Fwd: FW: Requirement with RBEI for Mechanical Design Engineers
13 views
Skip to first unread message
Taj peer
Nov 21, 2011, 6:39:58 AM11/21/11
to Shoeb, ubdtpl...@googlegroups.com, ec_...@googlegroups.com
---------- Forwarded message ----------
From: <tajp...@smartplayin.com>
Date: Mon, Nov 21, 2011 at 5:08 PM
Subject: FW: Requirement with RBEI for Mechanical Design Engineers
To: taj5ex...@gmail.com
-----Original Message-----
From: "Preethi Sirivaram (RBEI/EEP1)" <Preethi....@in.bosch.com>
Sent: Monday, November 21, 2011 6:32am
To: "Shilpa Agnihotri" <Shilpa_A...@mindtree.com>, "Barath Vijayaraghavan" <Barath_Vij...@mindtree.com>, "Deshpande, Nayan" <Nayan.D...@philips.com>, "Supritha_N...@mindtree.com" <Supritha_N...@mindtree.com>, "srinivasa...@smartplayin.com" <srinivasa...@smartplayin.com>, "tajp...@smartplayin.com" <tajp...@smartplayin.com>, "h.ma...@samsung.com" <h.ma...@samsung.com>, "Shanmugapriya Durai" <Shanmugap...@mindtree.com>
Subject: FW: Requirement with RBEI for Mechanical Design Engineers
________________________________
From: FIXED-TERM Kavitha K (RBEI/EEG,EEN-Sekr)
Sent: Monday, 21. November 2011 4:53 PM
To: RBEI/EEG-Ban Associates; RBEI/EEN-Ban Associates; RBEI/EEP-Associates in Kor
Subject: FW: Requirement with RBEI for Mechanical Design Engineers
Importance: High
Fyi..
Warm Regards,
Kavitha RBEI/EEN,EEG-Sekr
________________________________
From: Buddy Referral (RBEI/HRL-M)
Sent: Monday, November 21, 2011 4:47 PM
To: RBEI/Secretaries
Cc: Rajesh Panicker (RBEI/HRL1-M)
Subject: Requirement with RBEI for Mechanical Design Engineers
Importance: High
Hi All,
Please forward this email to everyone in your department and mark a cc to Buddy referral.
Kindly Cooperate.
Thanks in advance,
Buddy Referral
[cid:image0...@01CCA86D.37FE5C20]
Dear Associates,
"Larger the group of friends, the merrier the work-place!" Here is an opportunity to refer your family member or friend to Bosch as we have a pre-screened walk-in event scheduled in Delhi and Bangalore for the requirements mentioned below.
Please start referring and send us the resumes by Wednesday.
Work location for all the requirements is Bangalore.
When?
Saturday, 26th November 2011.
Walk-ins @ Delhi:
Job Code - ENC1/TT-STT/Solar Collectors
Qualification : BE (Mechanical) Experience : 4 to 6 years
Technical requirements:
1. Sound knowledge of handling assembly, sub - assembly & component level designs in a product development environment are a must.
2. Independently handle development and component design requirements by generating concepts and taking them through CAD & development cycle is essential.
3. Knowledge on GD&T and Tolerance stack up is essential.
4. Knowledge on Solar collectors will be an added advantage.
5. Sound knowledge of UG NX and teamcenter.
Domain knowledge : Design of Solar Collectors (domestic and industrial)
CAD Knowledge : UG NX4 and above, Solid edge V19, Team centre engineering
Recommended fields:
Renewable Energy, Solar energy, Engineering services firms.
Job Code - ENC1/TT-STT/Storage Tanks
Qualification : BE (Mechanical) Experience : 4 to 6 years
Technical requirements:
1. Sound knowledge of handling assembly, sub - assembly & component level designs in a product development environment are a must.
2. Independently handle development and component design requirements by generating concepts and taking them through CAD & development cycle is essential.
3. Knowledge on GD&T and Tolerance stack up is essential.
4. Exposure to sheet metal design is essential
5. Knowledge on Solar storage tanks will be an added advantage.
6. Sound knowledge of UG NX and Teamcentre.
Domain knowledge : Design of Storage tanks
CAD Knowledge : UG NX4 and above, Solid edge V19, Team centre engineering
Recommended fields:
Renewable Energy, Solar energy, Engineering services firms.
Job Code - ENC1/TT-STT/ Gas burner
Qualification : Ms or PhD (Mechanical) Experience: 5 - 8 years
Technical requirements:
1. Proven experience with concept, dimensioning & development of gas burners in a product development environment is a must.
