Debugging Windows 10 Upgrade

46 views
Skip to first unread message

Clayton, Robert

unread,
Nov 7, 2018, 11:31:28 AM11/7/18
to earthwo...@googlegroups.com

I just switched earthworm to a new computer running Windows 10 and ew7.9, and am having some problems.  The computer has the same I.P. and ports, and I'm using the same parameter files.


1) The Webtronics digitizer is blinking 3 times per second.  What does this mean?  (I can't find any info on the web).

2) Adsend status shows as "NoExec"

3) Waveserver listens for a bit, then quits.

4) Statmgr gives log message: "statmgr msg from unknown module  (statmgr doesn't have a .desc file for this one)"


Hints on how to diagnose what's wrong?


Thanks...... -=- Robert Clayton -=-

BYU-Idaho Geology Dept., network "Ricks"

Larry Cochrane

unread,
Nov 7, 2018, 2:17:45 PM11/7/18
to earthwo...@googlegroups.com
Hi Robert,

On 11/7/2018 8:31 AM, Clayton, Robert wrote:
> I just switched earthworm to a new computer running Windows 10 and ew7.9, and am
> having some problems.  The computer has the same I.P. and ports, and I'm using the
> same parameter files.
>
>
> 1) The Webtronics digitizer is blinking 3 times per second.  What does this mean?  (I
> can't find any info on the web).

This means the digitizers is not communicating with the PsnAdSend module. The LED
should blink at a 1Hz rate once you get the module talking to the digitizer.

>
> 2) Adsend status shows as "NoExec"

You should be running my PsnAdSend module, not the Adsend module.

Check the PsnAdSend log file. My guess is the module is not seeing the digitizer do
to a Comm Port number change from your old system. The first thing to do is open the
Device Manager and check that the system has assigned a Comm Port to the digitizer.
If you are using a serial port on the system they normally are assigned device names
like COM1, COM2 etc. You may need to install a USB driver if you are using a USB ADC
board or a Serial to USB adapter. The USB version of my digitizer used a FTDI USB
chip. You can download the driver from here
https://www.ftdichip.com/Drivers/VCP.htm. Once the system sees the digitizer update
the PsnAdSend.d file with the correct Comm Port number.

>
> 3) Waveserver listens for a bit, then quits.
>
> 4) Statmgr gives log message: "statmgr msg from unknown module  (statmgr doesn't have
> a .desc file for this one)"

Can't help you here. As always check the log files... Until you get things working I
would do the following:

1. Disable the Windows firewall.
2. Disable any Anti-Virus programs.
3. Make sure you log into the system using an Administrator account. All of the EW
modules should be running with Admin privileges.

Good luck.

Regards,
Larry Cochrane
Webtronics

Robert Clayton

unread,
Nov 8, 2018, 10:04:04 AM11/8/18
to Earthworm Community Forum
I've just switched my earthworm to a new computer with Windows 10 and ew7.9, and am having some problems. I've used the same parameter files, the computer has the same IP address and ports.

1) The Webtronics digitizer is blinking 3 times per second. What does this mean?
2) The waveserver listens a bit, then terminates.
3) Statmgr gives this log message: "statmgr msg from unknown module (statmgr doesn't have a .desc file for this one)"
4) Adsend shows status "NoExec"

Hints on how to diagnose?

Thanks.... -=- Robert Clayton -=-

Clayton, Robert

unread,
Nov 9, 2018, 11:10:24 AM11/9/18
to earthwo...@googlegroups.com

Thanks for the help, Larry!


Solved those problems, still have others:

Sniffwave shows I'm recording data correctly, but Swarm can't show any data and it's not being exported.  I've checked that the correct ports are set up for incoming and outgoing data and I.P. addresses are correct.  I can ping the computer with no data loss from inside and outside our university network.


eqproc dies with log file error "eqproc: Output pipe error; exiting"

And so eqbuf logs the error "

20181109_UTC_15:51:05 pipe_put error from SendMsg in eqbuf
20181109_UTC_15:51:05 eqbuf: Output pipe error; exiting
20181109_UTC_15:51:22 Error releasing the mutex semaphore."

