HACK Cakewalk Boost 11 Vst Plug In
Fanny Strebeck
How to Hack Cakewalk Boost 11 Vst Plug In for Better Midi Vocals
Cakewalk Boost 11 is a limiter plug in that can help you fine-tune your mixes and achieve a louder and clearer sound. But did you know that you can also use it to boost your midi vocals and make them sound more realistic and expressive?
In this article, we will show you how to hack Cakewalk Boost 11 Vst plug in for better midi vocals using some simple tricks and tips. You will need Cakewalk SONAR or any other DAW that supports VST plugins, and of course, Cakewalk Boost 11 Vst plug in.
Step 1: Load Cakewalk Boost 11 Vst Plug In on Your Midi Vocal Track
The first step is to load Cakewalk Boost 11 Vst plug in on your midi vocal track. You can do this by inserting it as an effect on the track or as a send effect on a bus. Either way, make sure that the output of the plug in is routed to your master output or another bus.
Step 2: Adjust the Threshold and Ceiling Parameters
The next step is to adjust the threshold and ceiling parameters of Cakewalk Boost 11 Vst plug in. The threshold determines how much of the signal will be affected by the limiter, while the ceiling determines how loud the output will be. You can use the input and output meters to monitor the levels.
For midi vocals, you want to set the threshold low enough to catch the peaks of the vocal notes, but not too low to squash the dynamics. A good starting point is around -12 dB. You can then adjust it by ear until you find a balance between loudness and clarity.
The ceiling parameter should be set to match the level of your other tracks or slightly lower. This will prevent clipping and distortion. A good starting point is around -0.3 dB. You can then adjust it by ear until you find a balance between loudness and headroom.
Step 3: Enable the Soft Clip Option
The final step is to enable the soft clip option of Cakewalk Boost 11 Vst plug in. This will add some subtle saturation and warmth to your midi vocals, making them sound more natural and less robotic. You can enable it by clicking on the SC button on the plug in interface.
You can also adjust the soft clip amount by dragging the knob next to the SC button. The higher the amount, the more saturation and distortion will be applied. A good starting point is around 50%. You can then adjust it by ear until you find a balance between warmth and clarity.
Conclusion
By following these steps, you can hack Cakewalk Boost 11 Vst plug in for better midi vocals. You can use this technique to enhance any midi vocal track, whether it's a solo voice, a choir, or a vocal synth. You can also experiment with different settings and combinations to achieve different results.
Cakewalk Boost 11 Vst plug in is a versatile and powerful tool that can help you improve your mixes and productions. If you want to learn more about it, you can check out its official website[^1^] or download it for free if you have SONAR[^2^]. Happy hacking!