2. Design, calculation and specification of gas burners from concept to industrialization phase is essential
3. Good knowledge of combustion Engineering including Low Nox, emission reduction techniques and noise resonance control is a must
4. Experience in calculation and simulation tools for combustion systems and knowledge of high power density and high modulation range burners is required.
5. Good knowledge and experience in air flow calculation and fan impeller design, including CFD simulation tools is desirable
6. Knowledge of optical diagnostic tools for combustion systems and combustion lab techniques is desirable.
Domain knowledge : Combustion Engineering, Gas burner development, Water heater development
Software Knowledge : CFD, FEA, 1D, 2D simulation tools
Recommended fields:
Gas Water heater manufacturers, Gas burner manufacturers, Technical Universities or Engineering service providers for combustion related business
Job Code - ENC1/TT-STT/Heat exchanger
Qualification : Ms or PhD (Mechanical) Experience: 5-8 years
Technical requirements:
1. Proven experience with concept, dimensioning & development of flue gas condensing heat exchangers in a product development environment is a must.
2. Design, calculation and specification of Heat Exchanger from concept to industrialization phase is essential
3. Good knowledge of modeling and simulation tools for heat exchangers and related components is a must
4. Experience in efficiency optimization and knowledge of development methods for compact heat exchanger design is required.
5. Good knowledge and experience in corrosion and material engineering is desirable
6. Knowledge of lifetime tests and requirements for heat Exchangers is desirable.
Domain knowledge : Heat Transfer, Thermodynamics, Condensing heat exchanger, Gas water heater development
Software Knowledge : FEA, CFD, 1D, 2D simulation tools
Recommended fields:
Gas water heaters manufacturers, Heat Exchanger manufacturers, Technical universities or Engineering service providers for gas water heaters related business.
Job Code - ENC1/TT-STT/Heat Pump
Qualification : Ms or PhD (Mechanical) Experience : 5-8 years
Technical requirements:
1. Proven experience with concept, dimensioning & development of refrigeration system & its components in a product development environment is a must.
2. Design, calculation and specification of Heat Pump components from concept to industrialization phase is essential
3. Good knowledge of modeling and simulation tools for refrigeration systems and related components is a must
4. Experience in evaporator and condenser design and knowledge in the related dimensioning tools is required.
5. Good knowledge and experience in air flow calculation and fan impeller design, including CFD simulation tools is desirable
6. Knowledge of compressor engineering fundamentals is desirable.
Domain knowledge : Refrigeration, Heat Pump, Heat pump water heater development
Software Knowledge : CFD, 1D, 2D simulation tools
Recommended fields:
Heat Pump manufacturers, Heat Exchanger manufacturers, Technical universities or Engineering service providers for refrigeration related business.
Job Code - ENC1/TT /Plastic components
Qualification : BE (Mechanical) Experience: 4 to 6 years
Technical requirements:
1. Sound knowledge of handling assembly, sub - assembly & component level designs in a product development environment are a must.
2. Independently handle development and component design requirements by generating concepts and taking them through CAD & development cycle is essential.
3. Knowledge on GD&T and Tolerance stack up is essential.
4. Knowledge on Plastics and Tooling is a must.
5. Knowledge on Sheet metal will be an added advantage.
6. Sound knowledge of UG NX and Teamcentre.
Domain knowledge : Design of Plastic components
CAD Knowledge : UG NX4 and above, Solid edge V19, Team centre engineering
Recommended fields:
Renewable Energy, Solar energy, Engineering services firms.
Job Code - ENC1/TT /HVAC
Qualification : BE (Mechanical) Experience : 5 to 8 years
Technical requirements:
1. Sound Knowledge in UG NX 4/7.5 and Teamcenter Engineering
2. Working experience in part modeling, assembly, sheet metal, routing and drafting modules in UG
3. Experience in sheet metal design is essential
4. Knowledge on GD&T and Tolerance stack up is essential.
5. Knowledge on HVAC domain will be an added advantage.
6. Independently handle development and component design requirements by generating concepts and taking them through CAD & development cycle is essential.
Domain knowledge : Design of Sheet metal enclosures, air condition units
CAD Knowledge : UG NX4 and above, Solid edge V19, Team centre engineering
Recommended fields:
Refrigeration, Air conditioning, Engineering services firms.
Job Code - ENC1/BSH /System Engineer
Qualification : BE (Mechanical) Experience: 5 to 7 years
Technical requirements:
1. System requirement understanding, integration of subsystems and interdependencies like cooling to accessories to structural
2. Proven experience with design & development of refrigeration system & its components in a product development environment is a must.
