tanya setup modem e220 di fedora 11
12 views
Skip to first unread message
greend coded
Feb 19, 2011, 4:32:08 AM2/19/11
to Dinus Open Source Community
//mau tanya, saya barusan setting modem huawei e220 di fedora 11, tapi
gak sukses, berikut list nya,, tolong bantuannya yah :)
[root@localhost dev]# lsusb
Bus 001 Device 003: ID 0cf2:6230 ENE Technology, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 1871:0306 Aveo Technology Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220
HSDPA Modem
[root@localhost dev]# wvdialconf /etc/wvdial.conf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: huawei
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB1<*1>: Modem Identifier: ATI -- Manufacturer: huawei
ttyUSB1<*1>: Speed 9600: AT -- OK
ttyUSB1<*1>: Max speed is 9600; that should be safe.
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
[root@localhost dev]# vi /etc/wvdial.conf
[root@localhost dev]# /etc/init.d/net
netconsole netfs netplugd network
[root@localhost dev]# /etc/init.d/net
netconsole netfs netplugd network
[root@localhost dev]# /etc/init.d/network stop
Shutting down interface eth0: [ OK ]
Shutting down interface wlan0: [ OK ]
Shutting down loopback interface: [ OK ]
[root@localhost dev]# wvdial.
bash: wvdial.: command not found
[root@localhost dev]# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected. Waiting for prompt.
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Sat Feb 19 23:02:07 2011
--> Pid of pppd: 3019
--> Using interface ppp0
--> pppd: �.�[08](4�[08]
--> pppd: �.�[08](4�[08]
--> pppd: �.�[08](4�[08]
--> pppd: �.�[08](4�[08]
--> pppd: �.�[08](4�[08]
--> local IP address 10.162.73.197
--> pppd: �.�[08](4�[08]
--> remote IP address 10.64.64.64
--> pppd: �.�[08](4�[08]
--> primary DNS address 10.0.18.38
--> pppd: �.�[08](4�[08]
--> secondary DNS address 10.0.18.42
--> pppd: �.�[08](4�[08]
//proses gak jalan lagi sampai ke proses ini,, tak tunggu lama,,
akhirnya tak stop
//ini list setting nya di file wvdial.conf
[greendcoded@localhost ~]$ cat /etc/wvdial.conf
[Dialer Defaults]
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Phone = *99#
ISDN = 0
Username = 3data
Init1 = ATZ
Password = 3data
Modem = /dev/ttyUSB0
Baud = 9600
gak sukses, berikut list nya,, tolong bantuannya yah :)
[root@localhost dev]# lsusb
Bus 001 Device 003: ID 0cf2:6230 ENE Technology, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 1871:0306 Aveo Technology Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220
HSDPA Modem
[root@localhost dev]# wvdialconf /etc/wvdial.conf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: huawei
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB1<*1>: Modem Identifier: ATI -- Manufacturer: huawei
ttyUSB1<*1>: Speed 9600: AT -- OK
ttyUSB1<*1>: Max speed is 9600; that should be safe.
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
[root@localhost dev]# vi /etc/wvdial.conf
[root@localhost dev]# /etc/init.d/net
netconsole netfs netplugd network
[root@localhost dev]# /etc/init.d/net
netconsole netfs netplugd network
[root@localhost dev]# /etc/init.d/network stop
Shutting down interface eth0: [ OK ]
Shutting down interface wlan0: [ OK ]
Shutting down loopback interface: [ OK ]
[root@localhost dev]# wvdial.
bash: wvdial.: command not found
[root@localhost dev]# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected. Waiting for prompt.
