[Gravity Free Download For S60 V5 Games For 5800 21
Ainoha Sistek
Proven primary standard
Dead weight testers are the most accurate instruments available on the market for the calibration of electronic or mechanical pressure measuring instruments. The direct measurement of the pressure (p = F/A), as well as the use of high-quality materials enable a very small measurement uncertainty, in conjunction with an excellent long-term stability.
It has therefore been used for years in factory and calibration laboratories in industry, national institutes and research laboratories.
Stand-alone operation
Due to its integrated pressure generation and the pure mechanical measuring principle, the model CPB5800 dead weight tester is ideal for on-site use for maintenance and service.
Basic principle
Pressure is defined as the quotient of force and area. The core component of the model CPB5800 dead weight tester is therefore a very precisely-manufactured piston-cylinder system, which is loaded with masses in order to generate the individual test points.
The mass load is proportional to the target pressure and this is achieved through optimally graduated masses. As standard, these masses are manufactured to the standard gravity (9.80665 m/s), though they can be adjusted to a specific location and calibrated according to UKAS accreditation.
KNIGHTSHIELD KS-5800 is a VOC-compliant, water-based, one-component primer for low energy surfaces. It forms an elastomeric base for silicone topcoats. KNIGHTSHIELD KS-5800 has a dark color to help speed the water evaporation and drying of the primer in direct sunlight. The coating can be applied using brush, roller, airless spray or notched squeegee following by back rolling.
KNIGHTSHIELD KS-5800 is recommended as an adhesion primer over surfaces where a topcoat direct-to-substrate adhesion test showed insufficient or questionable adhesion. KNIGHTSHIELD KS-5800 bonds to most low energy aged surfaces such as TPO and Kynar. It can also be used as a security measure over PVC and EPDM.
Twelve months from date of manufacture in the original, unopened container stored below 90 F (32 C). Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat or ignition.
KNIGHTSHIELD KS-5800 is compatible with all W. R. MEADOWS silicones, including KNIGHTSHIELD KS-5100, KS-5600 and KS-5700. Please contact W. R. MEADOWS for additional compatibility with after-market roof products.
It has therefore been used for years in factory and calibration laboratories in industry, national institutes and research laboratories.
Stand-alone operation
Due to its integrated pressure generation and the pure mechanical measuring principle, the model CPB5800 dead weight tester is ideal for on-site use for maintenance and service.
Type 5800 Elephant Trunk Hose is a premium quality gum rubber lined hose designed for the transfer of highly abrasive materials. Use elephant trunk hose for gravity-drop and low pressure conveyance of cement, cinders, and other abrasives. Elephant trunk hose often acts as a chute in small lengths to contain and direct dry materials when transferring to a hopper or conveyor system. For these applications we can offer lengths as short as 2 feet.
Also available as textile reinforced or plain pure gum tube (no separate hose cover). This hose can be manufactured with a thicker wall, and in large diameters to meet a variety of custom installations. Also see Type 7801 PVC discharge hose in sizes up to 16 inch diameter for light duty or temporary applications.
The dual-range piston-cylinder system offers two measuring ranges in one housing with automatic switching from low-pressure to high-pressure pistons. This provides an extremely flexible measuring instrument covering a wide range at high accuracy, using one piston-cylinder and one set of weights. Additionally, two test points can automatically be achieved with one set of masses.
The CPS5800 piston and cylinder are manufactured from hardened steel and tungsten carbide, respectively. Together these materials have a low coefficient of expansion with respect to pressure and temperature. This results in a very good linearity for the cross-sectional area and a very high accuracy.
The piston and cylinder are protected against contact, impacts or contamination from outside, in a solid stainless steel / hardened tool steel housing. Integrated overpressure protection prevents the piston from being forced out vertically, avoiding damage to the piston-cylinder system in the event of mass removal under pressure.
The overall design of the piston-cylinder unit and the precise tolerances of both the piston and the cylinder, ensure exceptionally low friction force, which results in excellent operating characteristics with long free-rotation time and low sink rates. Thus, a high long-term stability is ensured. The recommended recalibration interval is 5 years depending on the conditions of usage.
The DH-Budenberg CPB5800, with an accuracy of 0.006% of reading is ideally suited to Laboritory calibration of pressure transmitters pressure transducers,and mechanical gauges. With integrated (hydraulic) pressure generation and a purely mechanical measuring principle. there is no electrical power required for operation.
The pressure is set via an integrated, finely adjustable, precision spindle pump. As soon as the measuring system reaches equilibrium, there is a balance of forces between pressure and the force generated by the mass applied over the area of the piston. The quality of the piston / cylinder system ensures that this pressure remains stable over several minutes so that the device under test can be calibrated or adjusted.
In addition, the CPB5800 built-in spindle pump is easy to operate even at very high pressures, and features a threaded spindle which moves within the pump body. The spindle pump handle does not move in or out of the body of the pump as the handle is turned, therefore there are no cantilever forces or changes in the overall size of the base as the pressure is changed.
Deadweight testers (also known as Pressure Balances and Mass Balances) are the most accurate instruments for the calibration of electronic or mechanical pressure instruments. Pressure is defined as a force applied over an area: P = F/A; this is exactly how a stable pressure is achieved in the CPB5800. The use of precisely machined, high-quality materials, result in high accuracy and an excellent long-term stability of five years. For these reasons deadweight testers or pressure balances have been used in the calibration laboratories of industry, national standards institutes and research laboratories for many years.
The electrodynamic shaker systems below consist of a shaker and a matching linear direct-coupled power amplifier. You can add additional components to the basic system to tailor it to specific needs. These systems have been designed and manufactured with both its shakers and matching amplifiers in tandem.
The 606F-lb pk system is one of the largest of the current family of Vibration Research systems. The large diameter armature adapts to many test requirements with a minimal amount of fixturing. High lateral and axial stiffness decrease problems associated with off-center loads. Unsupported horizontal operation is possible on many loads. The cooling blower is direct coupled to the shaker to give the maximum performance. An optional slip table is available for horizontal testing. Optional load supports allow testing loads with a high center of gravity. The suspension stiffness is adjustable. Electronic load compensation allows heavier loads.
The 500F-lb pk system uses a larger shaker with a large 6-inch diameter armature table, making it easy to adapt to almost any test requirement with a minimum of fixturing. The high lateral stiffness carbon composite armature suspension reduces problems associated with off-center loads and allows unsupported horizontal operation with many loads. The system is equipped with a degauss coil to ensure a low stray magnetic field for sensitive applications. The modular, air-cooled amplifier is direct coupled to the shaker to give the maximum performance at low and high frequencies. Digital meters display the system operating levels, and complete shaker and external interlocks help protect the system from accidental abuse. Oil film slip table base systems are available for larger and heavier loads or loads with high centers of gravity.
795a8134c1