Rocker Support

[Milton Beaty]

Please note, we do HIGHLY recommend adding center section uni-frame stiffeners or at least a plate on the uni-frame where these legs will tie in so that you have the extra support and don't crush your uni-frame upon a sudden impact.

Made from Billet Aluminum, This beefed up support will eliminate flexing when using high lift cams & stiff valve springs. Many times stronger then the factory die-cast part.

Twin Cam engines have clearance between the rocker arm shaft and the bolt used to hold down the support.
The factory setup only stops the shaft from falling out. It does not prevent the shaft twisting and contacting the bolt, causing a top end noise/ticking.
We have redesigned our rocker arm supports with a simple mechanical lock to hold the shafts in place with ZERO movement that only takes a minute to install.

Fix two problems at once- upgrade your supports with fresh rocker shafts and reduce top end noise.

Cycle Solutions Inc uses these rocker stands in our high horsepower motor builds because they are heavy duty and there are no clearance issues when using the S&S Roller Rocker Arms 900-4065A and S&S Rocker Arm Shafts. All the parts go together perfectly with no clearance issues.

15870 Pine Ridge Rd, Ste 4
Fort Myers, Florida 33908ABOUT CYCLE SOLUTIONS INC.Cycle Solutions Inc., one of the top Harley Davidson dyno tuners in the nation, travels to 20 major motorcycle rallies across the USA selling and installing performance parts on Harley Davidson motorcycles along with Dynojet dyno tuning. Through our constant effort to increase performance in V-Twin motorcycles, we learn and discover the best parts combinations which you can purchase here on our website or at a rally near you.

When you have a bike that is perfectly comfortable outside, and then leads to problems when ridden inside, I feel it is important to look at what is different. When you do, there are two key differences.

A bike mounted into a typical trainer ends up being very fixed and rigid in position. This can lead to excessive loading on the sit bones on the saddle because there is no shift in the demand on the muscles and tissue around them.

The fact that a RP allows that subtle shift from side to side, it replicates what we experience on the road. It changes the loading on the sit bones and related tissue with every bit of motion. I find it removes that tendency to grind those parts with no change in loading.

Overall, saddle comfort is the driving reason people build a rocker plate. Most of the people I have seen add one, say that the RP has noticeably increase the seated comfort on the bike, especially when seated. Very few say there is no difference.

That and the desire to use the trainer I already had at the time (Kinetic Road Machine) is one of the reasons I may my first rocker. There is no need for the width they made, IMHO. Maybe it is there to prevent those larger riders and/or those with questionable balance, but I have not had issues with my 32" wide footprint.

An interesting synopsis on rocker plates by @GPLama and how they differ from riding outside with a couple of recommendations. Indoor Cycling Trainer Rocker Plates - Round 2 // Rockit Launcher - YouTube

The Sleepytroll baby rocker attaches to your stroller, providing a gentle rocking motion that helps soothe babies and extend those daytime naps. It is portable and lightweight, making it convenient to use while out and about.

By using extra adaptors, the Sleepytroll Baby Rocker easily attaches to the crib, providing a gentle rocking motion to help soothe and calm your baby to sleep. With the help of Sensor mode Sleepytroll can bridge those sleep cycles at night.

I have ordered a number of things off social media advertising and I can freely say that the value and quality of some of the items has been very disappointing. There was two great things about my order for the Ready Rocky; fast delivery and most of all the advertising was true to its statement! I purchased two of them, one for me and one for my mom, so glad I did!

I'm not one to write reviews, but I could rave about this product for days. We initially purchased this for my husbands grandmother, who had been living with us temporarily. We own one of those deep couches, which was really uncomfortable for her to sit on. The rocker gave her extra support so her feet could sit properly on the ground, and also allowed her to rock herself while sitting. It also provided her with momentum so we could easily lift her up. We would move it around with her everywhere she went (dinner table, on the couch, at doctor appointments, visiting family). We ended up buying a 2nd one, which now gets used all around the house. I use it in bed at night for reading, my husband uses it to watch tv and my kids will try to steal it any chance they get. The adjustable dial in the back is pretty awesome, so you're not married to 1 specific rocking style. Overall this is just a really great concept that basically anyone can use.

