Put the socket in the vice and use a punch and hammer. You want to get the punch off to one side not in the center, work it around to opposite sides. Good luck. Also if you need another socket there should be a black 3/4" which is nearly the same as 19mm.
-dc
Last night, working on my car, the 19mm deepwell socket got a lug stuck in it. Tried using a punch and the punch went into the lug without dislodging it and I barely got the punch out. Looking for recommendations on how to get the nut out.
--
You received this message because you are subscribed to the Google Groups "Area515 - Des Moines Maker Space" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dsmhackerspac...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dsmhackerspace/2ee86409-bb7c-4c05-8e81-d3be586eba39n%40googlegroups.com.
I'll give it another go tonight. Thanks!
You received this message because you are subscribed to a topic in the Google Groups "Area515 - Des Moines Maker Space" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/dsmhackerspace/tBkYv4sqUM0/unsubscribe.
To unsubscribe from this group and all its topics, send an email to dsmhackerspac...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dsmhackerspace/CAJ7QWVPccOHhJz79wOCupMC%3DTx_YFQgbMKGj-zJNNUT-jop5Dw%40mail.gmail.com.
Hey Steve, in the past I have threaded it part way back on then either tapped on it, and couple of times used a prybar between the hub and socket.
Last night, working on my car, the 19mm deepwell socket got a lug stuck in it. Tried using a punch and the punch went into the lug without dislodging it and I barely got the punch out. Looking for recommendations on how to get the nut out.
--
Kai e'Kael
To view this discussion on the web visit https://groups.google.com/d/msgid/dsmhackerspace/CADptQYaTCLP%3DKMaWh5wfGU5PtJmhzF72v4Nu%3DXpBDXmCihP79g%40mail.gmail.com.
Got it freed with a punch. Thanks all!
You received this message because you are subscribed to a topic in the Google Groups "Area515 - Des Moines Maker Space" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/dsmhackerspace/tBkYv4sqUM0/unsubscribe.
To unsubscribe from this group and all its topics, send an email to dsmhackerspac...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dsmhackerspace/2a5d947b-11bc-4360-878a-a0a773ed645d%40gmail.com.