Datasheets

[feurig]

I uploaded the datasheets for the motordrivers on the motor boars as
well as the darlington arrays from the workshop.
They are in the files section.

[fca...@gmail.com]

Do you have any pics or diagrams of the finished motorboard? Relays,
Half H, and transistors all wired up? I am slow, and cold, and the
wolves are after me.

[Donald Delmar Davis]

Aidan and I shot an assembly of the motor boards this morning. 

I will get it up here or on the dorkbot site soon.

[Donald Delmar Davis]

Frank,

Check out. http://dorkbotpdx.org/blog/feurig/motorboard_buildout and let me know if that covers it. 

Don.

On Aug 25, 2008, at 3:01 PM, fca...@gmail.com wrote:

[fca...@gmail.com]

Don, that page rocks in too many ways to describe. I'm not sure i
could have asked for a single thing more. Lets see how that stands up
when i build it though :) Just kidding. It looks great. Thanks for all
the hard work. If there is anything i can ever do to help out please
let me know.

-F

On Aug 25, 9:35 pm, Donald Delmar Davis <d...@tempusdictum.com> wrote:
> Frank,
> Check out.http://dorkbotpdx.org/blog/feurig/motorboard_buildoutand  

> let me know if that covers it.
>
> Don.

[Frank Canaan]

Actually one thing. You may want to explain what a "via" is. It sounds more obtuse than "through hole" or "Metal glob connecting 2 sides of a pcb".

--
-Frank Canaan
fca...@gmail.com

[Donald Delmar Davis]

You just explained it.  :)

If you manufactured these boards they would actually stuff a metal cylinder in the hole which connects the two sides electrically since I only have a drill bit it winds up being a piece of wire that you have to solder on both sides of the board. 

Technically via means a way from the signal to get from copper plain to coper plain.

[fca...@gmail.com]

If you ever need help drilling boards out, let me know. I have a drill
press at home.

On Aug 26, 1:25 pm, Donald Delmar Davis <d...@tempusdictum.com> wrote:
> You just explained it.  :)
>
> If you manufactured these boards they would actually stuff a metal  
> cylinder in the hole which connects the two sides electrically since I  
> only have a drill bit it winds up being a piece of wire that you have  
> to solder on both sides of the board.
>
> Technically via means a way from the signal to get from copper plain  
> to coper plain.
>
> On Aug 26, 2008, at 12:40 PM, Frank Canaan wrote:
>
> > Actually one thing. You may want to explain what a "via" is. It  
> > sounds more obtuse than "through hole" or "Metal glob connecting 2  
> > sides of a pcb".
>

> > On Tue, Aug 26, 2008 at 7:50 AM, <fcan...@gmail.com> wrote:
>
> > Don, that page rocks in too many ways to describe. I'm not sure i
> > could have asked for a single thing more. Lets see how that stands up
> > when i build it though :) Just kidding. It looks great. Thanks for all
> > the hard work. If there is anything i can ever do to help out please
> > let me know.
>
> > -F
>
> > On Aug 25, 9:35 pm, Donald Delmar Davis <d...@tempusdictum.com> wrote:
> > > Frank,
> > > Check out.http://dorkbotpdx.org/blog/feurig/motorboard_buildoutand
> > > let me know if that covers it.
>
> > > Don.
> > > On Aug 25, 2008, at 3:01 PM, fcan...@gmail.com wrote:
>
> > > > Do you have any pics or diagrams of the finished motorboard?  
> > Relays,
> > > > Half H, and transistors all wired up? I am slow, and cold, and the
> > > > wolves are after me.
>
> > > > On Aug 25, 12:28 pm, feurig <d...@tempusdictum.com> wrote:
> > > >> I uploaded the datasheets for the motordrivers on the motor  
> > boars as
> > > >> well as the darlington arrays from the workshop.
> > > >> They are in the files section.
>
> > --
> > -Frank Canaan

> > fcan...@gmail.com