Automatic cutter compensation WITHOUT gui OR Inner / Outer cut through the LayerControl

[Ok Thierry]

Hi, 

Would there be a way to define cutter compensation via LayerControl? 

We're developing a D2G in the cloud. It generates Gcode from DXF without any GUI. We have one last bug to fix and it is the cutter compensation. Any help is much welcome. 

Have a look at the demo DXF 

https://drive.google.com/file/d/1a9z7vFQCbWlJz10couIqVeJnjMqqyMXc/view?usp=sharing

and the Gcode
https://drive.google.com/file/d/1IKdp6QmxtBvRRD9bNpCqTsZ9utVm94Zz/view?usp=sharing

We tried the Automatic tool compensation and we keep having errors with the start radius (Error "cutter comp entry move equal or smaller than tool radius" ) 

What have we done wrong? 
 

As a way to bypass thins, and also because we deactivate Automatic Tool Comp. for pocketing, we're therefore looking at a way to define inner cut tool compensation and outer cut via the layerControl. 

Anyone could indicate a starting point on how to approach this issue? 

Cheers,
Thierry