Fwd: FW: Open Walk-in @ RBEI on 11th Feb 2017

[sibaram prasad Padhy]

---------- Forwarded message ----------
From: "Padhy Sibaram Prasad (RBEI/ECG14)" <SibaramPr...@in.bosch.com>
Date: 10-Feb-2017 17:01
Subject: FW: Open Walk-in @ RBEI on 11th Feb 2017
To: "sibaram1783padhy (sibaram1...@gmail.com)" <sibaram1...@gmail.com>
Cc:



Best regards

Sibaram Prasad Padhy
RBEI/ECG1

Tel. +91(80)6657-5241

From: Buddy Referral (RBEI/HRL-M)
Sent: Wednesday, February 08, 2017 12:39 PM
To: RBEI/BE2-Associates <RBIN.E...@bcn.bosch.com>
Subject: Open Walk-in @ RBEI on 11th Feb 2017


[cid:image001.jpg@01D1ACF9.05D2F2C0]


Dear Boschler,

Make your workplace better with your friends around. Here is an opportunity to refer your friends for the below requirements.




Open Walk-In @ RBEI:

Date                          :   Saturday, 11th February 2017
Time                         :   9:00 AM to 12:00 Noon
Venue                      :   Robert Bosch Engineering and Business Solutions Private Ltd.
                                      123, Industrial Layout,Hosur Road, Kormangala,
                                      Bangalore - 560095.

Contact Person    :   Shobitha A Chawhan (HRS2-IN)
Carry                        :  Resume, Passport size color photograph, Photo Id Proof and Buddy Referral mail



Job Title

Skill-set

Qualification

Experience

Work Location



Model Based Testing

* Experience in MiL-SiL testing
* Development of Test Cases or Testing experience in Matlab/Simulink at Unit or Functional level
* Programming experience in C / Python
* Experience with TPT
* Knowledge of automotive systems like powertrain, ECU's, Test case generation & Documentation of results
* Ability to learn and adapt to evolving tools / technologies
* Flexibility to travel & work at customer (OEM) location within India or abroad for both short term & long term

B.E / Masters in Electronics & Communications / Electronics / Electrical / Computer Engineering

2 - 8 Years

Bengaluru



Diagnostics Testing

* Experience in ODX and CANdela Studio
* Good knowledge in UDS on CAN - General requirements, Flashing sequence & Fault management preferable
* Experience in Vector tools such as CANdela, CANoe, CANdiva & ODX Studio.
* HIL testing experience in Closed Loop / Open Loop testing of ECU's in NI / DSPace / LABCAR HIL test system
* ECU Diagnostics and Softing DTS8 Monaco preferable
* Experience in C, CAPL / Vector tools preferable
* Test specification design, test execution for Hardware-in-loop testing
* Diagnostics validation for Central gateway ECU
* Ability to learn & adapt to evolving tools / technologies
* Flexibility to travel & work at customer (OEM) location within India or abroad for both short term & long term

B.E / Masters in Electronics & Communications / Electronics / Electrical / Computer Engineering

2 - 8 Years

Bengaluru



HiL Testing

* Vehicle HiL testcase development and Testing
* Experience in dSpace / NI / ETAS HIL hardware and software tools
* ECU Diagnostics, Fault simulation is preferable
* Experience in INCA, CAN tools
* Experience in HiL Test automation
* PROVEtech knowledge is preferable
* Knowledge of VB.NET Script development in Automotive testing
* Exposure to Matlab / Simulink / Stateflow
* Ability to learn and adapt to evolving tools/technologies
* Flexibility to travel & work at customer (OEM) location within India or abroad for both short term & long term

B.E / Masters in Electronics & Communications / Electronics / Electrical / Computer Engineering

2 - 8 Years

Bengaluru



Verification & Validation of Body, Chassis Control Software & MBT

* Requirement Specification Enhancement for Body & Chassis ECUs
* Requirement Analysis, develop test strategies & test specification for ECU V&V.
* Experience in test bench setup for ECUs - Component testing, Integration Testing & Diagnostics Testing
* Experience on model based development & testing processes using Matlab, Simulink & Stateflow
* Experience in testing of ECU Control Software in MIL (Model-in-loop), HIL stages.
* Should have worked with CAN tools like CANoe, CAPL scripting, Test Automation Editor(TAE)
* Good grasping of Programming / Scripting
* Ability to learn and adapt to evolving tools / technologies
* Flexibility to travel & work at customer (OEM) location within India or abroad for both short term & long term

B.E / Masters in Electronics & Communications / Electronics / Electrical /
Computer Engineering

2 - 8 Years

Bengaluru



Diagnostics Testing, Flashloader

* Good knowledge of CAN & FlexRay communication protocol
* Knowledge of UDS or KWP
* Experience in bootloader testing
* Good grasping of Programming / Scripting
* Develop test cases or testing experience in Matlab is preferable
* Programming or scripting experience in C / Python is preferable
* Experience in CANoe, CANalyser CAPL scripting
* Experience in AUTOSAR related topics
* Ability to learn and adapt to evolving tools / technologies
* Flexibility to travel & work at customer (OEM) location within India or abroad for both short term & long term

B.E / Masters in Electronics & Communications / Electronics / Electrical / Computer Engineering

2 - 8 Years

Bengaluru



HiL Engineer - Modelling and Simulation
(Develop plant models to simulate vehicle behavior)

* Very strong knowledge in control systems
* Experience in using modelling tools (ex: MATLAB-SIMULINK, ASCET, AMESIM, etc)
* Functional testing of automotive embedded systems
* Experience with SiL, MiL & HiL testing (both manual & automated)
* Experience with open-loop and closed-loop simulators (ex: ETAS, dSPACE, NI, etc)
* Functional knowledge of various automotive and powertrain systems
* Knowledge of communication protocols and diagnostic services (ex: CAN, LIN, FlexRay, KWP2000, etc)
* Knowledge of development life cycle, configuration management, change management &
* Quality processes
* Excellent analytical, logical & problem-solving skills with innovative mindset
* Good written and verbal communication* Team player
* Flexible to travel or work from customer locations (both domestic & international)

B.E / Masters in Electronics & Communications / Electronics / Electrical / Computer Engineering / B tech / M tech

2 - 6 Years

Bengaluru



ECU Networking Architecture Team/In Vehicle Communication Testing

* Good knowledge of Inter ECU communication concepts, Protocols - CAN, FlexRay, LIN, CANFD & Ethernet
* Good knowledge of AUTOSAR / OSEK methodologies, ECU extracts, RTE, VFB, Communication Layer
* Good understanding of various networking file format e.g. CANdbc, LDF, Fibex etc
* Experience in testing the multiple networks in star architecture
* Implement the network requirement & deliver ECU Extracts with zero defects
* Ability to learn and adapt to evolving tools / technologies
* Flexibility to travel & work at customer (OEM) location within India or abroad for both short term & long term

B.E / Masters in Electronics & Communications / Electronics / Electrical / Computer Engineering

2 - 8 Years

Bengaluru




 Note:

*         Short listing of CVs will be done at the venue and only shortlisted candidates will be interviewed.

*         Candidates should mention the Referrer's Name & Employee no. on their profiles.

*         Please do not send the profiles to Buddy Referral. Suitable candidates can directly walk-in to the above mentioned venue.



Happy Referring!

[footer2.gif]