3. Knowledge of refrigerator testing.
4. Simulation interfacing from system standpoint.
5. Design reviews tools and capabilities
6. Exposure to new product development life cycles
7. Understanding of various manufacturing & validation processes associated with Refrigerators system is desirable.
8. Sound knowledge of engineering fundamentals with co-relation of basic physics to engineering mechanisms is desirable.
Domain knowledge : Complete system knowledge of refrigerator development
Software Knowledge : UG CAD skills
Recommended fields:
Home Appliance manufacturer
Job Code - ENC1/BSH /Mechatronics
Qualification : BE/ME (Mechanical/Mechatronics) Experience: 4 to 7 years
Technical requirements:
1. Proven experience with design & development of Electrical & Electronics components such as LED-Circuits, Defrost heating control, motors
2. Good knowledge in wire harness.
3. Desirable to have wire harness design using CAD software.
4. Knowledge of Microcontrollers
5. Understanding of various manufacturing & validation processes associated with Refrigerators system is desirable.
6. Sound knowledge of engineering fundamentals with co-relation of basic physics to engineering mechanisms is desirable.
Domain knowledge : Knowledge of electrical & electronic control circuits in Home appliances
Software Knowledge : Wire harness module in UG or Pro-e
Recommended fields:
Home Appliance manufacturers
Job Code - ENC1/BSH /Cooling Engineer
Qualification : BE (Mechanical) Experience : 3 to 6 years
Technical requirements:
1. Proven experience with design and development of refrigeration cooling system & its components in a product development environment is a must.
2. Proven experience in Heat load calculation
3. Knowledge of proto making
4. Understanding of various manufacturing & validation processes associated with Refrigerators system is desirable.
5. Sound knowledge of engineering fundamentals with co-relation of basic physics to engineering mechanisms is desirable.
Domain knowledge : Cooling circuit design of refrigerator
Software Knowledge : UG
Recommended fields:
Refrigerator manufacturers, cooler manufacturers, Service providers for refrigeration related business.
Job Code - ENC1/BSH /Design Engineer
Qualification : BE (Mechanical) Experience : 3 to 6 years
Technical requirements:
1. Proven experience with design & development of home appliance system & its components in a product development environment is a must.(Preferably Refrigerator, Ovens, Washing machine)
2. Design of structural and aesthetic components of from concept development to manufacturing drawing release is essential
3. Good CAD knowledge in handling assembly, GD & T, plastic parts design is a must
4. Understanding of various manufacturing & validation processes associated with Home appliance system is desirable.
5. Sound knowledge of engineering fundamentals with co-relation of basic physics to engineering mechanisms is desirable.
Domain knowledge : Home appliance product Development, Manufacturing
Software Knowledge : UG or Pro-e
Recommended fields:
Refrigerator manufacturers, oven, visi cooler manufacturers, Service providers for refrigeration, oven, burner, related business.
Job Code - ENC2/Product design ( Unigraphics)
Qualification : Bachelor Degree in Mechanical / Automobile / Production with good academics
Experience : 3 to 5 years of experience, most preferable would be with automobile industry experience
Requirements:
1. Knowledge and work experience in Automobile components / Products
2. Required Software Skills: Unigraphics / Pro-E and Wind-chill
3. Candidate should have good Technical knowledge
4. Knowledge of Manufacturing processes, Die Cast and Injection Mold process
5. Should have experience working with overseas customer
6. Exposure to German Language will be an added advantage
7. Good knowledge in GD&T
Job Code - ENC2/Reverse Engineering and Benchmarking
Qualification : Bachelor Degree in Mechanical / Automobile / Production with good academics
Experience : 3 to 5 years of experience, most preferable would be with automobile industry experience.
Requirements:
1. Knowledge and work experience in Automobile components / Products
2. Required Software Skills: Unigraphics / Pro-E and Wind-chill
3. Candidate should have good Technical knowledge
4. Knowledge of Manufacturing processes, Die Cast and Injection Mold process
5. Knowledge on Reverse Engineering and Benchmarking processes
6. Good knowledge on cost estimation
7. Should have experience working with overseas customer
8. Good knowledge in GD&T
Job Code - ENC2/ZFLS
Qualification : Bachelor Degree or Diploma in Mechanical / Automobile with good academic background.
Experience : 3 to 5 years of experience in designing EPS Rack, Pinion Steering Gears & enclosures for Steering Gears.