Heli_ewII says error from Waveserver, but waveserverV doesn't log any errors.

It seems like there's just a problem getting data correctly out of the ring, but I don't know where to look from here.

I'd appreciate any hints & pointers!

-=- Robert Clayton -=-
BYU-Idaho

From: earthwo...@googlegroups.com <earthwo...@googlegroups.com> on behalf of Larry Cochrane <larr...@webtronics.com>
Sent: Wednesday, November 7, 2018 12:17:43 PM
To: earthwo...@googlegroups.com
Subject: Re: [Earthworm Forum] Debugging Windows 10 Upgrade
 
Hi Robert,

On 11/7/2018 8:31 AM, Clayton, Robert wrote:
> I just switched earthworm to a new computer running Windows 10 and ew7.9, and am
> having some problems.  The computer has the same I.P. and ports, and I'm using the
> same parameter files.
>
>
> 1) The Webtronics digitizer is blinking 3 times per second.  What does this mean?  (I
> can't find any info on the web).

This means the digitizers is not communicating with the PsnAdSend module. The LED
should blink at a 1Hz rate once you get the module talking to the digitizer.

>
> 2) Adsend status shows as "NoExec"

You should be running my PsnAdSend module, not the Adsend module.

Check the PsnAdSend log file. My guess is the module is not seeing the digitizer do
to a Comm Port number change from your old system. The first thing to do is open the
Device Manager and check that the system has assigned a Comm Port to the digitizer.
If you are using a serial port on the system they normally are assigned device names
like COM1, COM2 etc. You may need to install a USB driver if you are using a USB ADC
board or a Serial to USB adapter. The USB version of my digitizer used a FTDI USB
chip. You can download the driver from here
the PsnAdSend.d file with the correct Comm Port number.

>
> 3) Waveserver listens for a bit, then quits.
>
> 4) Statmgr gives log message: "statmgr msg from unknown module  (statmgr doesn't have
> a .desc file for this one)"

Can't help you here. As always check the log files... Until you get things working I
would do the following:

1. Disable the Windows firewall.
2. Disable any Anti-Virus programs.
3. Make sure you log into the system using an Administrator account. All of the EW
modules should be running with Admin privileges.

Good luck.

Regards,
Larry Cochrane
Webtronics

--
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.

To post to this group, send an email to earthwo...@googlegroups.com

To unsubscribe from this group, send an email to
earthworm_for...@googlegroups.com

For more options, visit this group at
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fgroups.google.com%2Fgroup%2Fearthworm_forum%3Fhl%3Den&amp;data=02%7C01%7C%7C593990d346054a17c1bd08d644e5b2ec%7Ce6ac1d1fd6954ef191d494cddef8be11%7C0%7C0%7C636772150678104211&amp;sdata=1u6DOePe7CU155QPUtnPYoS%2Fu161bze%2F3zScnOEWSmY%3D&amp;reserved=0

---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com.
For more options, visit https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.google.com%2Fd%2Foptout&amp;data=02%7C01%7C%7C593990d346054a17c1bd08d644e5b2ec%7Ce6ac1d1fd6954ef191d494cddef8be11%7C0%7C0%7C636772150678104211&amp;sdata=YBIS6V%2BLHlGH24b%2FoXNVOq1RjJ%2BWxIyYXYKBboloUzE%3D&amp;reserved=0.

Stefan Lisowski

unread,
Nov 16, 2018, 5:48:58 PM11/16/18
to earthwo...@googlegroups.com
You've got a number of questions, but not that much information to go on
for us to try and help you.

What is the error heli gets?

What does
getmenu <yourcomputer_hostname>:<waveserver port>
show when you run it?