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Sat Feb 19 23:02:07 2011
--> Pid of pppd: 3019
--> Using interface ppp0
--> pppd: �.�[08](4�[08]
--> pppd: �.�[08](4�[08]
--> pppd: �.�[08](4�[08]
--> pppd: �.�[08](4�[08]
--> pppd: �.�[08](4�[08]
--> local IP address 10.162.73.197
--> pppd: �.�[08](4�[08]
--> remote IP address 10.64.64.64
--> pppd: �.�[08](4�[08]
--> primary DNS address 10.0.18.38
--> pppd: �.�[08](4�[08]
--> secondary DNS address 10.0.18.42
--> pppd: �.�[08](4�[08]
//proses gak jalan lagi sampai ke proses ini,, tak tunggu lama,,
akhirnya tak stop
//ini list setting nya di file wvdial.conf
[greendcoded@localhost ~]$ cat /etc/wvdial.conf
[Dialer Defaults]
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Phone = *99#
ISDN = 0
Username = 3data
Init1 = ATZ
Password = 3data
Modem = /dev/ttyUSB0
Baud = 9600
Alan Budi
Feb 25, 2011, 3:55:49 AM2/25/11
to dos...@googlegroups.com
Itu dah dapat IP dynamicnya mas..
--
Harusnya dah bisa langsung dipake..
kalo make WVdial.. memang sehabis dapet IP trus berhenti..
kecuali Disconect,,
--
www.doscom.org | milis.doscom.org
tealinuxos.doscom.org | twitter.com/doscomedia
~ Dinus Open Source Community :.
--
----------------------------------------------------------------------------------------------------------------------
"Orang yang paling bahagia ialah orang yang dapat selalu bersyukur dalam kondisi apapun"
masas dani
Feb 25, 2011, 9:17:05 AM2/25/11
to dos...@googlegroups.com
itu sudah sukses, memang proses wvdial terhenti sampai situ, artinya
kita masih mendapatkan IP dari ISP...coba saja langsung membuka
browser atau ping ke google..pengalaman saya pake fedora 14.. dns dari
wvdial g bisa otomatis mengganti dns yang lama dari
network-manager..jadi harus kita ubah sendiri
kita masih mendapatkan IP dari ISP...coba saja langsung membuka
browser atau ping ke google..pengalaman saya pake fedora 14.. dns dari
wvdial g bisa otomatis mengganti dns yang lama dari
network-manager..jadi harus kita ubah sendiri
gedit /etc/resolv.conf
isikan dns dengan dns yg terdetaksi dari wvdia anda,
nameserver 10.0.18.38
nameserver 10.0.18.42
simpan dan coba ping ke google..
semoga berhasil
On Sat, Feb 19, 2011 at 4:32 PM, greend coded <green...@gmail.com> wrote:
> --> pppd: �.�[08](4�[08]
> --> pppd: �.�[08](4�[08]
> --> pppd: �.�[08](4�[08]
> --> pppd: �.�[08](4�[08]
> --> pppd: �.�[08](4�[08]
> --> local IP address 10.162.73.197
> --> pppd: �.�[08](4�[08]
> --> remote IP address 10.64.64.64
> --> pppd: �.�[08](4�[08]
> --> primary DNS address 10.0.18.38
> --> pppd: �.�[08](4�[08]
> --> secondary DNS address 10.0.18.42
> --> pppd: �.�[08](4�[08]
--
regards, masas dani
@masasdani
http://www.facebook.com/mexezdhanie
http://mexez.wordpress.com
http://www.doscom.org
http://tealinuxos.doscom.org
http://osum.sun.com/groups/udinus
greend coded
Feb 28, 2011, 10:50:58 AM2/28/11
to dos...@googlegroups.com
udah saya coba browsing tapi gak bisa,,
mungkin di dns nya kali yah,, ntar saya cek lagi dah,,
mungkin di dns nya kali yah,, ntar saya cek lagi dah,,
all : terima kasih atas panduaanya dah :)
Chaerul Umam
Mar 2, 2011, 7:04:04 AM3/2/11
to dos...@googlegroups.com
haha.....
wah... mase dari kemaren ngoprek modem terus ik..... baru lagi ya mas.. :D
2011/2/28 greend coded <green...@gmail.com>
s nya kali yah,, ntar saya cek lagi dah,,
all : terima kasih atas panduaanya dah :)
greend coded
Mar 4, 2011, 1:29:37 PM3/4/11
to dos...@googlegroups.com
nggak juga,, modem pinjaman yang kemarin2,, haha
Reply all
Reply to author
Forward
0 new messages