Groups

dxf2gcode-users

1–30 of 325

==>WE MOVED to:
https://www.ltspiceusers.ch/#dxf2gcode.68
Please use Forum to post new Topics.

0 selected

Andy M, Christian Kohlöffel10

12/17/21

Missing lines in output for Laser engraver

Christian, It is now working for me. The solution (for me) is to use the most recent version of

unread,

Missing lines in output for Laser engraver

Christian, It is now working for me. The solution (for me) is to use the most recent version of

12/17/21

Jack Kennedy, Christian Kohlöffel9

12/12/21

dxf2gcode 'hangs' when I try to load in a dxf file

Thanks Jack, for letting us know. Good to hear you were able to solve it. Von: dxf2gcode-users@

unread,

dxf2gcode 'hangs' when I try to load in a dxf file

Thanks Jack, for letting us know. Good to hear you were able to solve it. Von: dxf2gcode-users@

12/12/21

Piergiorgio Panzone, Christian Kohlöffel2

11/25/21

Problem with G2 G3

You need to change in the following area, refer to WIKI: dxf2gcode / Wiki / Postprocessor

unread,

Problem with G2 G3

You need to change in the following area, refer to WIKI: dxf2gcode / Wiki / Postprocessor

11/25/21

zhongri liu, … Christian Kohlöffel3

11/16/21

worked once but close the app when open the same file later on

You can also enable the logging to file in order to see the debug messages. Just do this in the

unread,

worked once but close the app when open the same file later on

You can also enable the logging to file in order to see the debug messages. Just do this in the

11/16/21

10/28/21

Automatic cutter compensation WITHOUT gui OR Inner / Outer cut through the LayerControl

Hi, Would there be a way to define cutter compensation via LayerControl? We're developing a D2G

unread,

Automatic cutter compensation WITHOUT gui OR Inner / Outer cut through the LayerControl

Hi, Would there be a way to define cutter compensation via LayerControl? We're developing a D2G

10/28/21

mi...@sulley.info, Christian Kohlöffel3

10/12/21

Hi Christian, Got it! Thank you. Mick On 09/10/2021 18:13, 'Christian Kohlöffel' via

unread,

Hi Christian, Got it! Thank you. Mick On 09/10/2021 18:13, 'Christian Kohlöffel' via

10/12/21

Senior Elf, Christian Kohlöffel2

8/12/21

Change Gcode save as extension to .NC

You just need to edit the postprocessor configuration. Check the Wiki at: https://sourceforge.net/p/

unread,

Change Gcode save as extension to .NC

You just need to edit the postprocessor configuration. Check the Wiki at: https://sourceforge.net/p/

8/12/21

Алексей Борисов, Christian Kohlöffel2

8/8/21

Мануал на русском....

воспользуйтесь переводчиком гугл. Это очень хорошо работает. Я также перевел это с его помощью Google

unread,

Мануал на русском....

воспользуйтесь переводчиком гугл. Это очень хорошо работает. Я также перевел это с его помощью Google

8/8/21

Celine Koh, jan iemhoff2

7/4/21

Use older dxf-format output Gesendet mit der Telekom Mail App --- Original-Nachricht --- Von: Celine

unread,

Use older dxf-format output Gesendet mit der Telekom Mail App --- Original-Nachricht --- Von: Celine

7/4/21

John Smith, Christian Kohlöffel2

6/3/21

Filling entities

HI, did you try the development Version, which noch includes this Kind of algorithm. Regards

unread,

Filling entities

HI, did you try the development Version, which noch includes this Kind of algorithm. Regards

6/3/21

Slavko Kocjancic, … Bernd Meyer5

6/1/21

Incorect dxf import

I try again to attach the DXF File. Sometimes Yahoo has an own life here ... Best regards from

unread,

Incorect dxf import

I try again to attach the DXF File. Sometimes Yahoo has an own life here ... Best regards from

6/1/21

Bernd Meyer, jan iemhoff9

6/1/21

dxf2gcode starts only one time

Gute Morgen Werde dein Stoff erstmal verdauen aber so schnell wie möglich darauf zurück. M ail: jan

unread,

dxf2gcode starts only one time

Gute Morgen Werde dein Stoff erstmal verdauen aber so schnell wie möglich darauf zurück. M ail: jan

6/1/21

James Walker, … Christian Kohlöffel4

5/14/21

Lead-In with cutter compensation in CAM (dxf2gcode) not in Machine

Auto recongnising of inside and autside is already there. Check the configuration page pls. If you

unread,

Lead-In with cutter compensation in CAM (dxf2gcode) not in Machine

Auto recongnising of inside and autside is already there. Check the configuration page pls. If you

5/14/21

4/30/21

DXF to CNC suitable for B&R Mapp

Hello, We need a CNC file that is suitable for a B&R CNC controller. The generated file from

unread,

DXF to CNC suitable for B&R Mapp

Hello, We need a CNC file that is suitable for a B&R CNC controller. The generated file from

4/30/21

Wagnerlip, Christian Kohlöffel10

4/11/21

DXF2GCODE TSP (path optimization question)

Von: dxf2gco...@googlegroups.com [mailto:dxf2gco...@googlegroups.com] Im Auftrag von Lip

unread,

DXF2GCODE TSP (path optimization question)

Von: dxf2gco...@googlegroups.com [mailto:dxf2gco...@googlegroups.com] Im Auftrag von Lip

4/11/21

4/9/21

Lathe and milling post processor Siemens inside :)

My firiend, thanks a lot to Admins / programer for study. I prepare post file and check on the

unread,

Lathe and milling post processor Siemens inside :)

My firiend, thanks a lot to Admins / programer for study. I prepare post file and check on the

4/9/21

mi...@sulley.info, Christian Kohlöffel7

4/6/21

Crash on Opening File

I tested it with 3.9 already and it should work. Strange thing … Von: dxf2gcode-users@googlegroups.

unread,

Crash on Opening File

I tested it with 3.9 already and it should work. Strange thing … Von: dxf2gcode-users@googlegroups.