Are you filtering out data that's coming into the wave server because
you are looking for data from one MOD_ but receiving it from another? If
you included the .d files and the error logs it might help.

for the eqproc, again logs and .d files would help

Stefan

On 11/9/2018 11:10 AM, Clayton, Robert wrote:
> Thanks for the help, Larry!
>
>
> Solved those problems, still have others:
>
> Sniffwave shows I'm recording data correctly, but Swarm can't show any
> data and it's not being exported.  I've checked that the correct ports
> are set up for incoming and outgoing data and I.P. addresses are
> correct. I can ping the computer with no data loss from inside and
> outside our university network.
>
>
> eqproc dies with log file error "eqproc: Output pipe error; exiting"
>
> And so eqbuf logs the error "
>
> 20181109_UTC_15:51:05 pipe_put error from SendMsg in eqbuf
> 20181109_UTC_15:51:05 eqbuf: Output pipe error; exiting
> 20181109_UTC_15:51:22 Error releasing the mutex semaphore."
>
> Heli_ewII says error from Waveserver, but waveserverV doesn't log any
> errors.
>
> It seems like there's just a problem getting data correctly out of the
> ring, but I don't know where to look from here.
>
> I'd appreciate any hints & pointers!
>
> -=- Robert Clayton -=-
> BYU-Idaho
>
> ------------------------------------------------------------------------
> *From:* earthwo...@googlegroups.com
> <earthwo...@googlegroups.com> on behalf of Larry Cochrane
> <larr...@webtronics.com>
> *Sent:* Wednesday, November 7, 2018 12:17:43 PM
> *To:* earthwo...@googlegroups.com
> *Subject:* Re: [Earthworm Forum] Debugging Windows 10 Upgrade
> http://groups.google.com/group/earthworm_forum?hl=en
>
> ---
> You received this message because you are subscribed to the Google
> Groups "Earthworm Community Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to earthworm_for...@googlegroups.com
> <mailto:earthworm_for...@googlegroups.com>.
> For more options, visit https://groups.google.com/d/optout.

Clayton, Robert

unread,
Nov 19, 2018, 10:17:06 AM11/19/18
to earthwo...@googlegroups.com

Stefan, 

here's what heli's error says:

20181119_UTC_14:58:36 heli_ewII (Main):  Unable to build menus from wave servers
 heli_ewII: Build_Menu:  Unexpected empty menu from  10.5.141.196:16022 < >
20181119_UTC_14:58:37 heli_ewII (Main):  Unable to build menus from wave servers
20181119_UTC_14:58:37 heli_ewII (Main):  Too many failures; aborting program


Here's waveservV.log:

-------------------------------------------------------
wave_serverV: startup at UTC_20181116_16:17:04
This program is using the MT-Safe version of logit.
-------------------------------------------------------

getmenu says "empty menu"

-=- Robert Clayton -=-

From: earthwo...@googlegroups.com <earthwo...@googlegroups.com> on behalf of Stefan Lisowski <stefanl...@isti.com>
Sent: Friday, November 16, 2018 3:48:52 PM
To: earthwo...@googlegroups.com
Subject: Re: [Earthworm Forum] Debugging Windows 10 Upgrade
 

>
> ---
> You received this message because you are subscribed to the Google
> Groups "Earthworm Community Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to earthworm_for...@googlegroups.com.
> For more options, visit

>
> --
> --
> You received this message because you are subscribed to the Google
> Groups "Earthworm Community Forum" group.
>
> To post to this group, send an email to earthwo...@googlegroups.com
>
> To unsubscribe from this group, send an email to
> earthworm_for...@googlegroups.com
>
> For more options, visit this group at

>
> ---
> You received this message because you are subscribed to the Google
> Groups "Earthworm Community Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send


--
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.

To post to this group, send an email to earthwo...@googlegroups.com

To unsubscribe from this group, send an email to
earthworm_for...@googlegroups.com

For more options, visit this group at


---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com.