Tasks:
1. To develop Concept design
2. Steering system Packaging assemblies and analysis
3. Tolerance stack-up analysis
4. Design Modifications
5. To create 3D models and 2D drawings in ProE
Requirements:
1. Knowledge and work experience in Automobile components / Products, preferably in steering systems.
2. Candidate should have good Technical skills with reference to cast and machined parts, manufacturing and assembly processes.
3. Good Knowledge in GD&T.
4. Knowledge on Programming skills would be preferable
5. CAD tool: Pro-e (Wildfire-4) minimum 3000hrs hands on exposure
Job Code - ENC2/ ATMO
Qualification : Bachelor Degree in Mechanical / Automobile / Production with good academic background.
Experience : 2 to 3 years of experience in the field of standard parts modeling, Machine Design, Assembly line of Auto components.
Tasks:
1. Creation of assembly line machine concepts
2. Design of Fixtures
3. Catalogue part creation
4. Creation of 3D modeling and 2D manufacturing drawings
Requirements:
1. Candidate should have good Technical skills.
2. Good knowledge of manufacturing processes, GD&T.
CAD Skills: Should be good in Inventor.
Job Code - ENC2/ED-Specialist
Qualification : B.E in Mechanical Engineering or Industrial Engineering
Experience : 6 - 10 years of experience in the area of Plastic parts design and manufacturing.
Requirements:
1. Hands on experience in design of complex Plastic parts and manufacturing
2. Knowledge of GD&T and Tolerance Stack-up.
3. Should be able to handle the project independently
4. Knowledge of German language.
5. Knowledge of CAD Tool CATIA V5
Job Description:
Technology coordinator for plastic parts
1. Coordination with design, materials and manufacturing teams.
2. Identify and interpret the manufacturing implications.
3. Project Planning and Co-ordination with tooling development for component development.
4. Design Reviews, DFMEA, and Design Validation with cross functional team.
5. Interaction with offshore team.
Job Code - ENC2/ED-Engineers
Qualification : B.E in Mechanical Engineering or Industrial Engineering/ Diploma.
Work experience: 3 - 4 years of experience in the area of Plastic parts design and manufacturing
Requirements:
1. Experience in design of complex Plastic parts and manufacturing
2. Knowledge of GD&T and Tolerance Stack-up.
3. GoodKnowledge of CAD Tool CATIA V5
4. Knowledge of German is an added advantage
Walk-ins @ Bangalore:
Job Code- ECU/ Specialist/Tool Design Engineer (Plastic injection mold Design)
Qualification : Graduation in Mechanical Engineering with Post Diploma in Plastics Mould Technology from CIPET/NTTF/GTTC
Work experience: 5 to 8 years of hands on experience in design & development of transfer molds/Injection Molds.
Requirements:
1. Simulation experience with Moldflow or alternative filling simulation tool .
2. Experience with Mold material (transfer molding material would be best, injection molding material is also acceptable).
3. Deep machine/tooling know-how (must have already designed tooling for transfer molding or injection molding)
4. Process knowhow on transfer molding or injection molding
5. Must be able to guide technicans working on the mold machine
6. Must be able to give the right inputs to design/construction from machine side ("what is feasible")
7. Thorough Knowledge in Plastics
8. Proficient in Pro/Engineer WF4.0
Job Code/EIA/ PLC Programmers
Qualification : BE / B.Tech. (EEE, ECE, Instrumentation)
Work experience : 2 - 7 Yrs Experience
Core Responsibilities:
1. Programming of function blocks for various PLCs viz. EDC, Siemens, Rockwell (AB), 3-S Plcs (Rexroth, Beckhoff) etc.
2. Test / User Documentation / Maintenance of the function blocks
Requirements:
1. Sound Knowledge on IEC - 61131-3 PLC programming languages (ST, LD, FBD, SFC, IL)
2. Thorough understanding of PLC Architecture, Scan times and Task handling.
3. Extensively worked on Functions & Function blocks.
4. Hands on Experience in programming Motion Controllers, Servo Amplifiers & Servo Motors, VFDs
5. Knowledge of Industrial Field buses like SERCOS, Profibus, Device-Net, MODBUS etc.
6. German Language knowledge is added advantage.
Send the updated resume to: Buddy.r...@in.bosch.com<mailto:Buddy.r...@in.bosch.com>
Please note: The subject line should read as follows - e.g. PLC Programmers - 3yrs - Bangalore(requirement) (Skill) e.g. Motion Controllers, then experience - e.g. 3 yrs and finally the location for which you are referring the candidate e.g. Bangalore.
