Bancika - Please read

[Doug Hoffman]

I have added a new board on my amp forum for DIYLC

I make custom turret boards and eyelet boards for my customers
I have created a program that can take a .diy file and analyze it
My program pulls out the board and eyelets and ignores everything else

People can then have that board made on my CNC machine

My amp forum DIY board is here
https://el34world.com/Forum/index.php?board=26.0

There are some youtube video links in the board above showing how my on line program will work once I finish it

My youtube playlist for DIYLC is here
https://www.youtube.com/playlist?list=PLVvDFekIYJjeQX4On2q6w4f-nuicAhgpN

I will be adding more videos as I go


Also, I really would like to have a custom line made that defines where people may want a longer custom board cut

They would only use that line to show me where a long board is cut into shorter boards
Using the stock line in DIYLC won't work because you can use lines anywhere in a drawing
My program would not be able to figure out which line is actually where a board should be cut

One of my youtube videos explains how the board cuts should work

Bancika, I would be interested in any comments you may have about this
Contact me and I will give you the link to my custom program on my server
You can test it and let me know if you like it
Thanks

Doug

[baddriddi...@gmail.com]

hi there, i have just ordered my first cnc router and i'm used to using DYLC, it's simple and i can do every task i need to design my units, from pcbs to faceplate labeling and layouts. I'm searching for the more conveniant simple and fast way to  convert my pcbs designed on dylc into files ready to for engraving in gcode. maybe your software could be the solution, may i get in touch with you? baddr...@live.fr. thx

[Doug Hoffman]

Are you asking me?