4/6/21

Howard Weymouth, … Adam Geary6

3/30/21

Tool path fails on radius corners

Certainly, but I don't seem to have permission to post attachments or to reply to you directly,

unread,

Tool path fails on radius corners

Certainly, but I don't seem to have permission to post attachments or to reply to you directly,

3/30/21

Zachary Gudz, Christian Kohlöffel3

3/30/21

Loaded 86 entity geometries; reduced to 19 contours

Ok, thanks Chistian. For anyone pulling dxfs out of artios CAD, you may need to change the "

unread,

Loaded 86 entity geometries; reduced to 19 contours

Ok, thanks Chistian. For anyone pulling dxfs out of artios CAD, you may need to change the "

3/30/21

DartnDav, Christian Kohlöffel2

3/29/21

You can have several files as postporcessor. Did you choose the correct one during export. This is

unread,

You can have several files as postporcessor. Did you choose the correct one during export. This is

3/29/21

3/23/21

Change direction ignored for milling?

I've been generating gcode for a few years for milling metal and plastic - no problems. I'm

unread,

Change direction ignored for milling?

I've been generating gcode for a few years for milling metal and plastic - no problems. I'm

3/23/21

Christian Kohlöffel, … Daniel Luginbühl12

3/5/21

Re: [dxf2gcode-users] Sudden strange dxf2gcode behavior

Done. Thx Daniel Am 05.03.21 um 08:20 schrieb 'Christian Kohlöffel' via dxf2gcode-users:

unread,

Re: [dxf2gcode-users] Sudden strange dxf2gcode behavior

Done. Thx Daniel Am 05.03.21 um 08:20 schrieb 'Christian Kohlöffel' via dxf2gcode-users:

3/5/21

Anton Starc, Christian Kohlöffel5

3/5/21

Change G0 for drilling

If you want to support in adding this function, can you use the ticket which is already created for

unread,

Change G0 for drilling

If you want to support in adding this function, can you use the ticket which is already created for

3/5/21

Abd nanaa, Christian Kohlöffel4

2/26/21

knife direction

Here find the link to the function which is doing the G-Code for Drag Knife. Top Level here with

unread,

knife direction

Here find the link to the function which is doing the G-Code for Drag Knife. Top Level here with

2/26/21

Volodymyr B, Christian Kohlöffel2

2/15/21

How do I disable contour stroke and do centre only?

This is not part of dxf2gcode. The contour stroke is done by your dxf drawing tool and not dxf2gcode.

unread,

How do I disable contour stroke and do centre only?

This is not part of dxf2gcode. The contour stroke is done by your dxf drawing tool and not dxf2gcode.

2/15/21

Howard Weymouth, Christian Kohlöffel2

2/4/21

Missing pocket option?

There is a beta version to cut pockets, but not in the stable versions. Please check the last

unread,

Missing pocket option?

There is a beta version to cut pockets, but not in the stable versions. Please check the last

2/4/21

vignesh velmurugan, jan iemhoff3

2/2/21

Can't Export the DXF

Export to DXF or Export to CNCcode? Gesendet mit der Telekom Mail App --- Original-Nachricht --- Von:

unread,

Can't Export the DXF

Export to DXF or Export to CNCcode? Gesendet mit der Telekom Mail App --- Original-Nachricht --- Von:

2/2/21

breaku...@gmail.com2

1/24/21

Why does dxf2gcode ignore layers that are line hatched surfaces ?

Please cancel this question. The reason for whoever has the same problem is that CAd programs create

unread,

Why does dxf2gcode ignore layers that are line hatched surfaces ?

Please cancel this question. The reason for whoever has the same problem is that CAd programs create

1/24/21

Uli Schrey, Christian Kohlöffel4

1/19/21

dxf2gcode crashes at startup: ModuleNotFoundError: No module named 'validate'

Also in the README: Note: Please do not install python3 version 3.7.x as at the time of writing there

unread,

dxf2gcode crashes at startup: ModuleNotFoundError: No module named 'validate'

Also in the README: Note: Please do not install python3 version 3.7.x as at the time of writing there

1/19/21

Hans Rudolf Studer, Christian Kohlöffel7

1/19/21

language german?

Hallo Hans, ich bin mir nicht 100% sicher, doch dachte ich dass man das irgendwie einstellen kann,

unread,

language german?

Hallo Hans, ich bin mir nicht 100% sicher, doch dachte ich dass man das irgendwie einstellen kann,

1/19/21

Search

Clear search

Close search

Google apps

Main menu