The ready rocker has been great for working from home! My job calls for sitting for long periods of time- this product helps alleviate my back pain and fixes my posture. The adjustable feature has been convenient when switching chairs/rooms. I would highly recommend this product if you need additional back support

Disclaimer:The information contained on this site is provided as a public service. It is posted for informational and educational purposes only. This information should not be construed as personal medical advice. Because each person's health needs are different, a health care professional should be consulted before acting on any information provided in these materials. Although every effort is made to ensure that this material is accurate and up-to-date, it is provided for the convenience of the user and should not be considered definitive. The Ready Rocker is not a medical device. Individual experiences and results will vary. Rock on.

So I m trying to optimize a rocker bogie suspension system but I am running into a few problems using the parameters. I am having problems with my parameter "L4" it should be a Patagonian equation for a triangle length: (S1^2+(2R))^(-1) but when I try it on my calculator I get different values then the nominal. I also get the text in red. I hope this is the cause for it not being able to finish the constraints since i am fairly certain my parameters I derived are correct. I attached images of what I am trying to do and what the inventor software is showing

whoops i meant to have it to the power of 1/2 lol but yes i have tried putting the powers in () but thanks for the sqrt function i didnt know it was used here since i didn't see it on the list of commands i could use. but thanks i will give it a go

Supports connect the member to the ground or to some other parts of the structure. Structures need to be supported, so that, they can remain in equilibrium under any system of forces likely to act on them. These supports develop the force as a Support Reaction.

A simple support reaction is just supported on which structural member rests. They cannot resists lateral movement and moment like roller supports. They only resist vertical movement of support with the help of gravity.

Fixed Support reactions are rigid supports. fixed support reactions are restrained against both rotation and translation so they can resist any type of force or moment. to provide good stability to the structure, at least one rigid support should be provided. Beam fixed in the wall is a good example of fixed support.

Roller support and reactions resist perpendicular forces and they cannot resist parallel or horizontal forces and moments. It means the roller support will move freely along the surface without resisting horizontal force.

Pinned Support or Hing support reactions resist both vertical and horizontal forces but they cannot resist a moment. The best example of hinged support is the door leaf which only rotates about its vertical axis without any horizontal or vertical movement. the rotation of pinned support or hinged support is allowed in only one direction and is resisted in other directions.

The internal hinge also resists translation in both directions and allows only rotation. In structures, for axial members, internal hinges are provided and for beam members, middle hinges are provided.
These can be widely seen in arch-type bridges at the center of the arch.

Structural engineering and analysis are the most important sub-branch of civil engineering that is responsible for the whole infrastructure developed around us globally from buildings, bridges, highways, ports, and many others. With this article, you can learn the types of support that how its important for any structure.

\r\n\t This comfortable sandal features the signature removable and replaceable footbed, constructed of multiple layers of cork, polyurethane and memory foam to keep you going all day and all night. The classic rocker outsole lets your foot glide in a natural motion to help support proper foot alignment and arch support.\r\n

In daily life the average person interacts with numerous machines including cars, phones, computers, drink dispensers, gaming controllers, and many that are specific to their job. Regardless of individual complexity, all of these machines have at least one tactile switch with moving parts that helps the user achieve some desired action. The movement aspect of the switch provides instant kinesthetic feedback complimenting the visual feedback of the desired action being executed. Metal contact switches have served as the method for transducing the switch movement into machine action. While metal-contact switches are ubiquitous in use, they do have some challenges with stiction, corrosion, and contamination, which ultimately affect ease of manufacturing, reliability, and user experience.

c80f0f1006