Hi Mike,
I can't seem to get a .ang file to load in Dream 3D. When I click "Set Reference Frame" in the "Import Orientation File(s) to H5EBSD" filter I get an error message of "There was an error reading the .ang file...The error code returned was -110"
The google group message won't let me upload the file (I get an unspecified error), but here is the header and first few lines:
# x-star 0.545067
# y-star 0.517291
# z-star 0.682900
# WorkingDistance 20.000000
#
# InterplanarTolerance 3.000000
# SEMVoltage 20.000000
# PhaseDiffFactor_Votes 1
# PhaseDiffFactor_Fit 1
# PhaseDiffFactor_CI 1
# PhaseDiffFactor_BandWidth 0
# CI_CalcMethod 0
# Use Band Widths 0
#
# MaterialName Zirconia
# Formula ZrO
# Info
# Symmetry 43
# LatticeConstants 4.620 4.620 4.620 90.000 90.000 90.000
# NumberFamilies 5
# hklFamilies 1 1 1 1 0.000000 1
# hklFamilies 2 0 0 1 0.000000 1
# hklFamilies 1 1 2 1 0.000000 1
# hklFamilies 2 2 0 1 0.000000 1
# hklFamilies 3 1 1 1 0.000000 1
# ElasticConstants -1.000000 -1.000000 -1.000000 -1.000000 -1.000000 -1.000000
# ElasticConstants -1.000000 -1.000000 -1.000000 -1.000000 -1.000000 -1.000000
# ElasticConstants -1.000000 -1.000000 -1.000000 -1.000000 -1.000000 -1.000000
# ElasticConstants -1.000000 -1.000000 -1.000000 -1.000000 -1.000000 -1.000000
# ElasticConstants -1.000000 -1.000000 -1.000000 -1.000000 -1.000000 -1.000000
# ElasticConstants -1.000000 -1.000000 -1.000000 -1.000000 -1.000000 -1.000000
#
# GRID: SqrGrid
#
# OPERATOR: hrsem
6.05835 0.90566 3.04559 0.00000 0.00000 56443.523 0.152 0 1 1.872
0.01902 2.71150 6.05818 1.20000 0.00000 50503.371 0.002 0 1 2.518
4.18162 2.53339 2.37336 2.40000 0.00000 40793.637 0.125 0 1 1.927
There are 1500*1501 = 2251500 points total. Not knowing what error -110 means, I tried manually adjusting the header to match the header of the example files in "...\SmallIN100\Slice-1.ang" and got the same error.
I'm wondering if the scan is just too large for Dream3D to handle?
Any thoughts?
Thank you!
Oliver