Crescent shaped grains in Dream3D

[G V Sai Harshit]

Hello everyone,

I have an EBSD scan of an as-printed IN625 specimen produced via LPBF. The scan reveals a significant number of grains exhibiting crescent-shaped or U-shaped morphologies. An example of the observed grain structures is shown below. I would like to know if it is possible to replicate such grain shapes in a generated microstructure based on the EBSD-derived grain statistics.

[Michael Jackson]

Hello,

    I do not believe that DREAM.3D version 6.5.171 would be able to reproduce this kind of grain structure. 

--
Mike Jackson                    mike.j...@bluequartz.net
BlueQuartz Software         www.bluequartz.net

President/Owner               Dayton, Ohio

Principal DREAM.3D Developer

On Aug 12, 2025 at 10:58:54, G V Sai Harshit <gvsh...@gmail.com> wrote:

Hello everyone,

I have an EBSD scan of an as-printed IN625 specimen produced via LPBF. The scan reveals a significant number of grains exhibiting crescent-shaped or U-shaped morphologies. An example of the observed grain structures is shown below. I would like to know if it is possible to replicate such grain shapes in a generated microstructure based on the EBSD-derived grain statistics.

--
You received this message because you are subscribed to the Google Groups "dream3d-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dream3d-user...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/dream3d-users/86546c28-1f18-4e00-851a-c7ce45c1adf4n%40googlegroups.com.