Groups keyboard shortcuts have been updated

Dismiss

See shortcuts

dream3d-users

1–30 of 1392

Welcome to the DREAM3D users mailing list. If you have questions about using the DREAM3D (http://dream3d.bluequartz.net) software this is the place to ask the community.

0 selected

Josh Stickel, Michael Jackson3

3:59 PM

Orientations from IPF map

Thanks for this, Mike! This kind of confirms my suspicions about how IPF works. I was able to clean

unread,

Orientations from IPF map

Thanks for this, Mike! This kind of confirms my suspicions about how IPF works. I was able to clean

3:59 PM

Charles Cao, Michael Jackson2

12:49 PM

How to avoid the precipitate touching in Dream 3D

Hello Zhenjie, I am not sure if there are any filters at this time within DREAM.3D Version 6.5.171

unread,

How to avoid the precipitate touching in Dream 3D

Hello Zhenjie, I am not sure if there are any filters at this time within DREAM.3D Version 6.5.171

12:49 PM

YX Z, Michael Jackson2

Jan 21

Why is the model I generated from the EBSD data 3D?

In DREAM.3D each volume element has 3 dimensions: X, Y and Z. Therefor even for a “2D” slice, the

unread,

Why is the model I generated from the EBSD data 3D?

In DREAM.3D each volume element has 3 dimensions: X, Y and Z. Therefor even for a “2D” slice, the

Jan 21

Saba Saba, Michael Jackson2

Jan 20

Using DREAM3D microstructure in DAMASK

Hello, I believe DAMASK might have the capability to directly use a .dream3d file? Also some

unread,

Using DREAM3D microstructure in DAMASK

Hello, I believe DAMASK might have the capability to directly use a .dream3d file? Also some

Jan 20

wang zh, Michael Jackson4

Jan 20

How to use Dream3D to generate a 1:1 real crystal plasticity model

In DREAM.3D version 6.5.171 there is a filter called “Change Resolution” that should allow you to

unread,

How to use Dream3D to generate a 1:1 real crystal plasticity model

In DREAM.3D version 6.5.171 there is a filter called “Change Resolution” that should allow you to

Jan 20

Michael Jackson

Jan 20

Re: How to regulate the size of model elements generated through EBSD files?

Hello, You could use the “Crop Geometry” filter to extract out a single slice of data from the model.

unread,

Re: How to regulate the size of model elements generated through EBSD files?

Hello, You could use the “Crop Geometry” filter to extract out a single slice of data from the model.

Jan 20

Jan 18

How to setup the Potts model

Hi, I have a pipeline with two microstructures stitched together using append Z slice. Looking at

unread,

How to setup the Potts model

Hi, I have a pipeline with two microstructures stitched together using append Z slice. Looking at

Jan 18

Dhaval Panwala, Michael Jackson2

Jan 17

to generate 3D microstructure form .csv file

Dear Dhaval Panwala, Taking a look at your grain structure, it does not look like a typical “rolled”

unread,

to generate 3D microstructure form .csv file

Dear Dhaval Panwala, Taking a look at your grain structure, it does not look like a typical “rolled”

Jan 17

Michael Jackson

Jan 16

DREAM3D-NX Version 7 YouTube Videos

To help encourage use of DREAM3D-NX we have posted a number of videos that try to cover the basics of

unread,

DREAM3D-NX Version 7 YouTube Videos

To help encourage use of DREAM3D-NX we have posted a number of videos that try to cover the basics of

Jan 16

IITian Solves, Michael Jackson2

Jan 13

Regarding using materials.config file for DAMASK

There is a filter called “Convert Orientation Representation” that can convert the Euler Angles to

unread,

Regarding using materials.config file for DAMASK

There is a filter called “Convert Orientation Representation” that can convert the Euler Angles to

Jan 13

Michael Jackson

Jan 9

Re: CCBuilder -> older versions of DREAM3D

Dear Philip, https://gitlab.com/materials-modeling/ccbuilder/-/issues/1 That merge request will fix

unread,

Re: CCBuilder -> older versions of DREAM3D

Dear Philip, https://gitlab.com/materials-modeling/ccbuilder/-/issues/1 That merge request will fix

Jan 9

Prerana C Inguva, Michael Jackson6

Jan 6

Query regarding open cell metal foams

Thank you very much for your reply Micheal! This gives a clarity to my situation. On Mon, Jan 6, 2025

unread,

Query regarding open cell metal foams

Thank you very much for your reply Micheal! This gives a clarity to my situation. On Mon, Jan 6, 2025

Jan 6

Jack, Michael Jackson3

Jan 6

Align Sections (Misorientation)

Thank you Michael Il lun 6 gen 2025, 15:46 Michael Jackson <mike.j...@bluequartz.net> ha

unread,

Align Sections (Misorientation)

Thank you Michael Il lun 6 gen 2025, 15:46 Michael Jackson <mike.j...@bluequartz.net> ha

Jan 6

Aarya Sathe, Michael Jackson4

Jan 5

Guidance Needed for Smoothing Stepped Grain Boundaries in DREAM3DNX Model

Dear Aarya, I took a look at your data slice by slice and I believe there to be some rotation of the

unread,

Guidance Needed for Smoothing Stepped Grain Boundaries in DREAM3DNX Model

Dear Aarya, I took a look at your data slice by slice and I believe there to be some rotation of the