Regards,
Buddy Referral
.
[cid:image0...@01CCA86D.37FE5C20]
From: <tajp...@smartplayin.com>
Date: Mon, Nov 21, 2011 at 5:08 PM
Subject: FW: Requirement with RBEI for Mechanical Design Engineers
To: taj5ex...@gmail.com
-----Original Message-----
From: "Preethi Sirivaram (RBEI/EEP1)" <Preethi....@in.bosch.com>
Sent: Monday, November 21, 2011 6:32am
To: "Shilpa Agnihotri" <Shilpa_A...@mindtree.com>, "Barath Vijayaraghavan" <Barath_Vij...@mindtree.com>, "Deshpande, Nayan" <Nayan.D...@philips.com>, "Supritha_N...@mindtree.com" <Supritha_N...@mindtree.com>, "srinivasa...@smartplayin.com" <srinivasa...@smartplayin.com>, "tajp...@smartplayin.com" <tajp...@smartplayin.com>, "h.ma...@samsung.com" <h.ma...@samsung.com>, "Shanmugapriya Durai" <Shanmugap...@mindtree.com>
Subject: FW: Requirement with RBEI for Mechanical Design Engineers
________________________________
From: FIXED-TERM Kavitha K (RBEI/EEG,EEN-Sekr)
Sent: Monday, 21. November 2011 4:53 PM
To: RBEI/EEG-Ban Associates; RBEI/EEN-Ban Associates; RBEI/EEP-Associates in Kor
Subject: FW: Requirement with RBEI for Mechanical Design Engineers
Importance: High
Fyi..
Warm Regards,
Kavitha RBEI/EEN,EEG-Sekr
________________________________
From: Buddy Referral (RBEI/HRL-M)
Sent: Monday, November 21, 2011 4:47 PM
To: RBEI/Secretaries
Cc: Rajesh Panicker (RBEI/HRL1-M)
Subject: Requirement with RBEI for Mechanical Design Engineers
Importance: High
Hi All,
Please forward this email to everyone in your department and mark a cc to Buddy referral.
Kindly Cooperate.
Thanks in advance,
Buddy Referral
[cid:image0...@01CCA86D.37FE5C20]
Dear Associates,
"Larger the group of friends, the merrier the work-place!" Here is an opportunity to refer your family member or friend to Bosch as we have a pre-screened walk-in event scheduled in Delhi and Bangalore for the requirements mentioned below.
Please start referring and send us the resumes by Wednesday.
Work location for all the requirements is Bangalore.
When?
Saturday, 26th November 2011.
Walk-ins @ Delhi:
Job Code - ENC1/TT-STT/Solar Collectors
Qualification : BE (Mechanical) Experience : 4 to 6 years
Technical requirements:
1. Sound knowledge of handling assembly, sub - assembly & component level designs in a product development environment are a must.
2. Independently handle development and component design requirements by generating concepts and taking them through CAD & development cycle is essential.
3. Knowledge on GD&T and Tolerance stack up is essential.
4. Knowledge on Solar collectors will be an added advantage.
5. Sound knowledge of UG NX and teamcenter.
Domain knowledge : Design of Solar Collectors (domestic and industrial)
CAD Knowledge : UG NX4 and above, Solid edge V19, Team centre engineering
Recommended fields:
Renewable Energy, Solar energy, Engineering services firms.
Job Code - ENC1/TT-STT/Storage Tanks
Qualification : BE (Mechanical) Experience : 4 to 6 years
Technical requirements:
1. Sound knowledge of handling assembly, sub - assembly & component level designs in a product development environment are a must.
2. Independently handle development and component design requirements by generating concepts and taking them through CAD & development cycle is essential.
3. Knowledge on GD&T and Tolerance stack up is essential.
4. Exposure to sheet metal design is essential
5. Knowledge on Solar storage tanks will be an added advantage.
6. Sound knowledge of UG NX and Teamcentre.
Domain knowledge : Design of Storage tanks
CAD Knowledge : UG NX4 and above, Solid edge V19, Team centre engineering
Recommended fields:
Renewable Energy, Solar energy, Engineering services firms.
Job Code - ENC1/TT-STT/ Gas burner
Qualification : Ms or PhD (Mechanical) Experience: 5 - 8 years
Technical requirements:
1. Proven experience with concept, dimensioning & development of gas burners in a product development environment is a must.
2. Design, calculation and specification of gas burners from concept to industrialization phase is essential
3. Good knowledge of combustion Engineering including Low Nox, emission reduction techniques and noise resonance control is a must
4. Experience in calculation and simulation tools for combustion systems and knowledge of high power density and high modulation range burners is required.
