cant start dxf2gcode - cx_Freeze: Python error in main script

[nicolai rutkevich]

Hi everybody!

I have installed the dxf2gcode. Managed to run it once. Exited. Installed Camotics... Couldn't start the dxf2 again, receiving this error. Please help.

[Christian Kohlöffel]

Hi Nicolai,

 

we had the same failure here already:

https://groups.google.com/forum/?hl=en#!topic/dxf2gcode-users/ksQralbDPtQ

 

I think only a new Installation of Python will help.

 

Regards

Christian

--
--
You received this message because you subscribed to the Google
Groups-group "dxf2gcode-users".
To post a message, send mail to dxf2gco...@googlegroups.com
To unsubscribe, send mail to dxf2gcode-use...@googlegroups.com
See http://groups.google.de/group/dxf2gcode-users?hl=en for more options
and the dxf2gcode project page at http://code.google.com/p/dxf2gcode/
---
You received this message because you are subscribed to the Google Groups "dxf2gcode-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dxf2gcode-use...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

 

[nicolai rutkevich]

Hi Christian!

Thank you very much for your reply!

I have discovered what was it. I have an OpenGL card. and i obviously checked it in the settings. That feature made it stop working (as i said - i have ran it once before it stopped working). So reverting the system (with the system restore) - the uninstall didn't clear off the settings - I couldn´t find where are they stored...

Thanks again! Great piece of software!

[nicolai rutkevich]

<solved>

On Wednesday, December 27, 2017 at 9:36:16 PM UTC-2, nicolai rutkevich wrote:

[Leandro de Lucas]

Hi.

First, sorry about the english. It´s not my language.

The uninstall process don´t clear the settings because they are salved in .config dir, on the user directorie (~/.config/dxf2gcode).

You no need restore all your system. You can edit the cfg file or erase it and re-intall dxf2gcode.

[Leandro de Lucas]

Hi.

First, sorry about the english. It´s not my language.

The uninstall process don´t clear the settings because they are salved in .config dir, on the user directorie (~/.config/dxf2gcode). (Even on Windows)

You no need restore all your system. You can edit the cfg file or erase it and re-intall dxf2gcode.

Em terça-feira, 15 de maio de 2018 14:02:46 UTC-3, Leandro de Lucas escreveu:

Hi.

First, sorry about the english. It´s not my language.

The uninstall process don´t clear the settings because they are salved in .config dir, on the user directorie (~/.config/dxf2gcode). (Even on Windows)

[Hans Rudolf Studer]

Hi,

Lösung:  Solution:

 

• Config.cfg suchen    Search Config.cfg
  in C:\Users\USERNAME\.config\dxf2gcode\config
  
  

• Config.cfg bearbeiten . (mit Editor öffnen) (open with editor)
   
• im Abschnitt General

 

• [General]
      # Enable 3D representation of the piece (requires PyQt5 and OpenGL)
      mode3d =True

 

• den Wert auf False setzen und speichern. set the value to False and save.
  

ich hoffe, dass dies auch bei Euch hilft.   I hope this will help you, too.

  Gruss   salute