Release Cause: No Ingress Resource Found

[The Voip Supplier]

[Anne Kwong]

Hi 

You are getting this error because in your ingress trunk, you did not setup prefix, and the corresponding rate table and routing plan. 

Please refer to https://cookbook.denovolab.com/your-first-call-with-class-4-fusion/create-ingress-trunk

Thanks,

Anne

On Fri, Dec 3, 2021 at 4:46 PM The Voip Supplier <thevoips...@gmail.com> wrote:

--
You received this message because you are subscribed to the Google Groups "dnl-class4-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dnl-class4-us...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dnl-class4-user/f1344516-609a-4093-b3e2-d11af406736fn%40googlegroups.com.

[The Voip Supplier]

I have added the  setup prefix, and the corresponding rate table and routing plan but still getting the error. 

Please see screenshot attached.

[The Voip Supplier]

i was able to resolve the rate plan issue but no facing a new issue.....please check

[Anne Kwong]

Hi 

You have specified the rate table " US CC 0.006 " as DNIS and US JD . 

That means you are using US jurisdictional rating.  So, inside the rate table, you need to specify the rate for inter and intra. 

Otherwise, you will get errors.

2nd problem is in the routing plan, you don't need to include tech prefix.  You just need to do:

Here now it shows everything works. 

On Sun, Dec 5, 2021 at 11:11 PM The Voip Supplier <thevoips...@gmail.com> wrote:

Can you give an example of the ani and dni prefix you are referring to? 

Sent from my iPhone

On Dec 6, 2021, at 5:35 AM, Anne Kwong <anne.de...@gmail.com> wrote:



Hi, 

Inside your Routing Plan, you need to add a prefix and define routing ( static or dynamic ) for that prefix. 

Then, within either static routing or dynamic routing, you need to define the vendor trunks to use. 

Thanks,

Anne

On Sun, Dec 5, 2021 at 1:44 PM The Voip Supplier <thevoips...@gmail.com> wrote:

I have added the  setup prefix, and the corresponding rate table and routing plan but still getting the error. 

Please see screenshot attached.

On Saturday, December 4, 2021 at 11:22:22 PM UTC-6 anne.de...@gmail.com wrote:

Hi 

You are getting this error because in your ingress trunk, you did not setup prefix, and the corresponding rate table and routing plan. 

Please refer to https://cookbook.denovolab.com/your-first-call-with-class-4-fusion/create-ingress-trunk

Thanks,

Anne

On Fri, Dec 3, 2021 at 4:46 PM The Voip Supplier <thevoips...@gmail.com> wrote:

--
You received this message because you are subscribed to the Google Groups "dnl-class4-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dnl-class4-us...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dnl-class4-user/f1344516-609a-4093-b3e2-d11af406736fn%40googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "dnl-class4-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dnl-class4-us...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/dnl-class4-user/37fd7c3f-efe1-4422-bd2c-8d606335bb33n%40googlegroups.com.

[Ashu Patidar]

Hello

Here are same basic steps which will help you in fixing this issues

Follow this doc - https://doc.denovolab.com/display/CLAS4v6/Getting+started

On Saturday, December 4, 2021 at 6:16:08 AM UTC+5:30 thevoips...@gmail.com wrote:

[Ashu Patidar]

Please reinstall switch and check