Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

(ASCEND) setting the RADIUS accounting server via SNMP

1 view
Skip to first unread message

owner-asc...@max.bungi.com

unread,
Jul 7, 1998, 3:00:00 AM7/7/98
to Ascend Mailing List

John Coy wrote:
]
]Is there a way to set the value of the RADIUS auth server via
]SNMP? If so, what is the OID for that value? Thanks in advance.

% snmpwalk -v 1 128.205.200.74 netop .1.3.6.1.4.1.529.13.3.1.11
enterprises.529.13.3.1.11.1 = IpAddress: 128.205.200.3
enterprises.529.13.3.1.11.2 = IpAddress: 128.205.1.16
enterprises.529.13.3.1.11.3 = IpAddress: 0.0.0.0

Shows the radius servers

==========================================

% snmpwalk -v 1 128.205.200.74 netop .1.3.6.1.4.1.529.13.3.1.12
enterprises.529.13.3.1.12.1 = 2
enterprises.529.13.3.1.12.2 = 1
enterprises.529.13.3.1.12.3 = 1

2 = current primary server 1 = standby server

___________________________________________________________________________
Joe Pautler, E.I.T. University at Buffalo
CIT/OSS Network Engineering 224 Computing Center
http://www.oss.buffalo.edu/~pautler (716) 645-3536

++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-use...@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>

owner-asc...@max.bungi.com

unread,
Jul 10, 1998, 3:00:00 AM7/10/98
to Joe Pautler, Ascend Mailing List
At 09:33 PM 7/6/98 -0400, Joe Pautler wrote:
>John Coy wrote:
>]
>]Is there a way to set the value of the RADIUS auth server via
>]SNMP? If so, what is the OID for that value? Thanks in advance.

These are read-only fields.

>% snmpwalk -v 1 128.205.200.74 netop .1.3.6.1.4.1.529.13.3.1.11
>enterprises.529.13.3.1.11.1 = IpAddress: 128.205.200.3
>enterprises.529.13.3.1.11.2 = IpAddress: 128.205.1.16
>enterprises.529.13.3.1.11.3 = IpAddress: 0.0.0.0
>
>Shows the radius servers
>
>==========================================
>
>% snmpwalk -v 1 128.205.200.74 netop .1.3.6.1.4.1.529.13.3.1.12
>enterprises.529.13.3.1.12.1 = 2
>enterprises.529.13.3.1.12.2 = 1
>enterprises.529.13.3.1.12.3 = 1
>
>2 = current primary server 1 = standby server

You can set these, to change which server is active/standby.


Kevin Smith Ascend Communications...
Customer Satisfaction ...where Network Solutions never end.

owner-asc...@max.bungi.com

unread,
Jul 10, 1998, 3:00:00 AM7/10/98
to John Coy (anc.net), ascend...@bungi.com
At 01:52 PM 7/4/98 -0500, John Coy (anc.net) wrote:
>Is there a way to set the value of the RADIUS auth server via
>SNMP? If so, what is the OID for that value? Thanks in advance.

Most of the RADIUS OIDs are read-only, as mentioned elsewhere. The
only settable values are the radAuthCurrentServerFlag and the
radAcctCurrentServerFlag which allows you to switch between
the currently configured servers.

(radius.mib).

0 new messages