EPwave to view signals at different module hierarchies

[Suresh Kumar]

Is it possible to view the signals at lower module hierarchies hooked up to the top level using `include?

[Victor Lyuboslavsky]

Yes. Use "Get Signals" button in EPWave to get the signals from the available hierarchy.

Post a link to your playground if you have further questions.

-Victor

On Thu, Oct 23, 2014 at 4:20 AM, Suresh Kumar <prsuresh...@gmail.com> wrote:

Is it possible to view the signals at lower module hierarchies hooked up to the top level using `include?

--
You received this message because you are subscribed to the Google Groups "EDA Playground" group.
To unsubscribe from this group and stop receiving emails from it, send an email to eda-playgroun...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/eda-playground/0e5cc927-c0e5-481a-9138-dc714e17e1c2%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Suresh Kumar]

Only top level signals are shown. Unable to get down into hierarchies using 'Get Signals'.

 Please see 

http://www.edaplayground.com/x/FyX

http://www.edaplayground.com/w/x/Ds

[Victor Lyuboslavsky]

Use $dumpvars(0); instead of $dumpvars(1);

Using "1" means only the first level of hierarchy will be dumped to waves. "0" means all levels will be dumped.

http://www.edaplayground.com/x/P5n

To view this discussion on the web visit https://groups.google.com/d/msgid/eda-playground/4187e372-dbd6-4302-81c7-f968082a397a%40googlegroups.com.

[Suresh Kumar]

Thanks a lot Victor