5. Good knowledge and experience in air flow calculation and fan impeller design, including CFD simulation tools is desirable
6. Knowledge of optical diagnostic tools for combustion systems and combustion lab techniques is desirable.
Domain knowledge : Combustion Engineering, Gas burner development, Water heater development
Software Knowledge : CFD, FEA, 1D, 2D simulation tools
Recommended fields:
Gas Water heater manufacturers, Gas burner manufacturers, Technical Universities or Engineering service providers for combustion related business
Job Code - ENC1/TT-STT/Heat exchanger
Qualification : Ms or PhD (Mechanical) Experience: 5-8 years
Technical requirements:
1. Proven experience with concept, dimensioning & development of flue gas condensing heat exchangers in a product development environment is a must.
2. Design, calculation and specification of Heat Exchanger from concept to industrialization phase is essential
3. Good knowledge of modeling and simulation tools for heat exchangers and related components is a must
4. Experience in efficiency optimization and knowledge of development methods for compact heat exchanger design is required.
5. Good knowledge and experience in corrosion and material engineering is desirable
6. Knowledge of lifetime tests and requirements for heat Exchangers is desirable.
Domain knowledge : Heat Transfer, Thermodynamics, Condensing heat exchanger, Gas water heater development
Software Knowledge : FEA, CFD, 1D, 2D simulation tools
Recommended fields:
Gas water heaters manufacturers, Heat Exchanger manufacturers, Technical universities or Engineering service providers for gas water heaters related business.
Job Code - ENC1/TT-STT/Heat Pump
Qualification : Ms or PhD (Mechanical) Experience : 5-8 years
Technical requirements:
1. Proven experience with concept, dimensioning & development of refrigeration system & its components in a product development environment is a must.
2. Design, calculation and specification of Heat Pump components from concept to industrialization phase is essential
3. Good knowledge of modeling and simulation tools for refrigeration systems and related components is a must
4. Experience in evaporator and condenser design and knowledge in the related dimensioning tools is required.
5. Good knowledge and experience in air flow calculation and fan impeller design, including CFD simulation tools is desirable
6. Knowledge of compressor engineering fundamentals is desirable.
Domain knowledge : Refrigeration, Heat Pump, Heat pump water heater development
Software Knowledge : CFD, 1D, 2D simulation tools
Recommended fields:
Heat Pump manufacturers, Heat Exchanger manufacturers, Technical universities or Engineering service providers for refrigeration related business.
Job Code - ENC1/TT /Plastic components
Qualification : BE (Mechanical) Experience: 4 to 6 years
Technical requirements:
1. Sound knowledge of handling assembly, sub - assembly & component level designs in a product development environment are a must.
2. Independently handle development and component design requirements by generating concepts and taking them through CAD & development cycle is essential.
3. Knowledge on GD&T and Tolerance stack up is essential.
4. Knowledge on Plastics and Tooling is a must.
5. Knowledge on Sheet metal will be an added advantage.
6. Sound knowledge of UG NX and Teamcentre.
Domain knowledge : Design of Plastic components
CAD Knowledge : UG NX4 and above, Solid edge V19, Team centre engineering
Recommended fields:
Renewable Energy, Solar energy, Engineering services firms.
Job Code - ENC1/TT /HVAC
Qualification : BE (Mechanical) Experience : 5 to 8 years
Technical requirements:
1. Sound Knowledge in UG NX 4/7.5 and Teamcenter Engineering
2. Working experience in part modeling, assembly, sheet metal, routing and drafting modules in UG
3. Experience in sheet metal design is essential
4. Knowledge on GD&T and Tolerance stack up is essential.
5. Knowledge on HVAC domain will be an added advantage.
6. Independently handle development and component design requirements by generating concepts and taking them through CAD & development cycle is essential.
Domain knowledge : Design of Sheet metal enclosures, air condition units
CAD Knowledge : UG NX4 and above, Solid edge V19, Team centre engineering
Recommended fields:
Refrigeration, Air conditioning, Engineering services firms.
Job Code - ENC1/BSH /System Engineer
Qualification : BE (Mechanical) Experience: 5 to 7 years
Technical requirements:
1. System requirement understanding, integration of subsystems and interdependencies like cooling to accessories to structural
2. Proven experience with design & development of refrigeration system & its components in a product development environment is a must.
