Multiple drobos - how to address a particular device?

[robj]

Hi,

I have re-arranged my server setup so I now have both Drobopros attached via iscsi to the same Centos-based machine (each on it's own port on an Intel quad port ethernet card).

Everything is working fine, but I cannot figure out how to direct configuration commands to a specific Drobo.

The only thing I came up with was shut everything down, disconnect one then restart - that way I knew which one I was working with.

Hopefully it's not something I have to do again for a long time, but I'm curious if it's possible to address each unit separately via Drobo utils?

Rob.

[Peter Silva]

you need to know which /dev/sd each unit is associated with... Once you do:

drobom -d /dev/sdx ...

drobom -d /dev/sdy ...

should work... It has been a long time... 

--
You received this message because you are subscribed to the Google Groups "drobo-talk" group.
To unsubscribe from this group and stop receiving emails from it, send an email to drobo-talk+...@googlegroups.com.
To post to this group, send email to drobo...@googlegroups.com.
Visit this group at http://groups.google.com/group/drobo-talk.
For more options, visit https://groups.google.com/d/optout.

[robj]

Hi Peter,

sorry for the delay replying, only just had chance to try it..

 

drobom -d /dev/sdx ...

drobom -d /dev/sdy ...

This works perfectly, many thanks.

Robrt.