starting to test heyu and domus on a pogoplug

[Brad]

I found some pogoplugs on amazon for cheap, $18.56. So, thought I would start to play.

I have heyu compiled under the pogoplug and running my config using a dummy device. Have not attached a CM11A yet.

Here are the instructions for heyu build as I wanted to get them written down before I forget.

Model: Pogoplug Mobile (this is a series 4 without the USB3 and eSata)
Distro: ArchLinux ARMv5
Instructions for install of Arch Linux ARM: http://archlinuxarm.org/platforms/armv5/pogoplug-series-4 (go to the installation tab)
Other Steps:
1) changed root password
2) install the sudo package
3) add a normal user
4) add the normal user to the sudo package

As the normal user, do the following:
Get the Arch Linux AUR PKGBUILD file for heyu 2.9.2 from the Arch Linux AUR site (google it)

modify the PKGBUILD file for they heyu 2.9.2 and replace the version in the file from 2.9.2 to 2.10

build the pacakge using: makepkg -Acs --skipinteg (need to do the skip integrity checks as there is something wrong with the heyu tar file m5sums)

install the pacakge: sudo pacman -U heyu-2.10-1-arm.pkg.tar.xz

create the /etc/heyu directory, give access to whatever user will start it

populate with your config files

create the /var/tmp/heyu directory

give access to the user for /var/lock

If you run heyu as root the access issues are not a problem, but running as root is not recommended.

Will be trying to do the whole setup with apache and domus.Link soon.

Brad