Stefan Lisowski

unread,
Nov 19, 2018, 3:55:29 PM11/19/18
to earthwo...@googlegroups.com
Can you send your wave_serverV.d file? And also send some output from
sniffwave so we can see some channel names. sniffwave SOME_RING v
with the V so we can see what modules are sending the data to the ring.

On 11/19/2018 10:17 AM, Clayton, Robert wrote:
> Stefan,
>
> here's what heli's error says:
>
> 20181119_UTC_14:58:36 heli_ewII (Main):  Unable to build menus from wave
> servers
>  heli_ewII: Build_Menu:  Unexpected empty menu from  10.5.141.196:16022 < >
> 20181119_UTC_14:58:37 heli_ewII (Main):  Unable to build menus from wave
> servers
> 20181119_UTC_14:58:37 heli_ewII (Main):  Too many failures; aborting program
>
>
> Here's waveservV.log:
>
> -------------------------------------------------------
> wave_serverV: startup at UTC_20181116_16:17:04
> This program is using the MT-Safe version of logit.
> -------------------------------------------------------
>
> getmenu says "empty menu"
>
> -=- Robert Clayton -=-
>
> ------------------------------------------------------------------------
> *From:* earthwo...@googlegroups.com
> <earthwo...@googlegroups.com> on behalf of Stefan Lisowski
> <stefanl...@isti.com>
> *Sent:* Friday, November 16, 2018 3:48:52 PM
> http://groups.google.com/group/earthworm_forum?hl=en
>
> ---
> You received this message because you are subscribed to the Google
> Groups "Earthworm Community Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to earthworm_for...@googlegroups.com
> <mailto:earthworm_for...@googlegroups.com>.
> For more options, visit https://groups.google.com/d/optout.

Clayton, Robert

unread,
Nov 19, 2018, 4:40:54 PM11/19/18
to earthwo...@googlegroups.com

Here's sniffwave:

C:\earthworm\run_working\params>sniffwave WAVESCNL_RING v
Sniffing WAVESCNL_RING for wild.wild.wild.wild
GetType: Invalid message-type name <TYPE_MSEED>
sniffwave: WARNING: Invalid message type <TYPE_MSEED>! Missing from earthworm.d or earthworm_global.d
sniffwave: inRing flushed 1190 packets of 1028160 bytes total.
  CMI.EHZ.RC.-- (0x32 0x30) 1 i4 200 200.0 2018/11/19 21:37:21.10 (1542663441.1000) 2018/11/19 21:37:22.09 (1542663442.0950) 0x00 0x00 i14=INST_RICKS m66=MOD_PSNADSEND t19=TYPE_TRACEBUF2 len 864 [D: 0.1s F: 0.0s]
  CMI.EHZ.RC.-- (0x32 0x30) 1 i4 200 200.0 2018/11/19 21:37:22.10 (1542663442.1000) 2018/11/19 21:37:23.09 (1542663443.0950) 0x00 0x00 i14=INST_RICKS m66=MOD_PSNADSEND t19=TYPE_TRACEBUF2 len 864 [D: 0.1s F: 1.0s]
  CMI.EHZ.RC.-- (0x32 0x30) 1 i4 200 200.0 2018/11/19 21:37:23.10 (1542663443.1000) 2018/11/19 21:37:24.09 (1542663444.0950) 0x00 0x00 i14=INST_RICKS m66=MOD_PSNADSEND t19=TYPE_TRACEBUF2 len 864 [D: 0.1s F: 1.0s]

**********************

WaveserverV.d with some comments omitted:

