Hipath 3550

0 views

Skip to first unread message

Rolan Sacco

unread,

Aug 3, 2024, 4:45:48 PM8/3/24

to dresesbuweb

I want to port the entire block of DDIs to a VoIP provider. In the future, I would like to be able to add purely IP phones to the phone network and have them function seamlessly with the legacy PBX. For example, if we acquire office space in a different building.

The HiPath 3550 can take expansion card HXGS3 (apparently also known as HG 1500). This expansion card is a VoIP gateway board, and would allegedly receive calls via SIP trunks with a VoIP provider. Hopefully it could be configured to ring the correct extensions.

Alternatively, we might buy a nice Asterisk appliance from Digium or similar. This box would receive incoming VoIP calls and hand them over to the HiPath PBX, and likewise for outgoing calls from the PBX.

So for Ireland we have ISDN in to box using G703 connections (look like BNC) that box spits out a CAT 5 cable into the PBX. (Now Im from the UK and its almost always the same) All this kit belongs to the telco.

So all you do is slip the gateway between this interface and the PBX. Tell the gateway what numbers to transparently pass to the PBX and what numbers to pass to the VOIP system. All you will need is special CAT 5 cable that wired a bit differently to ethernet, cant remember how but any phone engineer will know.

The other way (2nd choice) you can do this is by creating a PRI relay or PRI wedge install with Asterisk. In this case the asterisk box will sit between the Co and the HiPath. You will do this by using a dual port PRI card in the asterisk box. To the Co (telco) asterisk will be a PBX and to the HiPath asterisk will act like the Co (telco). In this configuration the asterisk box will be in pass through mode just relaying calls between the PRI ports. But it will also be able to intercept and redirect calls from VoIP or the PRI side.

The last way I can think of to do this is with an asterisk box and a FXO gateway. The fxo gateway will act as a telephone handset to the HiPath. Calls coming into the asterisk PBX will be directed to the FXO gateway that will basically pick up the hand set on the HiPath and dial the destination number. This setup is tricky and some times problematic but it will work if setup carefully.

Here I have a Siemens HiPath 3550 and 3 OpenStage 15T phones. Are 2 more phone in boxes. I tried this new terminals in the same positions where actually are working the others but the device just make a red blink in the keyboard and nothing more. I can change the using devices between them and are working, but those 2 new terminals are not working in position.

The Siemens HiPath 3550 is a wall mountable phone system for up to 44 users. A flexible wall mounted system offering solutions to suit many different applications from basic systems to advance and complex solutions, and is ideal for up to 12 to 116 users. Real Time IP system that also supports digital and analogue phones and also supports all necessary digital and analogue interfaces. Interactive user prompting via display and dialogue keys on optiPoint handsets provides for quick and easy activation of features.

Free Next Day Delivery for all UK Mainland orders. Order cut-off time is 3PM. We aim to dispatch your goods on the same day we receive payment. In some cases it may take up to 1 working day for us to dispatch your purchase. In case of urgency please contact us. We offer worldwide shipping. If you do not see the shipping information for a particular country then please contact us to request a shipping quote. DPD, Interlink and UPS deliveries MUST be signed for. Our contact telephone number: +44 (0) 333 222 6636

DPD / Interlink tracked and signed. Next working day delivery Royal mail 24h Tracked. Next working day delivery Royal mail 48h Tracked. Two working day delivery Royal mail economy delivery. Please note this delivery is not tracked. Delivered in 3 to 5 working Days.

The Siemens S30810-Q2957-X SLAD16 module board has 16 analogue interfaces with CLIP function to allow connection of neural terminals to the system. It is compatible with the Siemens Hipath 3350 and 3550 systems.

MF Communications stock a wide range of new, remanufactured and refurbished business telephone system spares and parts, and deliver them worldwide. All Siemens PBX system parts come fully tested and with a full one year warranty.

We offer after sales support** and advice from answering simple user questions to full system programming services. These services are maintained through a combination of online support documents and a full range of business telecoms services, including our maintenance and support services.

We ship worldwide from our UK warehouse. All international shipment charges are quoted per parcel. If your order exceeds the standard parcel size further shipment charges will be due before the order can be shipped. We will contact you directly with any additional shipment charges are due.

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Your telephone system (or PBX, PABX) produces a packet of data (a call record) after every phone call your company or office makes through it. These call records contain important information about each call, including whether it was an incoming call, and outgoing call, or another type, such as an internal (extension to extension) call.

Call log records from Siemens Hipath-3550 contain information about the caller phone and the dealed phone, as well as extra information such as the call duration, the time of the call, and other information, such as which telephone line (trunk) was used to carry the call.

The usual practice of Siemens Hipath-3550 call logging involves capturing these call records, parsing it, and storing them in a database, and their subsequent retrieval by way of a reporting interface.

Here at Datasharp Central, our experienced team can provide a complete range of telecommunication systems to suit your needs. Our telecommunications team can deliver and install Unify HiPath 3550 telephone systems for all kinds of SMEs. Unify, formerly known as Siemens, can provide a complete range of telecoms systems to suit your needs. These solutions are essential for small and medium enterprises.

Unify (formerly Siemens) telecommunications are designed to offer many years of reliable services to UK SMEs. The HiPath 3550 telephone systems we can provide are the perfect choice for all sizes of business. These solutions all rely on IP communication to deliver a reliable telephone system. The HiPath 3000 series is one of the most popular in the UK and offers a variety of features to any workplace.

Here at Datasharp Central, our experienced team can deliver a complete range of reliable telecommunication systems to suit your needs. Formerly known as Siemens, we are proud to offer industry-leading Unify communication solutions to SMEs of all kinds.

i have a little idea on this.
ok kindly fix the HG 1500 ip card,and upload its to the hipath 3500 using the software ,make sure its active,then configure an ip address to the hig card,a defult.ip so when ever u re login in to the system try and choose the hig ip

HiPath 3350 la centrale telefonica adatta alle piccole aziende, infatti supporta fino ad un massimo di 36 derivati analogici e 8 digitali oppure fino a 24 derivati digitali e 4 analogici. HiPath 3350 installabile a parete e offre tutte le funzioni della serie HiPath, come ad esempio la Voice Mail e il posto operatore automatico integrato.

HiPath 3550 offre a differenza del HiPath 3350 maggiori possibilit di espansione; infatti pu raggiungere fino a 96 utenti analogici e 72 utenti digitali oltre alla possibilit di gestire client IP fino ad un massimo di 192.