Fix Maker V3.2 Download
Taleen Sameh
My laser engraving started out with an Acro Laser using the Eleksmaker Mana SE V3.2 board and a 3.5W diode laser. I have since migrated to a CNC shield V3.0 to add a Z axis to the Acro but the original Eleksmaker Mana worked well.
Edit: I printed a calibration cube using the Ender 3 v2 profile suggested by @Slashee_the_Cow using the freebie filament supplied by Creality (rather than any of my nice stuff) and it came out pretty great, honestly! For any other early adopters of the Ender 3 V3 SE, you should be good to go with the same profile until an official profile is added
If you use the Ender 3 V2 profile with the V3, you should probably change (increase) the printing speed. I copied the speed settings from Creality Print profile for the V3 to the Cura profile (I kept 20mm/s for initial layer just to be safe, although 30mm/s worked most of the time).
The only difference in the printer settings is the size of the build area - the default Ender-3 / Ender-3 v2 profile in Cura has the size of the bed (which is bigger than the printable area and I've heard can be unlocked with custom firmware), but with the extra area marked off as an area the extruder can't go - which doesn't fully work, I've done corner to corner prints and they had move commands past 220mm, so in my custom profile for my Ender-3 v2 Neo I just changed the bed size to 220 x 220 (what is officially supported) - but you can change the bed size for a printer in Cura without having to edit the definition file, just do it the machine settings.
The g-code is exactly the same. What doesn't appear in profile for the Ender-3 / v2 is just the material feed rate and flow rate at the start and that gets added from the Creality base definition file. You can see it if you just open up a gcode file Cura has sliced from the stock E3/v2 profile in a text editor.
Edit: my mistake, the Creality Print profile for the v3 SE defines a much smaller machine head - Cura uses this if you have multiple models set up and set them to print one at a time to know how far apart objects have have to be, so that the nozzle or head doesn't bump into the ones you've already printed. Looking at the photos (since I don't have a v3 to measure, donations accepted), the v3's head is actually much bigger than the v1/v2's head, so Creality's setting in the profile there could cause problems.
Has anyone figured out how to use the exported printer profile from Creality Print 4.x and import into Cura 5.4? Or is there a format converter out there that can do it?
I'd also like to export the print profiles as well.
Despite my maintaining its unnecessarity, I did just have a look. Creality Print is definitely based on Cura, but I don't know if they forked Cura ages ago (I'm not really familiar with how Cura has changed over its entire version history) or if they made everything pretty different just for the fun of it. Either way, both the printer profiles and quality presets are in formats fairly and somewhat different respectively to how they are in Cura 5.4 (or even 4.13.1).
Could it be done? Probably, but I don't have the time personally. The profiles would be possible to do manually, so if you feel like doing a lot of typing in manually, the quality profiles are just text files. Open one up, you can just do it in Notepad (or your platform's equivalent). In Cura, switch to the high/low quality based on what you want to start with, then make the changes that are defined in the Creality Print base profile, then save it as a new profile (which will be based on the Cura default quality profile). Then using that profile to start, make the changes that in the Ender-3 v3 SE quality profile, and save that as a new profile (so it'll be based on the Creality Print base profile). Then if you want to make any new profiles of your own, base them on that Ender-3 v3 quality profile.
The machine definitions are stored in a format more different to Cura. They use the same field names (mostly) but the files are almost completely unformatted (Cura uses a strict subset of JSON) but since they don't contain proper parenting information would require a lot more hunting to find all the relevant settings (and then type them up in a new Cura definition file, and add the appropriate nozzles and extruder definitions in other files if necessary).
IMHO: I don't know why you'd want to, especially the quality presets. My tally for successful prints (not counting unsuccessful prints where I obviously made an error in the model or settings) are 1 out of 3 for Creality Print and about 85% for Cura. If you want to include my personal stuffups, the success rate is 1 out of 3 for Creaity Print (gives you some idea how quickly I got sick of it) and about 70% for Cura.
The 5.5 release of Cura may or may not include the definition. There is a pull request HERE to add the full definition. You might want to comment on it and perhaps it will get expedited and make it into the 5.5 release.
Run the auto levelling system from the printer's control panel (main screen, bottom right setting). That will automatically measure the heights of sections of the plate and set the correct Z offset for the printer. If it doesn't, you can adjust it manually, but I'd probably be more likely to reach out to Creality and ask "why is this thing not doing the thing it's supposed to automagically do?"
Absolute beginner here: I came across a reddit post saying that G28 will remove bed leveling data. Does this only apply to the leveling data from G29, or does it remove the data for the mesh set by the printer itself as well? Also, I looked at the gcode generated by Cura on the stock profile, and I don't see the M220 or M221 commands anywhere. Should I add those in?
G28 doesn't delete any bed levelling data. By default, it does turn bed levelling off, but there's a setting in the printer's firmware (the deep part of the firmware, not the settings you can access) that disables that behaviour.
The printer definitions come from members of the Cura "open source" community, or from the printer manufacturer. Ultimaker can't be expected to go out and buy one of every printer on the planet on the day they are announced and write definitions for other peoples hardware. They are in business to sell their own printers.
In two weeks or so when the stable 5.5 is released, or in 3 or 4 months when a new Cura is released maybe someone will have written and submitted all the definition files for that printer. Then again, maybe not.
If you're still worried about the size of the print head, it's in the definition file - feel free to change it if you're worried. I've been using a slightly modified version of the profile from the Github repo (mostly me changing the start/end g-code) for a couple of weeks now without issue.
Also: I'm pretty sure Creality isn't stupid enough to design a printer whose print head can crash into the printer. The bed is still 235 x 235 but there's physical stoppers on both the gantry and platform that prevent it from going past 220 x 220, unlike previous models.
Yes I pulled the from Creality Print already but they are single figures in Cura so don't correlate to transferring across directly. and they do design printers that the heads crash into the printer had it happen on my V2 with incorrect start gocde that's why there is print head sizes to input in the first place, but if you're saying there's physical stops I will just keep the presets for v2 settings & see how I go until they release the printer profile
Cura 5.6 stable is now out and includes the profile for the E3V3SE. If you've already added it to an older version, you should remove the printer in Cura, go to Help > Show Configuration Folder, close Cura, and remove the previously added files, which are:
UPDATE UPDATE: The profile is in the Cura 5.6.0 beta. If you're cool running a beta version (I don't think I've had a problem with any of them, but I'm just one person) you can get it here. If you're not cool running beta versions, my instructions below still work.
UPDATE: The profile is in the main code base for Cura, but did not make it into the release branch for 5.5. Hopefully this means it will appear in an update soon. My instructions below are still valid, but:
I've attached a zip file containing all the files in one so you don't have to download them manually. Just go into your Cura configuration folder and extract it, making sure that the folder structure is kept intact - which it should be by default in most systems, so that the files go into the existing folders. Just open the zip file, drag and drop the folders into your Cura configuration folder.
b1e95dc632