Dixprs on a sheevaplug

[Warren Wheeler]

I have debain installed and Dixprs installed. My biggest problem is the gap between my ears.  I'm planning on running the system with a KPC-3+ in Kiss mode through the standard USB port.  The problem I'm hitting right now is how to define the port in the config.txt file.  I just don't know linux well enough to figure out how to find the port then declare it correctly in the file.  Any help would be appreciated.

[Bela Markus]

Hi

first identify port USB serial port. It is most likely /dev/ttyUSB0 if you have only one USB serial device attached. Then use ttyUSB0 in the DIXPRS config file.

Regards... Bela, HA5DI

2014.02.26. 5:16 keltezéssel, Warren Wheeler írta:

I have debain installed and Dixprs installed. My biggest problem is the gap between my ears.  I'm planning on running the system with a KPC-3+ in Kiss mode through the standard USB port.  The problem I'm hitting right now is how to define the port in the config.txt file.  I just don't know linux well enough to figure out how to find the port then declare it correctly in the file.  Any help would be appreciated.

--
Azért kapta ezt az üzenetet, mert feliratkozott a Google Csoportok szolgáltatásbeli dixprs csoportra.
Az erről a csoportról és az ahhoz kapcsolódó e-mailekről való leiratkozáshoz küldjön egy levelet a következő címre: dixprs+un...@googlegroups.com.
További lehetőségekért látogasson el a(z) https://groups.google.com/groups/opt_out címre.

A(z) üzenetben nem található vírus.
Ellenőrizte: AVG - www.avg.com
Verzió: 2014.0.4259 / Vírus adatbázis: 3705/7124 - Kiadás dátuma: 2014.02.25.

[Warren Wheeler]

Well I know I have something wrong in the config.  I'm getting the following server side errors when I try and access the web server page

*** DIXPRS 2.2.2 - 05-09-2012 - (pid=2886)

Missing port
Radio port configuration error
*** IGATE process started [host=noam.aprs2.net, port=14580] (pid=2889)
*** WEBSR process started [port=81] (pid=2890)

*** Connection established
*** Connection successful to T2IAD
Traceback (most recent call last):
  File "/usr/lib/python2.7/wsgiref/handlers.py", line 85, in run
    self.result = application(self.environ, self.start_response)
  File "/usr/local/dixprs/dixpwebserver.py", line 123, in webmain
    v = "AIR%s - %s" % (dp['ports'][0][0], dp['ports'][0][1])
IndexError: list index out of range
192.168.1.101 - - [26/Feb/2014 09:50:33] "GET / HTTP/1.1" 500 59


my web server config is

[WEBSERVER]

# Mandatory parameters

# WEB server port, no default
port=81

and the radio section is

[RADIO]

# Mandatory parameters

# Interface type
INTERFACE=KISS

# Serial port
#PORT=/dev/ttyUSB0

# Serial port speed
SPEED=9600

# Optional parameters

# Modem speed, default is 1200
#SIGNALRATE=1200

No radio currently connected

[Lee Bengston]

Hi - you have the line specifying the serial port commented out. The beginning "#" needs to be removed.

Regards,
Lee - K5DAT

- sent from my mobile phone

--

[Warren Wheeler]

Thanks Lee.  that got it.
http://www.nwaprs.info/
Now for a seemingly "left field" question.  I live up in Washington state and we have a web page http://www.nwaprs.info/ with the local preferred configurations on it.  I'm wondering if I need to worry about these settings in my config or in the KPC-3+ I will have connected to this.