Loaded 86 entity geometries; reduced to 19 contours

[Zachary Gudz]

Hello, 

I am trying to separate 2 different types of cuts I want to set up with different parameters in the same g-code file. 

The shape 0 attached has pulled 4 lines that should be part of the different cut depth, so I am unable to edit their parameter independent of the outer contour. 

I think the main issue is that the geometries are automatically reduced to 19 contours/shapes that I can't control which geometry is part of what shape. Is there a way to split this shape into additional shapes that I can edit the parameters independently? 

At the end of the day i would like to set different parameters for cut lines and crease line for 2 tools. 

Thanks,

Zach

[Christian Kohlöffel]

They are combined to one contour. You may put them on two layers in your dxf file.

 

Regards

Christian

--
--
You received this message because you subscribed to the Google
Groups-group "dxf2gcode-users".
To post a message, send mail to dxf2gco...@googlegroups.com
To unsubscribe, send mail to dxf2gcode-use...@googlegroups.com
See http://groups.google.de/group/dxf2gcode-users?hl=en for more options
and the dxf2gcode project page at http://code.google.com/p/dxf2gcode/
---
You received this message because you are subscribed to the Google Groups "dxf2gcode-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dxf2gcode-use...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dxf2gcode-users/dd96cf8b-ff19-438d-a2fb-7d8a6e1ec064n%40googlegroups.com.

[Zachary Gudz]

Ok, thanks Chistian. 

For anyone pulling dxfs out of artios CAD, you may need to change the "tuning file" for the export to allow for multiple layers to be created in the dxf. 

Zach

You received this message because you are subscribed to a topic in the Google Groups "dxf2gcode-users" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/dxf2gcode-users/aKhfHm4TReM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to dxf2gcode-use...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dxf2gcode-users/002101d7220a%241cf67450%2456e35cf0%24%40googlemail.com.