ebbtideyachts

Hi Paddy . I own a 36 ft Ebbtide too. On Sun, 19 Jan 2025, 12:33 am yacht.c...@gmail.com, <yacht.

Hi Bill, I'm also thinking of doing the same. Would appreciate if you could forward a copy of the

Hi Ben, Jenain was really spartan on our first few voyages, only kerosene lights, no instruments,

Hi Ben, Yes, the Sikaflex is more than sufficient. When I changed the original ports on Jenain, I had

Hi Ben, Yes, it was sometime in 1994 when Jenain was being built, that Dudley drew the rudder plans.

Hi Ben, I did a lot of the SS work on Jenain. It is easy to weld SS to mild steel, using either an AC

Hi Ben, Herewith the next batch.

Hi Ben, Heaving to, is one of the things that long keeled boats do really well. By the time it is

Hi Bill, Thanks will do that. Really appreciate your advice. I'll take some photos for the group

Looks great Bill. On Thursday, 9 July 2015 12:54:27 UTC+10, jenai...@yahoo.com wrote:

Hi Ben, Yes, with the miles and the years, one is forced to learn a lot. I look forward to sharing

Hi Brent, You will love your Ebbtide, they are truly great sea boats, tough and seaworthy. Although

Hi Brent, Bill is dead right about long keel boats not going astern. As Bill says take it slow and

Hi Brent, Going astern with any long keeled yacht is not easy. You need to hold the tiller very

Hi Bill, Good shot of her under sail. Cold here so I'm hid inside with the fire chucking out the

Hi Guys, Just a belated Merry Christmas from me. There are rather strong East winds here in Phuket. I

Hi Chris and Paddy, Yes, a spinaker pole puts a huge load on the mast fitting. I sailed across the

Hi Paddy, I've taken Moontide to the Caribbean twice since her launch in 2002. She has looked

As far as I know there is'nt a group dedicated to Eddtides, and now there is! And as a first post