dxf2gcode-dev

Hi Thierry, 1.) this seems to be a known topic while handling dxf files which are not drawn exact or

Hi all, It is not related to the Pocketing but kind of a continuity of this discussion. Since the

Hi, linuxcnc by default is in radius mode. G7 ... Lathe Diameter Mode G8 ... Lathe Radius Mode

Here one example from a ticket: dxf2gcode / Tickets / #126 Why "left compensation" works

Hi James, i thought the offset algorithm would require joined collinear lines, at least for lines

Hi. Interested in the usage pattern for Lasers. I am doing work on the code base at the moment that

Hello, We need a CNC file that is suitable for a B&R CNC controller. The generated file from

I cant export the DXF to .nc or .ngc. in windows build When I hit the export button and choose export

Hi everyone, I have been playing with DXF2GCODE for a little while, and I like its simplicity. I'

Hi Christian! Thanks for your valuable answer. Yes I still use dxf2gcode, but I tend to not update

Hi San, gratulations to your success, I hope you did find a good job to start your career .... i did

Hi Anthony, yes I am interested in foam cutting and the possibility of finding a software to handle

This can be done with the postprocessor. Check the Wiki for Details issy varsano <issyvarsano@

Of course, I've seen the feature/PocketMill branch and was going to look at it when I will

I tried pyment and it seems to work fine with the current @param etc, converting them to reST.

Thanks. Please let me know if it is an issue for you also. I will be happy to open a new thread if

Fixed DXF units detection, and added a menu option to switch between mm and inch if autodetection got

Hi Damian, for me the file: make_tr.py is not working. I am getting the following failure messag/

I have some git branches that fix some bugs and make it build on mac. I decided not to use dxf2gcode,

Hi Xavier, or anyone firm with Treeselection in pyQT5 i am not sure what i did here, can you check

I pushed Sebastian Reichel's PolyLine fix (but not the LWPolyLine fix, since an equivalent fix is

On 03/27/2018 01:04 PM, 'Christian Kohlöffel' via dxf2gcode-dev wrote: > this was an

On 03/17/2018 11:22 AM, 'Christian Kohlöffel' via dxf2gcode-dev wrote: > i just checked it

Hi there, anyone has some experience / knowledge how to integrate cython to improve speed. I am

On 03/16/2018 01:27 PM, 'Christian Kohlöffel' via dxf2gcode-dev wrote: > Hi Sebastian,

On 02/01/2018 01:01 PM, Sebastian Kuzminsky wrote: > Hello dxf2gcode devs, I have two patches that

On 01/24/2018 03:30 PM, 'Christian Kohlöffel' via dxf2gcode-dev wrote: > thank you for you

Hi there again, i did a bit of research. Following pages have been found to be related/interesting.

HI Richard, i will implement the Patches into the source Code repository and i am sure that every

Hi. I'm running dxf2gcode under Linux, often processing files from windows computers. These files