#
#         Wave ServerV Configuration File 
#...
#
MyModuleId    MOD_WAVESERVERV # wave_server's module id
RingName      WAVESCNL_RING        # name of transport ring to get data from
LogFile       0                # 1=write log file to disk; 0=don't
                               # 2=write to module log but not stderr/stdout
HeartBeatInt  15               # seconds between heartbeats to statmgr
ServerIPAdr   10.5.141.196  # address of machine running wave_server: geops.geophys
ServerPort    16022            # port for receiving requests & sending waves
GapThresh     5              # threshhold for gap declaration 
                               # (in sampling periods)
#
SocketTimeout 30000  # Timeout length in MILLISECONDS for socket calls
                     # This is for calls sending responses back to the
                     # client. Values should be a few seconds, certainly
                     # less than one minute.
#ClientTimeout  90000 # Optional.  Not recommended feature but it does work.
                     # Timeout in MILLISECONDS for response from client. 
                     # Threads that have not heard anything from their client 
                     # in this period will exit.
                     # Comment out or set to -1 if you don't want to 
                     # kill threads of silent clients.


#... 

IndexUpdate   30                

# ...
#
TankStructUpdate 1
#
# The file where TANK structures are stored
#
TankStructFile  D:\wave_tank\p1000-1.str
#
# I open many files, one tracedata file for each SCN channel to serve
# At 500 bytes/second, 1 channel requires 41.2 megabytes per day.
# NOTE: Record size must be multiple of 4 bytes or wave_serverV will crash 
# with data misalignment. 
# Also, record size must not be greater than MAX_TRACEBUF_SIZ, currently 4096,
# (defined in tracebuf.h)
#                            *** SCNL format is required! ***
#          SCNL    Record       Logo                  File Size   Index Size       File Name     New       
#          names   size  (TYPE_TRACEBUF only)         (megabytes) (max breaks)     (full path)      Tank      
#Tank IRIG  --- RC --  1056   INST_WILDCARD MOD_WILDCARD 256 10000 f:\wave_tank\IRIG.tnk
Tank CMI   EHZ RC --  1056   INST_WILDCARD MOD_WILDCARD 256 10000 f:\wave_tank\CMI.tnk
... and the rest

From: earthwo...@googlegroups.com <earthwo...@googlegroups.com> on behalf of Stefan Lisowski <stefanl...@isti.com>
Sent: Monday, November 19, 2018 1:55:24 PM
To: earthwo...@googlegroups.com
Subject: Re: [Earthworm Forum] Debugging Windows 10 Upgrade
 

>>
>> ---
>> You received this message because you are subscribed to the Google
>> Groups "Earthworm Community Forum" group.
>> To unsubscribe from this group and stop receiving emails from it, send
>> an email to earthworm_for...@googlegroups.com.
>> For more options, visit

>>
>> --
>> --
>> You received this message because you are subscribed to the Google
>> Groups "Earthworm Community Forum" group.
>>
>> To post to this group, send an email to earthwo...@googlegroups.com
>>
>> To unsubscribe from this group, send an email to
>> earthworm_for...@googlegroups.com
>>
>> For more options, visit this group at

>>
>> ---
>> You received this message because you are subscribed to the Google
>> Groups "Earthworm Community Forum" group.
>> To unsubscribe from this group and stop receiving emails from it, send
>> an email to earthworm_for...@googlegroups.com
>> <mailto:earthworm_for...@googlegroups.com>.

>
> --
> --
> You received this message because you are subscribed to the Google
> Groups "Earthworm Community Forum" group.
>
> To post to this group, send an email to earthwo...@googlegroups.com
>
> To unsubscribe from this group, send an email to
> earthworm_for...@googlegroups.com
>
> For more options, visit this group at

>
> ---
> You received this message because you are subscribed to the Google
> Groups "Earthworm Community Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to earthworm_for...@googlegroups.com.
> For more options, visit

>
> --
> --
> You received this message because you are subscribed to the Google
> Groups "Earthworm Community Forum" group.
>
> To post to this group, send an email to earthwo...@googlegroups.com
>
> To unsubscribe from this group, send an email to
> earthworm_for...@googlegroups.com
>
> For more options, visit this group at

>
> ---
> You received this message because you are subscribed to the Google
> Groups "Earthworm Community Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to earthworm_for...@googlegroups.com
> <mailto:earthworm_for...@googlegroups.com>.