3. Knowledge of refrigerator testing.
4. Simulation interfacing from system standpoint.
5. Design reviews tools and capabilities
6. Exposure to new product development life cycles
7. Understanding of various manufacturing & validation processes associated with Refrigerators system is desirable.
8. Sound knowledge of engineering fundamentals with co-relation of basic physics to engineering mechanisms is desirable.
Domain knowledge : Complete system knowledge of refrigerator development
Software Knowledge : UG CAD skills
Recommended fields:
Home Appliance manufacturer
Job Code - ENC1/BSH /Mechatronics
Qualification : BE/ME (Mechanical/Mechatronics) Experience: 4 to 7 years
Technical requirements:
1. Proven experience with design & development of Electrical & Electronics components such as LED-Circuits, Defrost heating control, motors
2. Good knowledge in wire harness.
3. Desirable to have wire harness design using CAD software.
4. Knowledge of Microcontrollers
5. Understanding of various manufacturing & validation processes associated with Refrigerators system is desirable.
6. Sound knowledge of engineering fundamentals with co-relation of basic physics to engineering mechanisms is desirable.
Domain knowledge : Knowledge of electrical & electronic control circuits in Home appliances
Software Knowledge : Wire harness module in UG or Pro-e
Recommended fields:
Home Appliance manufacturers
Job Code - ENC1/BSH /Cooling Engineer
Qualification : BE (Mechanical) Experience : 3 to 6 years
Technical requirements:
1. Proven experience with design and development of refrigeration cooling system & its components in a product development environment is a must.
2. Proven experience in Heat load calculation
3. Knowledge of proto making
4. Understanding of various manufacturing & validation processes associated with Refrigerators system is desirable.
5. Sound knowledge of engineering fundamentals with co-relation of basic physics to engineering mechanisms is desirable.
Domain knowledge : Cooling circuit design of refrigerator
Software Knowledge : UG
Recommended fields:
Refrigerator manufacturers, cooler manufacturers, Service providers for refrigeration related business.
Job Code - ENC1/BSH /Design Engineer
Qualification : BE (Mechanical) Experience : 3 to 6 years
Technical requirements:
1. Proven experience with design & development of home appliance system & its components in a product development environment is a must.(Preferably Refrigerator, Ovens, Washing machine)
2. Design of structural and aesthetic components of from concept development to manufacturing drawing release is essential
3. Good CAD knowledge in handling assembly, GD & T, plastic parts design is a must
4. Understanding of various manufacturing & validation processes associated with Home appliance system is desirable.
5. Sound knowledge of engineering fundamentals with co-relation of basic physics to engineering mechanisms is desirable.
Domain knowledge : Home appliance product Development, Manufacturing
Software Knowledge : UG or Pro-e
Recommended fields:
Refrigerator manufacturers, oven, visi cooler manufacturers, Service providers for refrigeration, oven, burner, related business.
Job Code - ENC2/Product design ( Unigraphics)
Qualification : Bachelor Degree in Mechanical / Automobile / Production with good academics
Experience : 3 to 5 years of experience, most preferable would be with automobile industry experience
Requirements:
1. Knowledge and work experience in Automobile components / Products
2. Required Software Skills: Unigraphics / Pro-E and Wind-chill
3. Candidate should have good Technical knowledge
4. Knowledge of Manufacturing processes, Die Cast and Injection Mold process
5. Should have experience working with overseas customer
6. Exposure to German Language will be an added advantage
7. Good knowledge in GD&T
Job Code - ENC2/Reverse Engineering and Benchmarking
Qualification : Bachelor Degree in Mechanical / Automobile / Production with good academics
Experience : 3 to 5 years of experience, most preferable would be with automobile industry experience.
Requirements:
1. Knowledge and work experience in Automobile components / Products
2. Required Software Skills: Unigraphics / Pro-E and Wind-chill
3. Candidate should have good Technical knowledge
4. Knowledge of Manufacturing processes, Die Cast and Injection Mold process
5. Knowledge on Reverse Engineering and Benchmarking processes
6. Good knowledge on cost estimation
7. Should have experience working with overseas customer
8. Good knowledge in GD&T
Job Code - ENC2/ZFLS
Qualification : Bachelor Degree or Diploma in Mechanical / Automobile with good academic background.
Experience : 3 to 5 years of experience in designing EPS Rack, Pinion Steering Gears & enclosures for Steering Gears.
Tasks:
1. To develop Concept design
2. Steering system Packaging assemblies and analysis
3. Tolerance stack-up analysis
4. Design Modifications
5. To create 3D models and 2D drawings in ProE
Requirements:
1. Knowledge and work experience in Automobile components / Products, preferably in steering systems.
2. Candidate should have good Technical skills with reference to cast and machined parts, manufacturing and assembly processes.
