dá problema e se faz pelo próprio PABX IP funciona?

Difícil hein?????

É foda eu sempre pego uns negócios muito complexos de resolver....é sina mesmo!!!!

NTECH TELECOM

unread,
Dec 1, 2015, 8:14:39 AM12/1/15
to elasti...@googlegroups.com
Uma explicação seria a troca de tecnologia de E1 para sip. A uns meses atrás instalei uma central impacta 68i da intelbras com voxip da gvt e aconteceu algo similar. O cliente migrou de e1 para o vox, ele tem uma agenda enorme com número de contato de cliente que só digitava um comando e a central discava, após a ativação do vox começou a falhar, ou seja a gvt não estava roteando as ligações. Liga para a embatel e explica que vc fez um teste com seu equipamento em outra estutura (e1) e funcionou.

Outra coisa se alguem tiver um passo a passo para configuração de voxip para o uso do elastix e quiser compartilhar, agradeço. pois tenho algumas dúvida na configuração se uso ou não duas placas de rede etc.

Att,
Neimar Bueno

From: ale.tr...@gmail.com
To: elasti...@googlegroups.com
Subject: RES: [ElastixBrasil] Ajuda Elastix interligando com PABX INTELBRAS via E1
Date: Tue, 1 Dec 2015 10:47:07 -0200

Marcos Ronaldo

unread,
Dec 1, 2015, 8:42:49 AM12/1/15
to elasti...@googlegroups.com
Coloca a E1 intebras pra receber o clock e a E1 do Elastix pra gerar p clock somente nesta placa

Att,

Marcos Ronaldo

Luciano Cavalcante Souza

unread,
Dec 1, 2015, 8:46:18 AM12/1/15
to elasti...@googlegroups.com
Voce esta usando cabo dte e dce?


Sds,
Luciano Cavalcante Souza
Tecnólogo em Gestão da Tecnologia da Informação
Mobile: + 55798814.5895(vivo)
e-mail: luci...@gmail.com
Skype: lucindio
Concentre-se nos pontos FORTES, reconheça as FRAQUEZAS, agarre as OPORTUNIDADES e proteja-se contra as AMEAÇAS.

Alexandre Trevizoli

unread,
Dec 9, 2015, 11:58:24 AM12/9/15
to elasti...@googlegroups.com

Pessoal só para conhecimento de todos a resolução de todos os problemas era uma incompatibilidade de SIP entre o Asterisk e o HUAWEI da EMBRATEL....

para resolver todos os problemas adicionamos o seguinte parâmetros no FREEPBX - Others SIP Settings...

 

send_diversion=no      (o default do asterisk é YES).

 

Segundo o pessoal da Embratel, eles faziam um roteamento errado para alguns destinos quando recebia este cabeçalho no SIP. (pelo que analisamos o problema aparecia em números portados)

Bruno Barbosa

unread,
Jan 8, 2019, 4:28:51 PM1/8/19
to ElastixBrasil

Boa Tarde!

 

Preciso dos parâmetros do  SIP Trunk da Embratel para o ELASTIX/ASTERISK.

 

Na instalação o técnico não soube informar, apenas foi passado o IP SIP

Bruno Barbosa

unread,
Jan 10, 2019, 7:42:05 AM1/10/19
to ElastixBrasil
Isso ocorre comigo aqui na empresa.

--

---
Você recebeu essa mensagem porque está inscrito no grupo "ElastixBrasil" dos Grupos do Google.
Para cancelar inscrição nesse grupo e parar de receber e-mails dele, envie um e-mail para elastixbrasi...@googlegroups.com.
Para postar nesse grupo, envie um e-mail para elasti...@googlegroups.com.
Acesse esse grupo em https://groups.google.com/group/elastixbrasil.
Reply all
Reply to author
Forward
0 new messages