Tar Folder _VERIFIED_ Download
Jenniffer Trotter
Having accomplished my objective, I decided to uninstall Dropbox. No error messages during installation or uninstallation. However, after it was uninstalled I discovered that my computer was extremely seriously messed up. Now the Documents folder has been moved down into a subdirectory of Dropbox. The new directory structure looks like this:
By the way, the proposed solution became even worse than I thought it was. Discovered another program that was spawning new folders in the original place, so now it becomes necessary to reconcile versions between two subdirectories and I need to know how the OTHER program handles the file system.
My folder is a client and the boards are the various elements of a complex project
My CRM has a board with all clients on it but not the detailed projects so I need to link the two and generate multiple folders for multiple projects.
I have a shared folder that was named "research" and that really turned into a folder to hold all my stuff on academia. It is shared across a few accounts that I control (not sure if that is important or not - I've had this happen with non-shared folders, as well). I renamed the folder from "research" to "academia". This has kicked off what appears to be a re-download of all the files in that folder on all computers that have this folder into a folder of the new name. Is this really what is happening? If so, shouldn't there be a way to adjust the name without having it become an entirely new folder and so force a new download of the entire thing?
This might be related to a phenomenon that I've seen when I bring a computer back online that has been off for a long time (more than a month, not sure where the cutoff is). I have done similar renaming of folders that contain lots of files while one of my machines is off, and when I eventually bring up a computer that has the old name for the folder, not the new one, it consistently fails to detect that a rename occurred and so uploads the entire contents of the folder with the old name, and then downloads the entire contents of the folder with the new name. This appears to also indicate that the identity of a given folder is not maintained separate from the name. This makes a certain amount of sense, but I wonder if there isn't something you could do about it?
Anyway. Any help understanding what is going on here would be appreciated. I have started to be gunshy about renaming folders in dropbox because I'm wary of having to clean up when I bring up a backup partition or machine I haven't used for a while that will not deal correctly with the rename. And, it is annoying to have it take hours to deal with a rename, as well (I renamed this folder about 2 hours ago, and it is still not finished processing on the local computer where I made the change).
A rename on your operating system is seen as a deletion of one folder and an add of another. When this happens Dropbox will re-index the entire content and while doing so it will appear as though it's uploading and/or downloading, but it really isn't. Only files that have actually changed will be transferred. This process can take a long time, especially for large folders or folders with a lot of files.
In addition, when you rename a shared folder, Dropbox will also indicate that you've left the share but will then say that you've rejoined the share. This is also normal. Another item of note with shared folders is that anyone can rename a shared folder to anything they want, and it WILL NOT be renamed on the other accounts that have the same share. This allows people to name their shares however they want, without it impacting all other members.
Thanks for the information. Makes sense. Interesting that with the shared folder rename, it didn't automatically rename on some of my computers (as you described, and as I expected), but it did on others.
BUT - the new path must still be a local directory for each Portal machine (not a network share) and the update wont create or populate the new folder - you need to do that first - on both machines in an HA site.
However, the workflow we sometimes have is to start without a template and then save later if the project is something that needs to be saved. When you follow that path, you do not get the option to not create a folder for the project.
I'm doing some maintenance on our Enterprise machines, and I happened to notice that some of the directories in our ArcGIS Server machine were not clearing out automatically. This meant that the output folder was getting quite large, when it should have been dropping files older than 10 minutes.
It also appears to have no cleanup mode defined, which would imply that this folder is not meant to be cleared out. But I don't really understand what these source files are doing, if anything, and can't find any good documentation that explains it in more detail.
So the input folder is used by server to store source copies of the services that you publish from a registered data-store location, e.g. from a file gdb in a registered folder or an sde connection registered as a database in the server data store.
The domain arcgisserver system account handles all writes to the input folder when you publish or overwrite a service, not users. When you delete a map service, the service's input folder and subfolders should be deleted as well. If the input service name folder and subfolders do not delete when you delete a map, image or gp service, then you have or had other problems, probably related to sharing, where the arcgis server domain account could not fully access all the directories.
For the output folder, all files created by the arcgis server service account (via the REST endpoint are cleared out by the time set, usually 10 minutes. What I have found is files in the output directory that are not auto-cleaned are lyr files created by SOAP when someone at sometime connected to a service in ArcMap.
if no then the service is copying the data.
so if your data is not on the server make sure you are using a domain service account for ArcGIS and that the folder is registered as a network share and that the service account has access to it
That makes sense, and obviously following the "proper" procedure for deleting stuff is the way to go. I'm just trying to understand how this folder is actually functioning, though. If my hosted layer is in DataStore, is anything actually looking at or using these reference files/folders? It doesn't look like the files have been modified since their original publish date.
Creates a shortcut to the provided Drive item ID and resource key, and returns it. A resourcekey is an additional parameter that needs to be passed to access the target file or folder thathas been shared using a link.
Drive requires a resource key to access some files or folders that have been shared using alink. This change is part of a security update. The update is turned on by default for eligiblefiles and folders. To turn the resource key requirement on or off for eligible files, usesetSecurityUpdateEnabled.
Gets whether this Folder requires a resource key for access when it'sshared using a link. This requirement is turned on by default for eligible files and folders.To turn the resource key requirement on or off for eligible files, use setSecurityUpdateEnabled.
Gets a collection of all files that are children of the current folder and match the given searchcriteria. The search criteria are detailed in the Google Drive SDK documentation. Note that the Driveservice uses v2 of the Drive API and some query fields differ from v3. Review the fielddifferences between v2 and v3.
Gets a collection of all folders that are children of the current folder and match the given searchcriteria. The search criteria are detailed in the Google Drive SDK documentation. Note that the Driveservice uses v2 of the Drive API and some query fields differ from v3. Review the fielddifferences between v2 and v3.
Removes the given file from the current folder. This method does not delete the file, butif a file is removed from all of its parents, it cannot be seen in Drive except by searchingfor it or using the "All items" view.
Removes the given folder from the current folder. This method does not delete the folderor its contents, but if a folder is removed from all of its parents, it cannot be seen in Driveexcept by searching for it or using the "All items" view.
We have a Xerox C7020. We scan documents to a folder that need to be single files. We have this set up, but it creates a folder that these files are in. Unfortunately, this can't work as this folder is automatically read by some software so the files just need to land in there.
Hi
I have collections imported into my Postman. Now I have created a new Collection and created a folder under it. I now would want to move the existing collection into this newly created folder. Is that even possible in Postman?
So I have a folder titled "data" at the top level of the default data folder. I can see this folder and it's contents on my Windows machine that I have mapped to the NAS, but in the Shares page on the NAS I can't see this folder. I'm also having trouble accessing the folder from my Linux machine. I have included a screenshot that should help with what I'm trying to explain.
So I have a folder titled "data" at the top level of the default data folder. I can see this folder and it's contents on my Windows machine that I have mapped to the NAS, but in the Shares page on the NAS I can't see this folder.
So I know that you're referring to the main data folder. Which houses my documents, home folder, and other things. But INSIDE the data folder, I have a data folder. I used to be able to see it, but something happened recently where I can not see it anymore. I also used to be able to access it from my linux machine just fine, but now I'm getting an error message, which I've included in the picture.
df19127ead