Dragino-user

Hi, Javier, Thank you for reaching out and providing detailed information about your issue. The

Yes, the regular data is being sent to the sensors every 20 minutes (default). I have learned, that

Hi, AB, Thank you for your inquiry. Yes, Dragino LoRaWAN end-devices fully support the LinkCheckReq

Hi, Cedric, Thank you for your inquiry. 1. Regarding COUNTMOD=1 (reset counter after uplink): The

Hi, Pete The system used by MS48 is different from the main chip. The mirror link and flash steps of

I've opened port 1700 through the clients router and set the MS48 with a static IP with no change

While troubleshooting instability of a MS48 I've noted that OTA updates have hung due to 1

Hi, Anna, Thank you for your feedback and suggestion regarding the datalog functionality. Currently,

Hi, You can use the gateway's deveui filter to filter out unnecessary deveui join packets Follow

Thanks for clarifying Ting Best regards --- Juan Andrés Cabrera Lillo 📱 España: +34 672624219 📱 Chile

What is the voltage for the E+? I have a load cell that indicates a need for "10v(DC/AC)"

Hi, Steven, In firmware V1.3.2, the AT+NEWLINE command has been added. You can find detailed

Hi, Anna, Great questions! Here's a simple explanation: 1. What is f_cnt? It's the Frame

Hi, Anna, Thank you for bringing this to our attention. We understand your concern about the images

Hi, Pooja, Thank you for reaching out! Setting up your LHT65S with an existing LoRaWAN gateway is a

Very good information, thank you very much (although you should add that into the wiki also). I'm

Hi, Geert Did you configure something that caused the database to be lost? Currently, lps8v2 does not

I had the same thing and I did eventually work it out as B JG says. But as a temporary measure I just

Hi,pcza If the TTN server keeps publishing downlink information. In this case it is automatically

Send a downlink to set the probe model, for example: 08 00 04 will set it to 4 meters. Cheers, Manuel

Hi, Philipp Yes you can test the installation and use OpenConnect, to set up firewall rules you can

Hi, Tobias Please refer to this example: https://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%

Hi, Halvor The only difference between MS48-LR and LPS8v2 is the modbus function, the other functions

Ok thank you for help. On Sunday, March 9, 2025 at 5:59:46 PM UTC-7 kil...@dragino.cc wrote: Hi,

Hi, Martin, Yes, you can use AT+PRO=1,5 //Use COAP Connection & Json Payload. ThingsBoard can

Hi,vishnu Sorry, currently the minimum trigger values of AC1 and AC2 cannot be separated. Thanks Best

Hi, I have a problem to measure a sapflow sensor sdi-12 from IMPLEXX.io, connected to a dragino SDI-

Hi,vishnu This device does not have this feature yet. This device is open source firmware. If you

Hi, Ricardo, Maybe you failed to write the certificate. ①First burn the firmware used to write the

Hi,Miguel 1. It may be that the downlink failed and the device did not receive this command. Can you