DM48X firmware v1.14

[Erik]

A firmware update (v1.14) is available for the DM48X.

Includes the following upgrades compared to v1.10:

• Screen turns off after long periods of inactivity (5 hours), to prevent screen burn-in e.g. when left for charging unattended
  
• Three new default tunings added: diminished, wholetone and bebop (note that these will become available only after resetting tunings to factory defaults)
  
• Modulation and bend (pitch) sensitivity can now be adjusted individually for the ribbon controller
  
• A “Swam” global preset was added, to facilitate playing with SWAM instruments from Audio Modeling (use this preset together with default settings in SWAM apps on iOS)
  
• Swam and Geoswam (for SWAM in GeoShred) presets now default to using the ribbon in “Bend/mod” mode, such that swiping left causes bending while right controls vibrato
  
• Minor interface tweaks
  

Note: Presets need to be reset to factory defaults after installing. Tunings do not require resetting unless you want the new default tunings.

Warning: DM48X only - installing this update on a DM48 will render the instrument unusable.

[Ben Green]

Hi Erik, are there any more firmware updates planned for original DM48 users?

Thanks!

Ben

--
You received this message because you are subscribed to the Google Groups "DM48/DM48X Digital Chromatic Harmonica User Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dm48-digital-chromatic...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dm48-digital-chromatic-harmonica/3e8a4428-b4ef-495c-afee-35c381ee2969n%40googlegroups.com.

[Erik L]

Most likely not. The firmware flash is in fact fully packed and the last few updates required optimization to allow a bit more code to be squeezed in. Also, I consider it to be quite complete functionality-wise, within the limits of the hardware. 

In the DM48X only a fraction of the memory is used at the moment.

Erik

On 17 Apr 2023, at 17:31, Ben Green <sydi...@gmail.com> wrote: