Activar Windows Xp Service Pack 3
Agathe Thies
Step 4: Install the license key. The following code adds the Windows activation license to the computer: $service.InstallProductKey($key) and $service.RefreshLicenseStatus(). Replace $key with your license key for Windows.
A wildly wrong date will break anything that uses ssl/tls, as certificates will be assumed to be either expired (if the date is in the future) or not yet valid (if the date is in the past). This apparently includes windows activation.
But I think it is for configuration only. I think it cannot be used to activate a tunnel. The original documentation ( -line-interface ) explains that "the interface can ... be activated with ifconfig(8) or ip-link(8)" but of course that works for unix only. In that documentation, there is another note "Non-Linux users will instead write wireguard-go wg0" but I'm not sure what they mean here. There is no program name "wireguard-go" anywhere. The network adapter for the tunnel only shows up in the network adatpter list when the tunnel is already active. E.g. there is no network adapter that I could "enable" or "activate" when the tunnel is down. Finally, there is wireguard.exe. When started without parameters, it is a GUI application. It cannot be run without a logged in user and a desktop, and it does not activate any tunnel automatically. It has some interesting command line options. "wireguard.exe /managerservice" is used to start it as a windows service. "wireguard.exe /tunnelservice CONFIG_PATH" looks promising, but I was not able to start that. I get this error, that "the process could not connect to the service manager" or something similar. (I also get this error when I start it as administrator.)
(This give you a nice icon on the system tray that shows the up status of the WireGuard tunnel service. Green = connected, red = not connected, and you can start and stop it by right clicking. See image below)
Then I wrote another script that starts or stops the service based on the presence or absence of that file on a one second loop. I run it as a scheduled task running as SYSTEM and triggered by system start up.
Now I use that script as a button that starts and stops the service but I don't need any admin logins or overrides, just toggle the VPN on or off. The system tray icon very conveniently shows a red or green indicator.
The error 0x80070426 means ERROR_SERVICE_NOT_ACTIVE - The service has not been started. Run the services MMC snapin (services.msc) as admin (rightclick and select run as admin) and make sure the Software Protection service is not configured as disabled. Set it to automatic and start the service.
You can download Windows 8 or 8.1 from Windows legally as long as you have a genuine product key. Go to -gb/software-download/windows8 and download the media creation tool + ISO (if you cannot download through this website then let me know and I will direct you to other links). You will have to do this from a friend's computer. Remember to backup all your files before formatting the drive.
Once you have gone through the whole process of installing, Windows should activate automatically. However, if it does not activate automatically, press windows+R and type slui 3 into the run bar. This will allow you to run activation again.
The Windows activation error code 0x80072f8f usually occurs while updating, when the computer is trying to connect to the online activation service, or when the product key is not verified during activation. When the error appears during Windows installation, it could indicate that the computer settings were found invalid during the verification.
The amount of Azure credits that you receive depends on the type of Visual Studio subscription you have. When you reach the monthly cap for your credits, your Azure services will stop until your next monthly credits are added unless you choose to remove the spending cap by upgrading to pay-as-you-go pricing.
The monthly Azure credit for Visual Studio subscribers is for development and testing only and does not carry a financially backed SLA. We reserve the right to suspend any instance (VM or cloud service) that runs continuously for more than 120 hours or if we determine that the instance is being used for production. We are making this capacity available to Visual Studio subscribers on a best-effort basis; there is no guarantee of capacity availability.
If the Windows Activation service is unavailable, it may not be possible to activate your copy of Windows 10 online. You can wait 12 hours and attempt activation again to see if the issue is resolved, or you can use the instructions below to activate immediately via telephone.
During instalation of docker I checked enable Hyper-V. And after restart my computer. I got popup with that "Error occured: Cannot enable hyper-v service"
I checked that I have enabled Hyper-V and virtualization in BIOS.
I realize its an old thread but just want to put out what fixed mine. I had ubuntu as a dual boot with my windows 10. As soon as I removed grub and ubuntu, I could enable hyper-v easily. I think temporarily disabling grub would work fine instead of removing it like I did.
Supporting systemd required changes to the WSL architecture. As systemd requires PID 1, the WSL init process started within the Linux distribution becomes a child process of the systemd. Because the WSL init process is responsible for providing the infrastructure for communication between the Linux and Windows components, changing this hierarchy required rethinking some of the assumptions made with the WSL init process. Additional modifications had to be made to ensure a clean shutdown (as that shutdown is controlled by systemd now) and to have compatibility with WSLg, It is also important to note that with these change, systemd services will NOT keep your WSL instance alive. Your WSL instance will stay alive in the same way it did before, which you can read more about here.
Copyright 2023 Tenable, Inc. All rights reserved. Tenable, Tenable Nessus, Tenable Lumin, Assure, and the Tenable logo are registered trademarks of Tenable, Inc. or its affiliates. All other products or services are trademarks of their respective owners.
Procedures: (Screen capture base on Windows 10 - Build version 1803)
- Connect to the campus network. If you are outside the campus network, please connect with VPN first.
- Launch "Command prompt" by clicking the 'Search' button at the bottom. Then type 'cmd' in the text box provided. You need to have administrator permission. To do so, right click the 'common prompt' and choose Run As Administrator.
- Firstly, we need to tell windows which is the KMS license server we are going to communicate:
- slmgr /skms kms.eduhk.hk
- A success message will pop-up as below:
- Then we can activate the Windows
- slmgr /ato
- A success message will pop-up as below:
- Type the following command:
- Type the following command:
You need to activate Windows every 180 days; otherwise the system will fall back to trial mode and it will be locked after 30 days. To extend the activation period for another 180 days, you simply make VPN connection to the campus network, and extension will be done automatically. If you want to check when the license period expires, you can run the following command:
It means i dont need to put windows 10 kms key into windows server 2016 kms host server. I just need to put windows server 2016 kms key in it and i can activate windows 10 client machine from it. Right? I will get GLVK key and activate windows 10 client from it. Right?
How does it even know how many windows client i can activate from it? How can i calculate the count of windows 10 client machine because i didnt do anything on server side related to windows 10 kms key?
Installing and configuring the SNMP service on the different Windows client and server versions mostly works the same way. You can do it using GUI (Graphical Unit Interface) or via PowerShell. We will show you both methods.
On Windows versions older than Windows 8 and Windows Server 2012, it is already installed. For Windows 8, Windows 10, Windows 11, Windows Server 2012, Windows Server 2016, Windows Server 2019 and Windows Server 2022 you will have to install the SNMP service first.
If you are using OpenSuse, the snmpd service may not be activated and started by default. In this case, activate the snmpd service so it will start on system boot with the command: systemctl enable snmpd. Then start the service with the command systemctl start snmpd.
I can't really understand what prevented you from developing something like "WMI proxy" which will run as a service on remote machine and execute all the WMI queries - there won't be any overloads, permission issues, flickering issues and so on...
@Vadim Doroginin: Actually we did develop such a service. It's called "Remote Probe" and can be installed on one, or a few, or all your machines in your network. But it's a lot of work to install a software on all machines in a network and in most cases it is not necessary.
A while back I started closely monitoring the WMI service on the various servers that often false alarm during WMI overload. Most often, the free space check would fail returning a null or zero value instead of the correct value for free disk space. To troubleshoot, I added the PRTG WMI service monitor for the WMI Service itself with a 60 second interval. I also monitored the system and application event logs with 15 minute intervals. It helped to get more specific errors about what was going on with WMI. Most often I'd get one of these errors in succession:
- start windows firewall logging and check the logs for dropped connectionsGo to the Windows Firewall, Advanced settingsSecurity Log group-box -> Click on Parameters buttonSelect "Log dropped packets"Look at the log file location (if not present define one)Click OK
I've meticulously followed the guides and troubleshooting steps, set permissions in DCOM, WMI, ensured the services are running, allowed WMI through the Windows Firewall (even though the firewalls are set to off) and ensured PRTG is using the right credentials.
aa06259810