--
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.

To post to this group, send an email to earthwo...@googlegroups.com

To unsubscribe from this group, send an email to
earthworm_for...@googlegroups.com

For more options, visit this group at


---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com.

Stefan Lisowski

unread,
Nov 19, 2018, 4:50:27 PM11/19/18
to earthwo...@googlegroups.com
Can you try put in
LogFile 1
to see if we can get more logging?

1056 is greater than your packet size of 864, but just to test try
changing 1056 to the maximum size of a Tracebuf, 4096.

Also, if you make any changes to the wave server v file, best practice
is to:

- shut down wsv
- delete the index .str files
- delete ALL the tank files (yes, if you have any data collected, you'll
lose it all here)
- start wsv back up

config changes you make may not be picked up if you don't delete the
tanks and struct files.

Stefan
> ------------------------------------------------------------------------
> *From:* earthwo...@googlegroups.com
> <earthwo...@googlegroups.com> on behalf of Stefan Lisowski
> <stefanl...@isti.com>
> *Sent:* Monday, November 19, 2018 1:55:24 PM
> http://groups.google.com/group/earthworm_forum?hl=en
>
> ---
> You received this message because you are subscribed to the Google
> Groups "Earthworm Community Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to earthworm_for...@googlegroups.com
> <mailto:earthworm_for...@googlegroups.com>.
> For more options, visit https://groups.google.com/d/optout.

Clayton, Robert

unread,
Nov 19, 2018, 5:26:21 PM11/19/18
to earthwo...@googlegroups.com

Okay, some progress, but still can't view data.  No errors in export log (to Montana).


Made the suggested changes, here's sniffwave:


C:\earthworm\run_working\params>sniffwave WAVESCNL_RING v
Sniffing WAVESCNL_RING for wild.wild.wild.wild
GetType: Invalid message-type name <TYPE_MSEED>
sniffwave: WARNING: Invalid message type <TYPE_MSEED>! Missing from earthworm.d or earthworm_global.d
sniffwave: inRing flushed 441 packets of 204624 bytes total.
  CMI.EHZ.RC.-- (0x32 0x30) 1 i4 100 100.0 2018/11/19 22:20:09.60 (1542666009.6000) 2018/11/19 22:20:10.59 (1542666010.5900) 0x00 0x00 i14=INST_RICKS m66=MOD_PSNADSEND t19=TYPE_TRACEBUF2 len 464 [D: 0.2s F: 0.0s]

 **********************

Here's waveserverV.log, now creating tanks (I had a typo in the tanks directory path):


-------------------------------------------------------
wave_serverV: startup at UTC_20181119_22:19:59
This program is using the MT-Safe version of logit.
-------------------------------------------------------
NOTE: This is the post-v5.2 patch to not write the empty tank messages
wave_serverV: Read command file <wave_serverV.d>
20181119_UTC_22:19:59 wave_serverV.c:Version 5.1.45 - 2014-03-31
20181119_UTC_22:19:59 serve_trace.c:Version 1084816782
20181119_UTC_22:19:59 index_util.c:Version 0978978930
20181119_UTC_22:19:59 server_thread.c:Version 1160412407
20181119_UTC_22:19:59 wave_serverV: Debug, sent heartbeat message: 1542665999 8104

20181119_UTC_22:19:59 wave_serverV: Created d:\wave_tank\CMI.tnk
20181119_UTC_22:20:06 BuildIndex(): First write for tank: CMI,EHZ,RC,--
20181119_UTC_22:20:06 wave_serverV: Debug, sent heartbeat message: 1542666006 8104


*********************

Swarm still can't connect and show CMI's waves.  It is looking for Earthworm server, as suggested.