Jan 5

xx x, Michael Jackson2

12/27/24

reconstruct the β-phase

I do not think that DREAM3D-NX has these capabilities. There might be some unsupported/experimental

unread,

reconstruct the β-phase

I do not think that DREAM3D-NX has these capabilities. There might be some unsupported/experimental

12/27/24

guofeng han, … Michael Jackson9

12/20/24

Rotating an RVE Created from EBSD Data

There are example pipelines included with DREAM.3D version 6.5.171 that show how to reconstruct the

unread,

Rotating an RVE Created from EBSD Data

There are example pipelines included with DREAM.3D version 6.5.171 that show how to reconstruct the

12/20/24

李宜蓁, Michael Jackson2

12/16/24

**Does the XY-Plane in DREAM.3D Models Directly Correspond to the EBSD Plane?**

In general it should. But when you create the model for rolled microstructure you can change the

unread,

**Does the XY-Plane in DREAM.3D Models Directly Correspond to the EBSD Plane?**

In general it should. But when you create the model for rolled microstructure you can change the

12/16/24

guofeng han, Michael Jackson2

12/16/24

Refining the Periodicity of an RVE Generated from Experimental EBSD Data

There are not any tools that I am aware of currently. This would make in interesting addition to make

unread,

Refining the Periodicity of an RVE Generated from Experimental EBSD Data

There are not any tools that I am aware of currently. This would make in interesting addition to make

12/16/24

LONG ZHANG, Michael Jackson4

12/12/24

reconstruct real microstructures

Dear Long, What you are looking to do is to “Segment” the EBSD data into 'Features' (grains)

unread,

reconstruct real microstructures

Dear Long, What you are looking to do is to “Segment” the EBSD data into 'Features' (grains)

12/12/24

Rubaiyat, Michael Jackson2

12/11/24

Microstructure from ASCII data having negative coordinate values

Dear Rubaiyat, You can certainly create a vertex geometry out of the data but my guess is that the

unread,

Microstructure from ASCII data having negative coordinate values

Dear Rubaiyat, You can certainly create a vertex geometry out of the data but my guess is that the

12/11/24

Study Boy, … Michael Jackson14

12/3/24

Constructing a microstructure of layered( lamellar) grains

This is not a solved problem inside of DREAM3D (-NX). You will probably have to find another solution

unread,

Constructing a microstructure of layered( lamellar) grains

This is not a solved problem inside of DREAM3D (-NX). You will probably have to find another solution

12/3/24

fari...@gmail.com

11/27/24

Creating C3D10 element using GMSH in Dream3D

Hi Dream3D users, I tried to create a tetrahedral mesh in Dream3D using the GMSH package. By default,

unread,

Creating C3D10 element using GMSH in Dream3D

Hi Dream3D users, I tried to create a tetrahedral mesh in Dream3D using the GMSH package. By default,

11/27/24

weijian gao, … Michael Jackson5

11/26/24

Generating random multi-crystal 2D plane with one hole at center.

Hello, This is a non-trivial process and involves data fusion techniques to align the STL file to the

unread,

Generating random multi-crystal 2D plane with one hole at center.

Hello, This is a non-trivial process and involves data fusion techniques to align the STL file to the

11/26/24

YuLin Elias, Michael Jackson4

11/26/24

How to build a virtual crystal model of two materials layered together

Thanks for your advice. Michael Jackson <mike.j...@bluequartz.net> 于2024年11月21日周四 10:33写道：

unread,

How to build a virtual crystal model of two materials layered together

Thanks for your advice. Michael Jackson <mike.j...@bluequartz.net> 于2024年11月21日周四 10:33写道：

11/26/24

Jack, … Anthony Rollett3

11/26/24

Triple Junctions

I think you can use the surface mesh generation filter (that fits a triangular surface mesh to the

unread,

Triple Junctions

I think you can use the surface mesh generation filter (that fits a triangular surface mesh to the

11/26/24

Kriz, … Michael Jackson5

11/26/24

Clarification on Resolution Units

Hello, If you want to synthesize a single-crystal you do not really need StatsGenerator for that. You

unread,

Clarification on Resolution Units

Hello, If you want to synthesize a single-crystal you do not really need StatsGenerator for that. You

11/26/24

xx x, Michael Jackson2

11/25/24

Internal layer division of grains

There is a filter called “Insert Transformation Phase” that might do what you want it to do. -- Mike

unread,

Internal layer division of grains

There is a filter called “Insert Transformation Phase” that might do what you want it to do. -- Mike

11/25/24

xx x, Michael Jackson6

11/25/24

Grain division for help

I would look at using the “Insert Transformation Phase” filter and see if that will do what you are

unread,

Grain division for help

I would look at using the “Insert Transformation Phase” filter and see if that will do what you are

11/25/24

11/23/24

problem about generating synthetic microstructure on an STL file.

hi michael, Here are some questions I would like to ask you. When I tried to model using your pipline

unread,

problem about generating synthetic microstructure on an STL file.

hi michael, Here are some questions I would like to ask you. When I tried to model using your pipline

11/23/24

Maria Lee, Michael Jackson6

11/22/24

Grain Size Analysis after Simulation

Dear Michael, Thank you for your help and suggestions. I found the prepackaged Small IN100 set of

unread,

Grain Size Analysis after Simulation

Dear Michael, Thank you for your help and suggestions. I found the prepackaged Small IN100 set of

11/22/24

Search

Clear search

Close search

Google apps

Main menu