Creaking.
4 views
Skip to first unread message
ea
Apr 15, 2008, 4:02:29 PM4/15/08
to Dynamic Bicycles User Group
After replacing the shaft, I'm getting some creaking from the crank
area. I've greased up the screws for the gearbox, which helped a
little, but still getting creaking. I'm thinking I need to do
something with the cranks.
area. I've greased up the screws for the gearbox, which helped a
little, but still getting creaking. I'm thinking I need to do
something with the cranks.
ea
Apr 29, 2008, 4:30:23 PM4/29/08
to Dynamic Bicycles User Group
So, new cranks came in, got those installed, and greased 'em up.
Probably could have a couple more places to add some grease, but
didn't have any terrible creaking on the way in this morning. So
that's good.
Probably could have a couple more places to add some grease, but
didn't have any terrible creaking on the way in this morning. So
that's good.
ea
May 1, 2008, 11:00:43 AM5/1/08
to Dynamic Bicycles User Group
I think I know the source of the creaking: the bottom bracket/drive
shaft assembly. Didn't grease that up at all when I installed it.
Will have to take it off to get grease on it.
shaft assembly. Didn't grease that up at all when I installed it.
Will have to take it off to get grease on it.
ea
May 5, 2008, 5:42:45 PM5/5/08
to Dynamic Bicycles User Group
Took the shaft assembly out, greased it up, put it back on, and no
creaking. Sweet. I did notice that my seals are all bad though. No
idea if I get get those replaced or fixed.
creaking. Sweet. I did notice that my seals are all bad though. No
idea if I get get those replaced or fixed.
ea
Jun 16, 2008, 4:48:38 PM6/16/08
to Dynamic Bicycles User Group
And back to creaking again. Not sure when I'm gonna get around to
getting some grease down there.
getting some grease down there.
Reply all
Reply to author
Forward
0 new messages