Sent: Monday, November 19, 2018 2:50:22 PM
To: earthwo...@googlegroups.com
Subject: Re: [Earthworm Forum] Debugging Windows 10 Upgrade
 

>>>
>>> ---
>>> You received this message because you are subscribed to the Google
>>> Groups "Earthworm Community Forum" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to earthworm_for...@googlegroups.com.
>>> For more options, visit

>>>
>>> --
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Earthworm Community Forum" group.
>>>
>>> To post to this group, send an email to earthwo...@googlegroups.com
>>>
>>> To unsubscribe from this group, send an email to
>>> earthworm_for...@googlegroups.com
>>>
>>> For more options, visit this group at

>>>
>>> ---
>>> You received this message because you are subscribed to the Google
>>> Groups "Earthworm Community Forum" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to earthworm_for...@googlegroups.com
>>> <mailto:earthworm_for...@googlegroups.com>.

>>
>> --
>> --
>> You received this message because you are subscribed to the Google
>> Groups "Earthworm Community Forum" group.
>>
>> To post to this group, send an email to earthwo...@googlegroups.com
>>
>> To unsubscribe from this group, send an email to
>> earthworm_for...@googlegroups.com
>>
>> For more options, visit this group at

>>
>> ---
>> You received this message because you are subscribed to the Google
>> Groups "Earthworm Community Forum" group.
>> To unsubscribe from this group and stop receiving emails from it, send
>> an email to earthworm_for...@googlegroups.com.
>> For more options, visit

>>
>> --
>> --
>> You received this message because you are subscribed to the Google
>> Groups "Earthworm Community Forum" group.
>>
>> To post to this group, send an email to earthwo...@googlegroups.com
>>
>> To unsubscribe from this group, send an email to
>> earthworm_for...@googlegroups.com
>>
>> For more options, visit this group at

>>
>> ---
>> You received this message because you are subscribed to the Google
>> Groups "Earthworm Community Forum" group.
>> To unsubscribe from this group and stop receiving emails from it, send
>> an email to earthworm_for...@googlegroups.com
>> <mailto:earthworm_for...@googlegroups.com>.

>
> --
> --
> You received this message because you are subscribed to the Google
> Groups "Earthworm Community Forum" group.
>
> To post to this group, send an email to earthwo...@googlegroups.com
>
> To unsubscribe from this group, send an email to
> earthworm_for...@googlegroups.com
>
> For more options, visit this group at

>
> ---
> You received this message because you are subscribed to the Google
> Groups "Earthworm Community Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to earthworm_for...@googlegroups.com.
> For more options, visit

>
> --
> --
> You received this message because you are subscribed to the Google
> Groups "Earthworm Community Forum" group.
>
> To post to this group, send an email to earthwo...@googlegroups.com
>
> To unsubscribe from this group, send an email to
> earthworm_for...@googlegroups.com
>
> For more options, visit this group at

>
> ---
> You received this message because you are subscribed to the Google
> Groups "Earthworm Community Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to earthworm_for...@googlegroups.com
> <mailto:earthworm_for...@googlegroups.com>.


--
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.

To post to this group, send an email to earthwo...@googlegroups.com

To unsubscribe from this group, send an email to
earthworm_for...@googlegroups.com

For more options, visit this group at


---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com.

Clayton, Robert

unread,
Nov 19, 2018, 5:29:07 PM11/19/18
to earthwo...@googlegroups.com

Update:   Success!  


Just have to check with Mike Stickney that he's receiving CMI data.


Thanks to all!       


-=- Robert Clayton -=-

BYU-Idaho Geology Dept.

From: earthwo...@googlegroups.com <earthwo...@googlegroups.com> on behalf of Clayton, Robert <Clay...@byui.edu>
Sent: Monday, November 19, 2018 3:26:18 PM


---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Reply all
Reply to author
Forward
0 new messages