V Guard Du 1000 Smart User Manual

0 views

Skip to first unread message

Margy Eilbeck

unread,

Aug 3, 2024, 3:37:04 PM8/3/24

to drafmotahy

- Automatic low voltage disconnect and reconnect when conditions are safe
- 100 Amp continuous load capacity
- Mechanical latch requires no current to maintain status
- Factory conﬁgurable parameters
- Disconnect and reconnect veriﬁcation with automatic retry
- Momentary low-side switch input toggles between connected and disconnected state
- Quick connect terminals for easy wire installation

The Battery Guard 1000 Kit is a plug and play system designed to prevent batteries from low voltage conditions and potential damage. Included in the kit is a sleek stainless steel switch with a built in LED indicator that allows the user manual-control as well as feedback status of the battery system.

Like so many Departments, the Oakland University Police Department has been plagued with dead batteries in our patrol cars for several years. We have tried every approach thinkable to address this issue with no solution, until now. We recently found out about the battery guard devices produced by Intellitec Products. We listened to a brief presentation on how this device works and we were instantly hooked. We have placed these devices on several of our patrol cars and the device works exactly as promised. No more dead batteries for us!! We are extremely happy with the results of the Battery Guard 1000.

We use the Intellitec Battery Guard system on a customer's fleet vehicle that were previously having issues with dead batteries over a weekend with work tools and equipment being left on or charging in the vehicle. The battery guard has saved our customer from needing to replace dead batteries in the field sooner than necessary and has saved them both time and money in the long run. Great quality product, we have yet to have a warranty issue from the customer on an installed unit, and great customer service every time.

AQ Guard Smart 1000 is a compact and cloud-enabled air quality measurement device. The system is designed for the requirements of outdoor air measurement in the smart city environment to improve granularity while maintaining high comparability to official measurements for environmental monitoring and health protection.

The system works on the principle of 90-degree scattered light measurement on the single particle, based on the EN 16450 certified Fidas 200 technology. Signal duration and shape are taken into account.

The Fidas technology used here also has decisive advantages over competitive products concerning long-term stability and function monitoring. In particular, the high size resolution of more than 200 channels enables a continuous check of the size deviation according to a patented procedure. It provides additional information on the aerosol composition and origin, like no other device on the market.

The AQ Guard Smart System has Ethernet, WLAN, and cellular connectivity and supports ASCII and MODBUS protocols for communication. All data is continuously recorded and can be retrieved retrospectively and in real-time.

The AQ Guard Smart 1000 supports model calculations of the current fine dust pollution and forecasts. These will be based on stricter limit values in the future, requiring lower uncertainties for local measurements.

The device offers manufacturers and users of low-resolution sensors a comparison option and, thus, a plausibility check before the measured values are made available for further processing in formation and dispersion studies.

AQ Guard Smart 100 can be connected to the cloud platform MyAtmosphere . Private and government operators can retrieve current readings directly without delay. Furthermore, the data can be compared with the measured values of other devices. MyAtmopshere can be integrated into its systems/environments via an optional programming interface (API).

Optionally, the AQ Guard Smart 1000 can be equipped with a sunshade made of white powdered aluminum to reduce direct sunlight and overheating of the device. We recommend this in areas with high continuous sunlight and simultaneously high ambient temperatures. The sunshield can also be used as protection for the device itself, e.g., on construction sites or other areas (wind/snowfall/rain).

The following data protection information applies to the use of this website.
Thank you for visiting our website! We appreciate your interest in our company and products. We respect your private sphere and ensure that your personal data will be protected by processing it in accordance with these data protection provisions and the applicable data protection legislation.

You may enter your personal data on our website in order to contact us. It is only mandatory to enter the information marked with an asterisk. Providing further information may be helpful for processing your request, but is not mandatory (voluntary statements). This information will only be used and saved with your consent for the purpose of processing your message (Art. 6 Para. 1 Clause 1 Letter a GDPR). The information will not be used for other purposes or transferred to third parties unless you expressly agree for us to do so (consent).

Texts, images, graphics and the layout of this site are subject to German and international copyright law. Unlawful use, reproduction or transfer of individual content items or entire pages will be prosecuted under criminal and civil law.