Cutting Order

[mi...@sulley.info]

Is it possible to set or change the order in which cuts will be made?  I have looked through the documentation and can't see anything.

Thanks

Mick

[Christian Kohlöffel]

Yes it is. Don’t use the optimisation and check the Layer Listbox left. There you can change the order.

 

Regards

Christian

--
--
You received this message because you subscribed to the Google
Groups-group "dxf2gcode-users".
To post a message, send mail to dxf2gco...@googlegroups.com
To unsubscribe, send mail to dxf2gcode-use...@googlegroups.com
See http://groups.google.de/group/dxf2gcode-users?hl=en for more options
and the dxf2gcode project page at http://code.google.com/p/dxf2gcode/
---
You received this message because you are subscribed to the Google Groups "dxf2gcode-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dxf2gcode-use...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dxf2gcode-users/5f989a54-4ab6-41bc-9901-bf0e59c9552fn%40googlegroups.com.

[Mick Sulley]

Hi Christian,

Got it!  Thank you.

Mick

You received this message because you are subscribed to a topic in the Google Groups "dxf2gcode-users" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/dxf2gcode-users/g_tiPpKm8QA/unsubscribe.
To unsubscribe from this group and all its topics, send an email to dxf2gcode-use...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dxf2gcode-users/000401d7bd31%240783bc00%24168b3400%24%40googlemail.com.