3. Good Knowledge in GD&T.
4. Knowledge on Programming skills would be preferable
5. CAD tool: Pro-e (Wildfire-4) minimum 3000hrs hands on exposure
Job Code - ENC2/ ATMO
Qualification : Bachelor Degree in Mechanical / Automobile / Production with good academic background.
Experience : 2 to 3 years of experience in the field of standard parts modeling, Machine Design, Assembly line of Auto components.
Tasks:
1. Creation of assembly line machine concepts
2. Design of Fixtures
3. Catalogue part creation
4. Creation of 3D modeling and 2D manufacturing drawings
Requirements:
1. Candidate should have good Technical skills.
2. Good knowledge of manufacturing processes, GD&T.
CAD Skills: Should be good in Inventor.
Job Code - ENC2/ED-Specialist
Qualification : B.E in Mechanical Engineering or Industrial Engineering
Experience : 6 - 10 years of experience in the area of Plastic parts design and manufacturing.
Requirements:
1. Hands on experience in design of complex Plastic parts and manufacturing
2. Knowledge of GD&T and Tolerance Stack-up.
3. Should be able to handle the project independently
4. Knowledge of German language.
5. Knowledge of CAD Tool CATIA V5
Job Description:
Technology coordinator for plastic parts
1. Coordination with design, materials and manufacturing teams.
2. Identify and interpret the manufacturing implications.
3. Project Planning and Co-ordination with tooling development for component development.
4. Design Reviews, DFMEA, and Design Validation with cross functional team.
5. Interaction with offshore team.
Job Code - ENC2/ED-Engineers
Qualification : B.E in Mechanical Engineering or Industrial Engineering/ Diploma.
Work experience: 3 - 4 years of experience in the area of Plastic parts design and manufacturing
Requirements:
1. Experience in design of complex Plastic parts and manufacturing
2. Knowledge of GD&T and Tolerance Stack-up.
3. GoodKnowledge of CAD Tool CATIA V5
4. Knowledge of German is an added advantage
Walk-ins @ Bangalore:
Job Code- ECU/ Specialist/Tool Design Engineer (Plastic injection mold Design)
Qualification : Graduation in Mechanical Engineering with Post Diploma in Plastics Mould Technology from CIPET/NTTF/GTTC
Work experience: 5 to 8 years of hands on experience in design & development of transfer molds/Injection Molds.
Requirements:
1. Simulation experience with Moldflow or alternative filling simulation tool .
2. Experience with Mold material (transfer molding material would be best, injection molding material is also acceptable).
3. Deep machine/tooling know-how (must have already designed tooling for transfer molding or injection molding)
4. Process knowhow on transfer molding or injection molding
5. Must be able to guide technicans working on the mold machine
6. Must be able to give the right inputs to design/construction from machine side ("what is feasible")
7. Thorough Knowledge in Plastics
8. Proficient in Pro/Engineer WF4.0
Job Code/EIA/ PLC Programmers
Qualification : BE / B.Tech. (EEE, ECE, Instrumentation)
Work experience : 2 - 7 Yrs Experience
Core Responsibilities:
1. Programming of function blocks for various PLCs viz. EDC, Siemens, Rockwell (AB), 3-S Plcs (Rexroth, Beckhoff) etc.
2. Test / User Documentation / Maintenance of the function blocks
Requirements:
1. Sound Knowledge on IEC - 61131-3 PLC programming languages (ST, LD, FBD, SFC, IL)
2. Thorough understanding of PLC Architecture, Scan times and Task handling.
3. Extensively worked on Functions & Function blocks.
4. Hands on Experience in programming Motion Controllers, Servo Amplifiers & Servo Motors, VFDs
5. Knowledge of Industrial Field buses like SERCOS, Profibus, Device-Net, MODBUS etc.
6. German Language knowledge is added advantage.
Send the updated resume to: Buddy.r...@in.bosch.com<mailto:Buddy.r...@in.bosch.com>
Please note: The subject line should read as follows - e.g. PLC Programmers - 3yrs - Bangalore(requirement) (Skill) e.g. Motion Controllers, then experience - e.g. 3 yrs and finally the location for which you are referring the candidate e.g. Bangalore.
Regards,
Buddy Referral
.
[cid:image0...@01CCA86D.37FE5C20]
--
With Regards,
T@jpeer H
Have Fun, always !!
Reply all
Reply to author
Forward
0 new messages